EclipseLink Workbench Error Reference (ELUG)

For the latest EclipseLink documentation, please see http://www.eclipse.org/eclipselink/documentation/

Miscellaneous Errors (1 – 89, 106 – 133)

This section lists EclipseLink Workbench error codes, information about the likely cause of the problem, and a possible corrective action.

13: No class indicator field should be defined for the abstract class [class].; Cause: Abstract classes should not be included or contain an Indicator Value on a descriptor's Inheritance tab.; Action: You must either remove the Include option for the class on the Inheritance tab, or remove the abstract modifier option on the descriptor's Class Info – Class tab. See Descriptors and Inheritance and Configuring a Descriptor.

54: No class indicator field is selected for this root class.; Cause: You selected the Use Class Indicator Field option for the root descriptor in the inheritance hierarchy, but did not specify an indicator field for the root and its children.; Action: Use the Field Selection list on the Inheritance tab for the root class. See Descriptors and Inheritance and Configuring a Descriptor.

55: No class indicator value is defined for this included descriptor [class]; Cause: You selected the Use Class Indicator Dictionary option for the root descriptor in the inheritance hierarchy, but did not specify an indicator value for the root and its children.; Action: Use the Indicator Type list on the Inheritance tab for the root class. See Descriptors and Inheritance and Configuring a Descriptor.

89: Root class does not include an indicator mapping for this descriptor.; Cause: The root class in the inheritance hierarchy is set to the Use Class Indicator Dictionary option. The dictionary does not contain an indicator value for this child class.; Action: Select an Indicator Type on the Inheritance tab of the root class that includes the child types. See Descriptors and Inheritance and Configuring a Descriptor.

106: Mulitple mapping [mappings] write to the database field [db field] .; Cause: One database field is populated by more than one mapping; Action: Ensure the "one mapping per field" ratio for write operations.

118: The selected parent descriptor for this descriptor's inheritance policy does not have an associated inheritance policy.; Cause: Missing descriptor's inheritance policy.; Action: Ensure that the descriptor you are using has a valid associated inheritance policy (InheritancePolicy). See Descriptors and Inheritance and Configuring Inheritance for a Parent (Root) Descriptor.

123: This root class has no class indicator mappings for its hierarchy.; Cause: You created an inheritance policy with the Use Class Indicator Dictionary option but did not specify the indicator values for all subclasses.; Action: Specify the indicator values for all subclasses on the descriptor's Inheritance tab. See Descriptors and Inheritance and Configuring Inheritance for a Child (Branch or Leaf) Class Descriptor.

Note: EclipseLink displays a list of each subclass and indicator value if you have identified the subclasses' parent descriptor.

126

Writable mappings defined for the class indicator field [field name].

Cause: You selected the Use Class Indicator Field option for the root descriptor in the inheritance hierarchy, but the mappings for this field are writable.

Action: Select a Use Class Indicator Field on the descriptor's Inheritance tab that does not contain any writable mappings. See the following:

132: The implemented interface [interface] is not an interface.; Cause: You selected a noninterface (a class) as an implemented interface.; Action: Ensure that you select an interface. See Descriptors and Inheritance and Configuring a Descriptor.

133: The superclass for [class] is an interface, classes cannot extend interfaces.; Cause: You selected an interface instead of a class as a parent for your child class.; Action: Use the Inheritance tab for the root class. See Descriptors and Inheritance and Configuring a Descriptor.

Project Errors (100 – 102)

This section lists EclipseLink Workbench project errors.

100: The project caches all statments by default for queries, but does not bind all parameters.; Cause: A named query that caches statements must also bind parameters.; Action: On the Named Queries – Options tab, change the Cache Statement field to False, or change the Bind Parameters field to True. See Configuring Named Query Options.

101: The project uses a custom sequence table, but the counter field is not specified.; Cause: On the project's Sequencing tab, you selected Use Custom Sequence Table, but did not complete the Counter Field field.; Action: Select the field to use as the Counter Field for this sequence table. See Configuring Sequencing at the Project Level for details.

102: The project uses a custom sequence table, but the name field is not specified.; Cause: On the project's Sequencing tab, you selected Use Custom Sequence Table, but did not complete the Name Field field.; Action: Select the field to use as the Name Field for this sequence table. See Configuring Sequencing at the Project Level for details.

Descriptor Errors (200 – 399)

This section lists EclipseLink Workbench descriptor errors.

