Skip to main content

Notice: This Wiki is now read only and edits are no longer possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

Jump to: navigation, search

Getting Started with Papyrus UMLLight


bottom-align


Getting Started with Papyrus UMLLight



As this is hosted on a wiki, it could be considered a work in progress... So comments, suggestions, etc. are welcome on the discussion page!


Contents



Introduction

Target audience

Papyrus UMLLight personae.

Discussions with early stakeholders enabled the Papyrus UMLLight team to identify the target audience, formalized as the following three user personae.

Papyrus UMLLight User personae.
Name Short Description Detailed description
Nicole a Papyrus novice, is knowledgeable in UML but not familiar with Papyrus or Papyrus UMLLight Nicole is already knowledgeable in UML at or above the OCUP2 Foundation or intermediate level contents.
As the project on which ze worked was completed, ze is being moved to a new team that uses Papyrus, a tool with which ze is not familiar.

Nicole's goal in using Papyrus UML Light is to quickly get familiar with Papyrus UML Light and how it supports UML-based modeling. Ze appreciates and benefits from Papyrus UML Light's streamlined editor with the most common concepts of UML, so that ze can focus on getting to know the Papyrus UML Light user interface and way of working without being exposed to the full spectrum of UML model elements.

Steve a student and novice in UML, Papyrus, and Papyrus UMLLight Steve is new to the modeling world and has no or very limited familiarity with the UML. Steve is starting to learn about UML and faces the dual tasks of learning to use UML at the same time as learning to use a UML modeling tool.

Using Papyrus UML Light, Steve will be exposed to fewer language and tool concepts at a time, which results in a lowering of the learning curve.,In addition, the alignment of Papyrus UML Light to OCUP2 (Foundational) is beneficial, as it ensures that ze first deals with the most most important concepts of UML before tackling the more complex aspects.

Brisha a basic UML User Brisha only uses UML from time to time and then only for basic purposes such as documentation or, presentations, discussions, etc. Ze is not interested in a full model-based engineering tool or method and rather uses it to "sketch" using UML to ensure common understanding of the graphics. As such, ze only needs the basic concepts of UML. In this context, an easy to use UML modeling tool such as Papyrus UML Light, which provides a reduced, targeted user interface and ease of use is easiest to adopt.

Recognize yourself in these personae? This guide is for you!

What this tutorial is and is not

what this tutorial IS What this tutorial Is NOT
An overview of the Papyrus UMLLightuser interface A UML specification tutorial (but we do talk about the UML elements we use)
An overview of the UML diagrams and elements available in Papyrus UMLLight An exhaustive tutorial on all UML diagrams, entities, and semantics
An hands-on experience developing a UML model with Papyrus UMLLight A tutorial advocating a specific method for modeling software systems

Goals

Getting Started with Papyrus UMLLight is a tutorial that will let you:

  • Learn how to download and install Papyrus UMLLight.
  • Become familiar with the various aspects of the modeling environment such as workspaces, menus, views, perspectives and palettes.
  • Become familiar with the elements that make up the“Papyrus UMLLight” UML subset.
  • Through the implementation of a sample modeling project, become familiar with a simple model development approach that will enable you to understand the usage and purpose of the elements that are provided by Papyrus UMLLight.
  • At the end of the training, the trainee will be able to contribute to an actual modeling project using Papyrus UMLLight, and will be able to more easily make the transition to other Papyrus-based tools.

Papyrus and Papyrus UMLLight

What is Papyrus

* A platform on which to build Standard-based modeling tools
* A complete open Source model editor that Conforms to Object Management Group (OMG) standards, including the UML (Unified Modeling Language)
* [An Eclipse Project [1] to manage its development.
* A family of modeling tools:
* Papyrus itself ("Papyrus")
* Papyrus for information modeling ("Papyrus-IM")
* Papyrus for Real-time ("Papyrus-RT")
* and Papyrus UMLLight

What is the Unified Modeling Language (UML)

The Object Management Group (OMG), owners of UML specification, define the purpose of the UML as:

“Providing system architects, software engineers, and software developers with tools for analysis, design, and implementation of software-based systems as well as for modeling business and similar processes.”

What is a UML model

  • a representation of a software-oriented system
  • a set of UML elements that describe your software/system’s structure and functionality

What is a UML diagram

* A UML diagram is a view of related model elements providing insight as to the structure and behavior of a software/system. Different UML diagrams present different views of the system.


Note.png
Industry support
Papyrus is supported by the Papyrus Industry Consortium, a community of developers, committers and contributors from many organizations and involved in different application domains


What is Papyrus UMLLight

A specialized variant of Papyrus that provides:

* a streamlined user interface for creating, viewing, and editing models using:
* an optimized “Foundation level” subset of UML;

Comparing Papyrus and Papyrus UMLLight Diagram Support

Papyrus vs. Papyrus UMLLight Diagrams
Papyrus PapyrusUMLDiagrams.png
Papyrus UMLLight

(highlighted diagrams are supported)
UMLLightDiagrams.png

In addition, the content of each Papyrus UMLLight diagram's palette has been modified.


Installing Papyrus UMLLight

Important.png
Java Version
You MUST have Java version 8 or higher installed in order to run Papyrus UMLLight.
Note.png
Checking Java version
To check the installed version of Java, open a command prompt/terminal and type “Java -version”. A version ‘’1.8 or higher is required.


1. Go to: https://wiki.eclipse.org/Papyrus_UMLLight#Downloads

The list of downloads for different operating environments will be displayed:
* Papyrus UML Light 0.0.1 RC2* for Windows 64bit
* Papyrus UML Light 0.0.1 RC2* for Linux 64bit
* Papyrus UML Light 0.0.1 RC2* for MacOS X 64bit
Note.png
Package version
the version displayed on the download site may be different from the one listed above - For best results, use the most recent version


Idea.png
Extracting
On MacOS and some Linux, your may need to to use “gunzip” followed by “tar xvf” to extract the archive


4. To download the archive, click on the link for your development environment.

5. Extract the executable from the downloaded archive into the proper location for applications on your operating system.

Tip: On MacOS and some Linux, you may need to use “gunzip” followed by “tar xvf” to successfully extract the archive.

6. You are now ready to start using Papyrus UML Light!


Starting Papyrus UMLLight

1. Double-click on the Papyrus UMLLight application you installed in the previous step.

2. A dialog is shown asking you to select a workspace.

Note.png
Selecting a workspace
The “Select a directory as workspace will only be displayed the first time you start Papyrus UMLLight you open Papyrus UMLLight. after that first time, Papyrus UMLLight will remember the workspaces you use and will prompt you with the lasted one opened. You can then use the “Recent workspace" prompt to access an existing workspace or create a new one by selecting a new folder from the dialog. Note that you can control the number of workspaces to remember from the Papyrus UMLLight preferences, under “Workspaces."


SelectWorkspace.png

About Workspaces

Workspaces are folders on your computer where your modeling project's files, including models, are stored.
Note.png
Note
You can have multiple workspaces defined, but only one can be used at a time. For example, you would use different workspaces for different projects. A list of recently used Workspaces can be accessed from the above dialog by clicking on "Recent Workspaces"


Selecting a workspace

1. Click on browse to select a folder that will hold your work.

2. Click “Launch” to start Papyrus UMLLight

3. The Papyrus UMLLight development environment is displayed, The first image shows the six main areas and the second, what you their use and content.

Workspace-Parts.png

Workspace-Parts-details.png

Palettes

Palettes are the toolboxes of the Papyrus UMLLight modeling environment and are found attached to the right side of the diagram area.
Note.png
Palettes
Every diagram has its own palette with the tools needed to work on the diagram.