200: The descriptor's class is not public.; Cause: The descriptor must use a public access modifier.; Action: On the descriptor's Class Info – Class tab, change the Access Modifier option to Public. See How to Configure Classes and Configuring Class Modifiers.

201: This class is a subclass of a final class.; Cause: If you select the Final option on the descriptor's Class Info – Class tab for a class, then the class cannot contain subclasses.; Action: See How to Configure Classes and Configuring Class Information.

210: Two methods [method name1] [method name2] cannot have the same signature.; Cause: You created methods with identical signatures.; Action: On the Class Info – Methods tab, change the information for one of the methods. See How to Configure Classes and Adding Methods.

211: The format for [date] must be in the format HH-MM-SS or HH:MM:SS. Literal argument of expression [line number] on query [query name] is invalid.; Cause: You attempted to use an invalid argument on a query.; Action: Use HH-MM-SS or HH:MM:SS format. See Type Conversion Converter and Configuring a Type Conversion Converter.

212: The format for [date] must be in the format YYYY/MM/DD HH:MM:SS or YYYY-MM-DD HH:MM:SS. Literal argument of expression [line number] on query [query name] is invalid.; Cause: You attempted to use an invalid argument on a query.; Action: Use YYYY/MM/DD HH:MM:SS or YYYY-MM-DD HH:MM:SS format. See Type Conversion Converter and Configuring a Type Conversion Converter.

213: The format for [date] must be in the format YYYY/MM/DD or YYYY-MM-DD. Literal argument of expression [line number] on query [query name] is invalid.; Cause: You attempted to use an invalid argument on a query.; Action: Use YYYY/MM/DD or YYYY-MM-DD format. See Type Conversion Converter and Configuring a Type Conversion Converter.

214: The format for [date] must be in the format YYYY/MM/DD HH:MM:SS, YYYY/MM/DD, or YYYY-MM-DD. Literal argument of expression [line number] on query [query name] is invalid.; Cause: You attempted to use an invalid argument on a query.; Action: Use YYYY/MM/DD HH:MM:SS, YYYY/MM/DD, or YYYY-MM-DD format. See Type Conversion Converter and Configuring a Type Conversion Converter.

215: The format for [argument] must be an even length HEX string. Literal argument of expression [line number] on query [query name] is invalid.; Cause: You attempted to use an invalid argument on a query.; Action: Use HEX format. See Type Conversion Converter.

216: The format for [argument] must be a string. Literal argument of expression [line number] on query [query name] is invalid.; Cause: You attempted to use an invalid argument on a query.; Action: Use a String. See Type Conversion Converter.

217: Literal argument of expression [line number] on query [query name] is invalid. The format is illegal.; Cause: You attempted to use an invalid argument on a query.; Action: Use a valid format.

220: An aggregate shared by multiple source descriptors cannot have one-to-many or many-to-many mappings.; Cause: You attempted to create multiple one-to-many and many-to-many, or one-to-one mappings in which the target is the aggregate. Aggregate descriptors that are shared by multiple source descriptors cannot have mappings that contain a target object that references the descriptor.; Action: For aggregate descriptors that are shared by multiple source descriptors, remove mappings that contain a target object that references the descriptor. See Descriptors and Creating Relational Aggregate Descriptors.

221: Classes cannot reference an aggregate target with one-to-one, one-to-many, or many-to-many mappings.; Cause: You tried to select an aggregate descriptor as a reference.; Action: Do not select an aggregate descriptor as the Reference Descriptor for a one-to-one, one-to-many, or many-to-many mapping. See Descriptors and Creating Relational Aggregate Descriptors.

225: The implementor [implementor name] no longer implements this interface.; Cause: One descriptor listed as an implementation method for this interface descriptor no longer implements this descriptor's interface.; Action: Either remove the descriptor from the list of implementation methods or alter the descriptor's class so that it implements this descriptor's interface. See Descriptors and Creating Relational Interface Descriptors.

230: No primary table is specified.; Cause: The descriptor is not associated with a database table.; Action: On the descriptor's Descriptor Info tab, use the Associated Table field to select a primary table. See Configuring Associated Tables.

231: No primary key(s) specified in [table name] table.; Cause: You did not specify a primary key for each database table. When importing tables from a database into EclipseLink Workbench, the primary key information will be retained only if the JDBC driver supports the getPrimaryKeys method.; Action: Ensure that a primary key is specified for each descriptor on the Descriptor Info tab. See Configuring Associated Tables.