Palette Structure

Palette Structure.png CommonTools.png

Customized Palettes

In addition to the common tools, every Papyrus UMLLight diagram has a customized palette” containing the model elements that can be used with that diagram. You can think of it as your modeling “toolbox”. Each Papyrus UMLLight diagram’s palette is customized to meet the simplification goals of Papyrus UMLLight.

Diagram Palettes

Views of all the Papyrus UMLLight Palettes (in alphabetical order)

Activity-Class-Package-Palletes.png

Sequence-StateMachine-UseCase-Palettes.png

Note.png
Commenting
The "comment node" and the "comment link" are available in all palettes. This make sense as they can be used to annotate any element



Before we go any further, let's have a look at the tutorial project so we can start implementing it!

Online Shopping System (OSS) Project Overview

Important.png
OSS Project goal
The goal of this tutorial is to familiarize the user with Papyrus UMLLight capabilities and the exercises are designed to meet this goal. As such, the system will not be implemented in its entirety as part of the tutorial. The skills you gain as you progress through the tutorial will enable you to complete the exercises on your own.


The Online Shopping System (OSS) is a web-based system that allows customers to

  • browse and search for products available in the catalogue and view their information;
  • Add/remove products to/from a virtual shopping cart;
  • View the content of the chopping cart;
  • Purchase shopping cart products using a Credit or an online payment service (e.g., PayPal)
  • Have the purchased items delivered.

Actors and use cases

Given these descriptions, we can deduce the following preliminary list of actors and use cases:

Actors Customer Customer Database Product Manager Product Database Payment Service
Use Cases Login Approve login Add product Store product information Processes payment request
Find (browse/search for) Product Remove product Store art information provide payment status
Add product to cart Update product (e.g., pricing)
View Cart List existing products (inventory)
Checkout

More use cases and actors will naturally be discovered as we go through the creation of the model that will describes the OSS system.



Use Case Modeling

Use case modeling is about visualizing the environment and requirements of the system being built.

Therefore it is about about users, their needs, and how they interact with the system being built, as well as how the OSS system interacts with other systems.

Before We start, let's understand the main concepts of use case modeling.

Basic Use Case Diagram Concepts

Basic Use Case Diagram Concepts
Nodes
Subject The subject represents the system under consideration ("OSS" in our case) to which a set of use cases applies. As such, it also represents the boundary between our system and it's interactions with the "outside world." What is inside the subject constitutes the functionality of the system and what lies outside represent elements that interact with OSS, by providing input or services.
Actor An Actor models a role played by an entity that interacts with the subject (e.g., by exchanging signals and data) but which is external to the subject, e.g., users accessing OSS or providing a service, e.g., an bank's payment service). As you can see, both people and external systems actors can be actors.
Use Case A use case is the specification of a set of actions performed by the system, which yields observable results of value to one or more actors or other stakeholders of the system. { Adapted from UML Superstructure Specification, v2.4.1}.Use cases are typically described as a sequence of steps. This sequence can be illustrated by using a sequence diagram to model the sequence of steps and can also be expressed textually (an example is provided a the end of this tutorial for those interested).
Comment Textual annotation attached to a set of elements.
Edges
Association The association relationship is used to link actors to the use cases affected by them.* The association relationship, being bidirectional, does not indicate directionality and can therefore be draw in either direction.
Generalization The “Generalization” relationship is used to specify inheritance/generalization relationships between use cases or actors.* The relationship is drawn from the specialized entity to the general entity.
Include Simplify a use case by decomposing it into smaller use cases with the goal of increasing modularity and reusability.* The include relationship is drawn from the including element to the included element.* A use case "A" included in use case"B indicates that "B" requires "A" to accomplish its goals.
Extend The extend relationship is drawn from the extender element to the extended element.* a use case "C" Extends use case "D" indicates that use case "C" is an optional part of use case D.
Comment Link The comment link is used to connect a comment to the element to which the comment applies.

Creating the OSS Use Case model

The time has come for you to start modeling!