232: The following primary key field is unmapped [field name].; Cause: The primary key field does not have a writable mapping.; Action: Ensure that the primary key(s) are mapped. See Configuring Associated Tables.

233: The number of primary keys does not match the number of primary keys on the parent.; Cause: In an inheritance hierarchy, the child class does not have the same number of primary keys as the parent class.; Action: Ensure that the parent and child class have the same number of primary keys on the descriptor's Descriptor Info tab. See Configuring Associated Tables.

234: The primary keys do not match parent's primary keys.; Cause: In an inheritance hierarchy, the child's primary key(s) does not match the root's primary key(s).; Action: Ensure that each child's Primary Key on the Descriptor Info tab matches the parent's primary key. Ensure that the parent and child class have the same primary keys on the descriptor's Descriptor Info tab. See Configuring Associated Tables.

235: The following primary field field does not have writable mappings: [field name].; Cause: You attempted to have multiple mappings write to the same database field.; Action: Ensure that each database field has a single, writable mapping. See Configuring a Relational Descriptor.

236: No sequence field is selected.; Cause: You selected Use Sequencing on a descriptor's Descriptor Info tab, but did not specify the sequence information.; Action: Specify a Name, Table, and Field. See Configuring Sequencing at the Descriptor Level.

237: No sequence name is selected.; Cause: You selected Use Sequencing on a descriptor's Descriptor Info tab but did not specify the sequence information.; Action: Specify a Name, Table, and Field. See Configuring Sequencing at the Descriptor Level.

238: No sequence table is selected.; Cause: You selected Use Sequencing on a descriptor's Descriptor Info tab but did not specify the sequence information.; Action: Specify a Name, Table, and Field. See Configuring Sequencing at the Descriptor Level.

239: The selected sequence table is not one of the descriptor's associated tables.; Cause: The tabled used for sequencing is not associated with the descriptor.; Action: You must either associate the sequencing table with the descriptor, or select a table that is already associated with the descriptor. SeeConfiguring Sequencing at the Descriptor Level and Configuring Associated Tables.

240: Two queries [query name1] [query name2] cannot have the same signature.; Cause: Two queries for this descriptor share the same signature (query name + parameter names). This is not allowed.; Action: You must either remove one of the queries, rename one of the queries, or change the parameters so that the signatures no longer match.

241: The query [query name] has Cache Statement set to true, but does not bind parameters.; Cause: A named query that caches statements does not bind parameters. It must do so.; Action: On the Named Queries – Options tab, either change the Cache Statements field to False, or change the Bind Parameters field to True. See Configuring Named Query Options.

242: The query [query name] does not maintain cache but does refresh the remote identity map results.; Cause: The query has Refresh Remote Identity Map selected, but does not have Maintain Cache selected.; Action: You must either select Maintain Cache for the descriptor, or deselect Refresh Remote Identity Map. See Configuring Named Query Options.

243: The query [query name] does not maintain cache but does refresh the identity map results.; Cause: The query has Refresh Identity Map selected but does not have Maintain Cache selected.; Action: You must either select Maintain Cache for the descriptor, or deselect Refresh Identity Map. See Configuring Named Query Options.

245: The query [query name] refreshes identity map results but does not refresh remote identity map results.; Cause: Refresh Identity Map Results is selected for the query, but Refresh Remote Identity Map Results is not.; Action: You must either select Refresh Remote Identity Maps or deselect Refresh Identity Maps. See Configuring Named Query Options.

246: The query key [query key] does not have an associated database field.; Cause: The query key is missing an associated database field. Each query key must be associated with a database field.; Action: On the Query Keys tab, use the Field option to select a database field for the query key. See Configuring Query Keys.

247: The database field selected for query key [query key] does not exist on this descriptor's associated tables.; Cause: The database field selected for this query key does not exist on this descriptor's associated tables. Each database field associated with a query key must exist on database table associated with the query key's descriptor.; Action: You must either change the database field associated with the query key, or associate the descriptor with a database table that includes the database field associated with the query key. See Configuring Query Keys.

248: The expression [line number] on query [query name] is invalid because a parameter has not been specified.; Cause: One of the arguments in the query expression is missing or invalid.; Action: Edit the query and ensure that all query keys and parameters have been specified. See Configuring Query Keys.

249: The expression [line number] on query [query name] is invalid because a query key has not been specified.; Cause: One of the arguments in the query expression is missing or invalid.; Action: Edit the query and ensure that all query keys and parameters have been specified. See Configuring Query Keys.