Create and initialize the OSS Project

PUL-UseCase-Palette.png

First, you need to create a project For your OSS model:

1. From the Papyrus UMLLight main menu, select “File >New UML Light Project” to create the OSS project.

2. In the '"New UML Light Model Project" resulting dialog, set the project name to "OSS"

Note.png
Model Name
Note that the model is automatically given the same name as the project


3. Leave the location as is (default).

New UMLLightModelProjectDialog.png

4. Click on [Next] to display the"initialization information" dialog.

5. check the box left of the "Light Use Case Diagram.

This will create an empty use case diagram as part of the project creation.

New InitializeOSSwUCD.png

Stop.png
Diagram Creation
Using this dialog, you can create all the diagram you want from the start. However, at the beginning of the project, it may be difficult to determine the diagram you will actually need…and you can always create the diagrams you actually need as you model.


6. Click on "Finish."

Your project has been created and it is displayed in the workspace:

New OSSProjectCreated.png

Idea.png
Tip: Diagram names
Notice that, by default, new diagrams are named by their type. However, you can can have multiple diagrams based on each diagram type., As such, it is a good idea, to rename diagrams to something that better represent their specific content.



What was created

Before we move on, let's look at what was created...

The project Explorer

Model in Project Explorer.png

In the project explorer, There is now an entry titled "OSS" That is the project you just created as stored on disk. If you expand it, it will look like this:

Stop.png
NEVER manually edit the project explorer files (di, notation, and model)!
Thse files contain a machine-readable serialization of your model and its diagram notation that is not meant for human eyes! The only safe way to edit the model is by using Papyrus UMLLight. Trying to edit those files manually is likely to result in loss of of model information!



The Model Explorer

Start by expanding the OSS Model element in the project explorer OSSModelExplorer.png by clicking on the arrow to the left of the model elements to see the content of the model.
ModelInModelExplorer.png

The model elements under OSS have been created as part of the initial model creation.You can see that a "Light Use Case Diagram has been created as expected. In addition, Papyrus UMLLight also automatically includes a library of UML primitives that define data types. Those will be useful later in the tutorial.


Idea.png
View Synchronization
It is often useful to be able to view the same element in multiple views (e.g.the diagram, model Explorer, and Properties) to take advantage of their respective editing capabilities. The diagram and properties views are already automatically synchronized. You can do the same for the Model Explorer by using the the link to editor, double-arrow button LinkToEditor.png in its tool bar!


The workspace is now ready for the creation of the use case model

WorkspaceReadyForUCD.png

Populate the OSS Use Case Diagram

Adding the Subject
PUL-OSSSubject.png
  1. In the palette, click on the Subject PUL-Subject.png and then click in the middle of the diagram to create the subject.
  2. Note that the subject object is also visible in both the model explorer and in the Properties view. Each of these views (diagram, model explorer, and property) provide a representation of the same, single model element in each of these particular contexts. Each “view” provides a set of information about that model element.
  3. Rename the subject to "OSS" by clicking on the Subject to display its properties view and, from the the properties view, change the value of the name property to "OSS". You will notice that the name also changes in the diagram and Model Explorer.
  4. Now Click and drag an actor from the palette to a location at the left of the subject. Drag and drop is another way to place elements on a diagram.
    PUL-OSSSUCDStart.png
  5. Rename the actor to “Customer” to match the list of actors in the system.
  6. To complete this diagram, add a use case named “sign-in” to the subject and then add an association from the Customer to the use case, indicating that the customer starts the sign-in use case. The diagram should now look like this:


Idea.png
Tip: Actor locations on diagram
Actors that primarily start a use case are typically on the left of the Subject while Actors that primarily react to a use case are typically on its right (at least in "left-to-right" languages).



Complete the use case diagram

Now that you know how to add use case diagram elements, Use the information from the Actors and Use Cases table to complete the use case diagram.

Idea.png
Multiple diagrams
Using a single diagram to model all use cases would require a very large diagram that would be difficult to read (unless you have a large monitor)! Instead, it is common to use multiple diagrams, each showing a coherent subset of the model. For example, creating a distinct diagram for each actor is a common way of doing just that


Idea.png
Reuse
If you have created a model element in one diagram, you can reuse it in others diagrams by draging it from the model explorer into that diagram.


When done, Your use case diagram should be similar to: PUL-OSSSUCDComplete.png


Tips

Idea.png
Tip: Use case diagram organization
When dealing with large systems, you will nee to create multiple focused and easy to read use case diagrams. For example, creating a diagram for each actor helps ensure that their behaviours are clear and well understood.


Documentation View

The documentation view provides a mechanism to add documentation to a model element. Although this is useful in many areas of modeling, it is very helpful when doing use case analysis at the beginning of the project where you can use this capability to add textual information to better textually describe the actors and to provide a textual description of the use cases. To show the documentation view and edit its content, right-click on a model element on a diagram and select “Show Documentation view” and the Properties view will display the documentation view.

Adding documentation to a use case

  1. Right-click on the "FindProducts" use case and select "Show Documentation View" command
  2. In the "Find Products" input, add your documentation for that use case.

Example of the documentation view.

This is an example of a use case's requirements documented with using user stories. PUL-DocumentationViewSample.png

Idea.png
Pervasive Documentation
Papyrus UMLLight’s documentation capability is not limited to the use case diagram! It can be used with all model elements!

Use Case Analysis

Moving from use cases to design

What do we mean by "Use Case Analysis"?

UseCaseAnalysisPurpose.png

AnalysisMappingExample.png

Idea.png
Which diagrams to create?!
There are no rule that you have to create all four diagram listed above, or as to the number or kind of diagram you need to create! You do need to do enough to enable your team has a good idea of the structure and behaviour required to satisfy your your system's users


Using Class diagrams

PUL-Class-Palette.png

Role of Class Diagrams

Class diagrams are used to describe the structure of the software system's elements. In fact, you have already seen a class diagram - the images of the supported diagrams in Papyrus and Papyrus UMLLight are examples of lass diagrams! We use the class diagrams to represent the structure of elements we define such as the the shopping cart, and the database actors, and the information for all the products.

Creating a class diagram for the shopping Cart

1. Right-click on the OSS Model in the model explorer and add a "New light class diagram"

2. Name the diagram "Shopping Cart".

3. Add two side-by-side classes to the diagram and name them "ShoppingCart" and "Product".

4. Draw a directed association from the Shopping Cart class to the Product Class

5.
Note.png
Multiplicity


7. We already know, from the "Actors and Use Cases table", that the shopping cart can add and remove a product to the cart, so let's add these capabilities as operations on the Shopping Cart

8 . Click on the Shopping Cart and let your cursor over on the Shopping Cart

10. A little toolbox will appear above the Shopping cart -- click on the gear icon, which represents operations..

11. You will see an operation added to the bottom "(OPerations)" compartment of the class. Rename the operation "Add Product".

12. Add one more operation named: "Remove Product"

13. To add the property, Click on the property in the the palette and then click on the Shopping Cart's upper compartment.

14. Name this property "CardId". This will allow the system to keep track of the cart.

15. Using the properties

16. Both classes require a unique identifier so that multiple users can shop simultaneously - let start with the Shopping Cart: Click on an empty part of the shopping cart and when the pop-up appears, click on the box to create a new property. Click on the property and name it "ShoppingCartID.

17. left-Click on the property just created in the ShoppingCart class and select "Show Properties View", The property's properties are now shown.

18. Rename the new property to "ShoppingCartID".

19. "Click on the [...] icon to the right of the type field to display the type library. Expand the "ModelLibrary Primitive Types by clicking on the triangle on the left and select string to hold the ID. Click on OK to close the dialog.

20. Go through the same process to add the ID to the Product, naming the property "ProductID".

21. The product cart also has to be associated with the customer - so you need to create the class for the customer and link it to the shopping cart.