250: The expression [line number] on query [query name] is invalid because the chosen query key is not a valid mapping type in an expression.; Cause: One of the arguments in the query expression is invalid.; Action: Edit the query and ensure that all query keys and parameters have been specified. See Configuring Query Keys.

251: The expression [line number] on query [query name] is invalid. When querying on a reference mapping, only unary operators (Is Null, Not Null) are supported.; Cause: You created an expression node that includes a reference mapping with an invalid operator.; Action: On the Expression Builder dialog box, select the node and change the Operator field to IS NULL or NOT NULL.

252: The query [query name] has no attribute chosen for the ordering attribute at index [index].; Cause: The ordering attribute is missing from the query.; Action: Edit the query and add an ordering attribute. See Configuring Read All Query Order.

253: The ordering attribute {0} for query {1} is not valid. ReadAllQuery ordering items must be either query keys or direct-to-field mappings.; Cause: The ordering attribute is invalid.; Action: Edit the query and ensure that ordering attribue is a query key or has a direct-to-field mapping. See Configuring Read All Query Order.

254: The query {0} has no attribute chosen for the joined attribute at index {1}.; Cause: The joined attribute is missing from the query.; Action: Edit the query and add a joined attribute. See Configuring Named Query Optimization.

255: The joined attribute {0} for query {1} is not valid. Joined attributes must be 1-1, 1-m, m-m, direct collection, or aggregate collection mappings.; Cause: The joined attribute is invalid.; Action: Edit the query and ensure that joined attribute has a one-to-one, one-to-many, many-to-many, direct collection, or aggregate collection mapping. See Configuring Named Query Optimization.

256: The query {0} has no attribute chosen for the batch read attribute at index {1}.; Cause: The batch read attribute is missing from the query.; Action: Edit the query and add a batch read attribute. See Configuring Named Query Optimization.

257: The batch read attribute {0} for query {1} is not valid. Batch read attributes must be 1-1, 1-m, m-m, direct collection, aggregate collection, or direct-to-field mappings.; Cause: The batch read attribute is invalid.; Action: Edit the query and ensure that batch attribute has a one-to-one, one-to-many, many-to-many, direct collection, aggregate collection, or direct-to-field mapping. See Configuring Named Query Optimization.

258: The query {0} has no attribute chosen for the grouping attribute at index {1}.; Cause: The grouping attribute is missing from the query.; Action: Edit the query and add a grouping attribute. See Configuring Named Query Group/Order Options.

259: The query {0} has no attribute chosen for the report attribute {1}.; Cause: The report query attribute is missing from the query.; Action: Edit the query and add a report query attribute. See Configuring Named Query Group/Order Options.

260: The report attribute {0} for query {1} is not valid. Report query attributes must be either query keys or direct mappings.; Cause: The report attribute is invalid.; Action: Edit the query and ensure that report attribute is a query key or has a direct-to-field mapping. See Configuring Named Query Group/Order Options.

262: The format for {2} must be between 0 and 127 inclusive. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of second argument in Expression Builder. The literal value of a Byte type must be between 1 and 127. See Creating an Expression.

263: The format for {2} must be either 'true' or 'false'. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of Second Argument in Expression Builder. The literal value of a Boolean type must be true or false. See Creating an Expression.

264: The format for {2} must be a single character. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of second argument in Expression Builder. The literal value of a Character type must be a single character. See Creating an Expression.

265: The format for {2} must be between {3} and {4}. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of second argument in Expression Builder. The literal value must be between 3 and 4. See Creating an Expression.

266: The format for {2} must be a string. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of second argument in Expression Builder. The literal value of a String type must be a string. See Creating an Expression.

267: The format for {2} must contain only digits, '-', and '.'. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid..; Action: Edit the literal value of second argument in Expression Builder. The literal value of a Double or Float type must contain digits, ' - ', and ' . '. See Creating an Expression.

268: The format for {2} must contain only digits, '-', and '.'. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of second argument in Expression Builder. The literal value of a Double or Float type must contain digits, ' - ', and ' . '. See Creating an Expression.

269: The format for {2} must be in the format YYYY/MM/DD or YYYY-MM-DD. Literal argument of expression (line {0}) on query {1} is invalid.; Cause: The literal value of the expression is invalid.; Action: Edit the literal value of second argument in Expression Builder. The literal value of a Date type must be in YYYY/MM/DD or YYYY-MM-DD format. See Creating an Expression.

270: No schema context is specified.; Cause: Each descriptor in an XML or EIS project must be associated with an XML schema context.; Action: Select the EIS or XML descriptor in the Navigator and complete the Schema Context field on the Descriptor Info tab.

271: The descriptor represents a document root object, but no default root element is chosen.; Cause: Each root descriptor must have a default root element.; Action: On the descriptor's Descriptor Info tab, complete the Default Root Element field.

280: A descriptor that represents \"anyType\" cannot support inheritance.; Cause: The descriptor was supporting inheritance.; Action: Edit the descriptor properties and remove the inheritance support.

281: A descriptor that represents \"anyType\" may contain only a single Any (Object or Collection) mapping.; Cause: The descriptor was supporting more than one Any (Object or Collection) mapping.; Action: Edit the descriptor properties and ensure that descriptor supports only one Any (Object or Collection) mapping.

282: A default root element type has been selected and the default root element is not. Either select a default root element or clear the default root element type; Cause: The default root element was not selected.; Action: Select the default root element or clear the default root element type. See Configuring Default Root Element.

290: No primary keys specified.; Cause: Although you have associated the descriptor with a database table, you have not identified the primary keys.; Action: Use the Primary Keys area of the descriptor's Descriptor Info tab to select the primary keys for the descriptor.

291–304: The event policy's [method type] method is no longer a visible member of this descriptor's associated class.; Cause: You changed the class hierarchy within the project, causing the method to no longer be visible to the class.; Action: Ensure that the selected method is visible to the class.

305: The write-lock field is stored in an object, but there is not a writable mapping to the field.; Cause: If the write lock field is stored in object, there must be a non-read-only mapping to it.; Action: On the mapping's General tab, ensure that Read-Only is not selected.

306: Database fields specified for Selected Fields type Locking Policy must be mapped: [field name]; Cause: You selected an unmapped database field for a descriptor's locking policy.; Action: On the descriptor's Locking tab, ensure that you have selected a mapped database field as the Selected Field. See Configuring Locking Policy.

307: Database fields specified for Selected Fields type Locking Policy must not be primary key fields: [field name]; Cause: The database fields you selected for the optimistic locking policy (by fields) contains the primary keys for the database table.; Action: In the By Fields area of the descriptor's Locking tab, select different fields. See Configuring Locking Policy.

308: Version locking is chosen as the Locking Policy, but the field is not specified.; Cause: If you select to use version locking with an optimistic locking policy, you must identify which database field to use for version control.; Action: Use the Database Field field on the descriptor's Locking tab to select a field to use for version control. See Configuring Locking Policy.

309: The Version Locking database field selected does not exist on this descriptor's associated tables.; Cause: The database field you selected for optimistic version locking does not exist on the descriptor's associated table.; Action: You must either select a different database field on the descriptor's Locking tab, or associate the descriptor with a different database table. See Configuring Locking Policy.

310: Database fields specified for Selected Fields type Locking Policy do not exist on this descriptor's associated tables: [field name]; Cause: The database fields you selected for the optimistic locking policy (by fields) do not exist on the descriptor's associated table.; Action: You must either select a different database field on the descriptor's Locking tab, or associate the descriptor with a different database table. See Configuring Locking Policy.

311: The method you have specified for the instantiation policy's method on this descriptor is no longer a visible member of this class.; Cause: The method selected as the instantiation method has either been removed, or its visibility has been reduced so that it is no longer publicly visible.; Action: Deselect this method as the instantiation method. See Configuring Locking Policy.

312: The method you have specified for the instantiation policy's factory instantiation method on this descriptor is no longer a visible member of this class.; Cause: The method selected as the factory instantiation method has either been removed, or its visibility reduced so that it is no longer publicly visible.; Action: Deselect this method as the factory instantiation method. See Configuring Instantiation Policy.

313: The method you have specified for the instantiation policy's factory method on this descriptor is no longer a visible member of this class.; Cause: The method selected as the factory method has either been removed, or its visibility reduced so that it is no longer publicly visible.; Action: Deselect this method as the factory method. See Configuring Instantiation Policy.

314: "Use factory" is specified for the Instantiation policy, but all required information is not specified.; Cause: You selected the Use Factory option on the descriptor's Instantiation Policy tab, but did not specify the Factory Class, Factory Method, or Instantiation Method fields.; Action: Complete the Factory Class, Factory Method, or Instantiation Method fields on the descriptor's Instantiation tab. See Configuring Instantiation Policy.