22. Add a class to the diagram and name it "Customer".

23.

24. Add a string field named “Customer Name" to the customer class

25. Similarly to what you did for the Shopping Cart and Product, add a customer ID attribute to the customer class.


Using activity and Sequence Diagrams

  • At the use case analysis level, Activity and Sequence diagrams are used to provide the bridge between the use case and the system design models.
  • Sequence diagrams and activity diagrams provide two complementary graphical views of use cases
* Activity diagrams focus on the description of the use cases as a workflow or process
* Sequence diagrams focus on the order of the message with regards to time.

PUL-ActivityDiagramPalette.png

Activity Diagrams

Role of Activity diagrams

The role of activity diagrams is to describe the use cases and behaviors as a sequence of 'actions' performed by the system and the different actors

Basic Activity Diagram Concepts

Refer to the activity diagram palette for the icons associated with the following model elements.

Basic Activity Diagram Concepts
Nodes
Name Description
Initial Node Acts as a starting point for executing an Activity
Input Pin Holds input values to be consumed by an Action
Output pin Holds output values produced by an Action
Value Pin Provides a value by evaluating a ValueSpecification
Opaque Action Action not specified within UML, e.g., using normal language.
Call Behavior Action Directly invokes a Behavior
Edges
Name Description
Control Flow Used to control the execution of ExecutableNodes
ObjectFlow ActivityEdge that can carry,object,tokens that may hold values

Creating an activity diagram for a customer purchase

Note.png
Background
This exercise assumes that the customer already has a shopping cart that contains products.


In this exercise, you will create an activity diagram for a customer checking out.

1. Add an an activity diagram named "customer Checkout" to the model. and rename the activity "Customer checkout."

2. Add an "initial node" to the top left of the diagram. This is where the activity Starts.

3. Add an opaque Action below and to the right of the initial node and name it " customer "to checks out.".

4. Add a decision node to the right of the opaque action

5. Draw a control flow from the opaque action to the decision node and name it : "customer signed in?"

6. Add an opaque action named "Customer Login" to the right of the decision node.

7. Add a control flow named "false" from the decision node to the Customer Login opaque behavior.

8. Add a decision node below the customer login behavior and draw a control Flow named "Login success" from customer Login to it.


9. Add an Activity Final node to the right of the last decision node and draw a control flow named "false" to it.

10. Add a merge node to the left of the "login success" decision node and below the "customer signed in" decision node and draw control flows named "true" from the two decision nodes to the merge node.

11. Add an opaque action named "OSS retrieves customer information from customer database" below the merge node and draw a control flow from the merge node to this opaque action.

12. Add an opaque action below the previous one and draw a control flow from the previous opaque action to the new one.

13. Customer confirms the existing address.

14. In the same way, add an opaque action below the previous one named "OSS asked customer to select shipping option"

15. similarly, add opaque Actions and control flows for the following opaque actions:

OSS prepares the invoice
OSS displays the final invoice
OSS processes payment
OSS Displays final transaction receipt and sends a copy to the customer's email address
OSS returns to the welcome page

16. Add an activity final node and draw a control flow from the previous opaque action to the final node.


Sequence Diagrams

==== Creating a sequence diagram for the Login use case ====
PULSequencePalette.png
Role of sequence diagrams
  • At the use case analysis level, the role of sequence diagrams is to describe the use cases as a sequence of interactions between the system and the different actors
* Sequence diagrams also include the specification of the main internal actions executed by the system in the execution of the use cases.
  • While UML provides a rich set of concepts/notations for sequence diagrams the subset provided by Papyrus UMLLight is more than adequate for our purpose.

Basic Sequence Diagram Concepts

Refer to the sequence diagram palette for the icons associated with the following model elements.

Basic Sequence Diagram Concepts
Nodes
Name Description
LifeLine A Lifeline represents a single individual participant (e.g., instance of an actor) in the sequence diagram.
Action Execution Specification The specification of a single executable unit of functionality.
Behavior Execution Specification Whereas the Action was a single unit of functionality, behaviour is a specification of events that may occur dynamically over time (e.g., an ordered set of actions, an opaque behavior, or an activity.)
Interaction Use Allows the reuse of an interaction from within another one. Tip: Often seen as an "include" relationship in the use case diagram.
Edges
Name Description
Sync Call Message A message generated by a synchronous call to an operation - a reply is automatically provided
Async Call Message A message generated by an asynchronous call to an operation. A reply message is not provide but is expected.
Reply message Used to reply to an Async Call Message
Create message Create a new lifeline
Delete message Delete (end) a an existing lifeline

Creating a sequence diagram for a Customer Login

In this exercise, you will create a sequence diagram that shows the process for the customer to logging into the OSS.

1. Add a LightSequenceDiagram to the OSS model.

2. Rename the diagram and the generated interaction to “CustomerLogin"

3. Create a “Customer" timeline By dragging the "Customer" class from the model explorer and dropping it on the left side of the sequence diagram.

Note.png
Creating timelines
Another way of creating a timeline, especially one for which you have no have model elements, is to use the “Timeline palette tool to create a timeline and then change its properties!


4. Use the timeline tool to and add a timeline to the right of the Customer timeline - be sure to leave some space to the right...

5. Find the OSS Subject in the model explorer and drop it on the new, just created timeline so that the timeline is now a representation of the OSS functionality

Stop.png
OSS Already running
We are assuming, here, that the OSS system is already running and that the login interface is displayed.


6. Draw an ‘Async Call Message’’’ from the customer timeline to the OSS timeline and rename the message Provide user identifier. This is the customer providing Their user ID.

7. Drag and drop an action execution specification specification on the OSS timeline, below "provide user identifier and name it "CheckID". This Action will let the OSS system determine if the identifier is valid.

Draw an Reply Message from the bottom of the CheckID action execution to the Customer timeline and name it "ValidID, letting the customer know that the ID is valid.

8. Draw another Async Call Message below the previous one and call it Provide password from the customer

timeline to the OSS timeline and rename the message 'Provide password. This is the customer providing their password.

9. Draw an ‘Async Call Message’’’ from the customer timeline to the OSS timeline and rename the message Password user identifier. This is the customer providing Their user ID.

10. As was done for the user identifier, add and Action Execution that will return that access is approved.

11. Add another lifeline on the right and name it Shopping Session.

12 Draw a Create message from the OSS timeline to the Shopping Session timeline.

11. Below the last message on the customer timeline, draw an Async cCall message message from the the customer to the OSS and name it Logout

12. Below the last message on the customer timeline, draw an Async message from the the customer to the OSS and name it Logout

13. Finaly, draw a delete message from the OSS to the Shopping session timeline.








State Machine Diagrams

Creating a state machine diagram for the TBD
PUL-StateMachine-Palette.png

Role of State Machine Diagrams

  • The role of State Machine Diagrams is to describe the various states of the system or its components and the possible transition between these states.

Basic State Machine Diagram Concepts

Refer to the State Machine diagram palette for the icons associated with the following model elements.

Basic State Machine Diagram Concepts
Nodes
State Formally: Situation during which an invariant condition holds. In effect, it is waiting for a signal
Initial Where the state machine starts. It will stay in that state until a message is received.
FinalState Indicate the completion of the state machine
Choice Dynamic conditional branching to select a continuing path
Junction Connect multiple Transitions into compound paths between

States

Comment Textual annotation attached to a set of elements.
Edges
Transition Represents a path from a single source element to another single element
Comment Link Represents a link from a comment to the element being commented upon.

Note.png
Precise semantics for state machines
OMG has a standard that defines the presise semantics for State machines. This is an advanced topic that is not fully covered by the Papyrus UMLLight capabilities and that will therefore not be covered in this tutorial.</a> Are you curious? Read more at: https://www.omg.org/spec/PSSM/About-PSSM/

Modeling scenario - OSS purchase delivery Statemachine

To demonstrate the creation of a state machine, we will be looking at the process of delivering a customer's the purchased goods.

Modeling scenario - OSS purchase delivery Statemachine
Event Resulting State
1. Customer is shopping (browsing/searching for products) Shopping
2. Customer adds a product to cart - OSS puts a time-limited hold on the selected product and quantity Shopping - Cart Cart stays in shopping state as products are added
3. Customer checks out and pays Checkout
4. OSS receives Payment approval Ready to package
5. Customer confirms shipping address Preparing shipment
6. Customer purchases packaged Ready to Ship
7. Package is taken over by delivery company In Transit
8. Customer signs for package Purchases delivered



Now that we have our scenario, let's create its state machine.

1. Add a Light State machine diagram to the model and name it OSS Purchase and Delivery.

2. Add an initial point in the top left corner of the diagram. This will be the starting point of your state machine execution.

3. Add a state to the right and a bit lower than the initial point and name it Shopping.

4. Draw a connector from the initial point to the Shopping state you just added. This indicates that when the state machine is started it will start in the Shopping state.

5. Add a transition that both starts and ends on the Shopping state and name it AddProduct. This kind of transition is called a self-transition and it is useful if you need to process a series of transition that do not change the state of the system.

6. Add a state to the right of the Shopping State and name it Checkout. Draw a transition from the Shopping state to this new state and name it Customer checks out and pays. This indicates that the customer has finished shopping.

7. Add a state to the right of the Checkout state, name it Prepare shipment, and add a transition from Checkout to this new state named Payment approved.

8. Add a new state named Ready to Ship below the Prepare statement shape and draw a transition from the Prepare Shipment state to this new one named Shipment packaged.

9. Add a state named InTransit' to the left of Ready to Ship' and then draw a transition named Delivery company Pickup from Ready to Ship' to this new state.

10. At a self-transition on the left side of the InTransit state named Transit updates This will be used to send delivery information and updates to the customer.

11. Finally, add a Final state named Signature receivedat the bottom of the InTransit state.

Congratulation, you have created a state machine!



Adding Structure to models

Using packages to add structure and layers to a model
  • The purpose of packages is to contain other NamedElements in order to organize a

model, typically to manage groups of similar or related model elements.

  • Examples of package usage:
* Separating common elements into logical groups
* Separating parts of the model using packages also enables reams to work in parallel on different packages (although this is out of the scope of this tutorial).
 :: An example of the use of packages can be seen in the implementation of a layered model architectures (e.g., with presentation, business, persistence layers).
* The use of packages also facilitate the visualization of a coarse level of traceability across the development lifecycle.

Package Diagram

PUL-Package-Palette.png
Build a simple package diagram for a layered model development approach

Creating the package diagram

1. Click on the model in the model explorer.

2. From the main toolbar, Select Papyrus > “New Diagram > Light Package Diagram.

3. Name the diagram “Packaging exercise” and click “OK”

4. The use case diagram has been replaced by the new diagram Package in the model editor, but is still available as a tab if you need to get back to it. As you create new diagrams, they will be listed there until you close them.

5. As well, the palette has changed to display the tools for package diagrams.

6. Using the palette, add a package at the top left of the diagram and name it “Use Case Model

7. Add another package below and slightly to the right of the Use Case Model package and name it “Design Model”.

8. Draw a dependency from the left side of the Design Model package to the bottom of the Use Case Model

9. To make the dependency look better, click in the middle of the dependency and drag left and down to make a nice elbow connector.

This dependency indicates that the “Design Model” is dependent on one or more element found in the “Use Case Model” package.

10. In the Model Explorer, you can now the use case model elements into their UseCase model package and do the same for the design models elements into the Design package.

11. Your diagram and model should look similar to:

PUL-LayersPackageDiagram.png
PUL-LayersPackageDiagramModel.png

Congratulations

PUL-Congratulations.png

Back to the top