315: "Use method" is selected for the Instantiation policy, but no method is selected.; Cause: You selected the Use Method option on the descriptor's Instantiation Policy tab, but did not specify the field.; Action: Select the Method on the descriptor's Instantiation tab. See Configuring Instantiation Policy.

316: The class does not have an accessible zero argument constructor.; Cause: No accessible zero argument constructor exists for the class associated with this descriptor.; Action: Make the zero argument constructor accessible if it exists, or create a accessible zero argument constructor if it doesn't exist.

317: No method was specified for the copying policy.; Cause: You specified that the descriptor should use a specific clone method for copying, but you did not select a method.; Action: Complete the Use Clone Method field on the descriptor's Copying tab to select a method.

318: The method specified for the copy policy on this descriptor is no longer a visible member of this class.; Cause: You changed the class hierarchy within the project, causing the copy policy to no longer be visible to the class.; Action: Ensure that the copy policy is visible to the class.

319: Primary keys do not match across associated tables and no reference(s) specified in multiple table policy information.; Cause: You attempted to associate multiple tables using a primary key.; Action: Primary key field names must match across associated tables, or references must be defined from the base table to each derived table.

320: The multiple table reference should be defined from the base table [table name] to the derived table.; Cause: This descriptor has Inheritance and Multitable advanced properties defined on it.; Action: The multiple table relationship that is defined between the base class' table and this derived class' table must be defined from base to derived.

321: The multiple table reference should not be defined on the database.; Cause: When using multitables with differently named primary keys, you must set a reference from the TOP table to the BOTTOM table. This reference must not be an actual constraint on the database.; Action: Select the table in which this is defined, and deselect the On Database option.

322: A class containing the desired after loading method should be specified.; Cause: You added an after-load method to a descriptor, but you did not specify a class.; Action: Complete the After Load tab. See Configuring Amendment Methods.

323: An after-load method must be specified.; Cause: You added an after-load method to a descriptor, but did not select an amendment method.; Action: Complete the After Load tab. See Configuring Amendment Methods.

324: An interface class must be specified for the interface alias.; Cause: You added an interface alias to a descriptor, but did not select an amendment method.; Action: Complete the Interface Alias tab.

325: The inheritance hierarchy originating in this descriptor cannot contain both aggregate and nonaggregate child descriptors.; Cause: Aggregate and class descriptors cannot be in the same inheritance hierarchy.; Action: Ensure that the inheritance hierarchy contains either aggregate or nonaggregate children, but not both.

326: The inheritance hierarchy originating in this descriptor cannot contain both root and composite child descriptors.; Cause: There is a mixture of root and composite descriptors among the descendents of this descriptor.; Action: Make all descendents of this descriptor the same type by either making them all root, or making them all composite. You can do this by removing the differing descriptor from the hierarchy, or changing their type to be consistent with the other descriptors in the hierarchy.

330: The returning policy insert fields do not exist on this descriptor's associated tables: [field name]; Cause: The field you selected on the descriptor's Returning tab does not exist on the database table associated with the descriptor.; Action: Select a different database table in the Insert area of the descriptor's Returning tab.

331: The returning policy update field [field name] does not exist on this descriptor's associated tables.; Cause: The field you selected on the descriptor's Returning tab does not exist on the database table associated with the descriptor.; Action: Select a different database table in the Update area of the descriptor's Returning tab.

350: Descriptors with Unknown Primary Keys must use sequencing.; Cause: Unknown Primary Key Class is selected for this descriptor, but the descriptor does not use sequencing.; Action: Change the descriptor so that it uses sequencing, or so that it no longer uses an unknown primary key class.

Mapping Errors (400 – 483)

This section lists EclipseLink Workbench mapping errors.

400: Method accessors have not been selected.; Cause: You selected Use Method Accessing for a mapping, but you did not select a method.; Action: You must select a Get and Set method on the mapping's General tab. See Configuring Method or Direct Field Accessing at the Mapping Level.

401, 402: The [get/set access method] method for this mapping's method accessing field is no longer visible to this descriptor.; Cause: You changed the class hierarchy within the project, causing the method access type (get or set) to no longer be visible to the class.; Action: Ensure that the selected method is visible to the class.

403: Mappings for EJB 2.0 CMP descriptors that use Value Holder Indirection must not use method accessing.; Cause: You cannot use method accessing on mappings for EJB 2.0 CMP descriptors that use ValueHolder Indirection.; Action: Because EJB attributes are code-generated, reference mappings should not be set to use method access. The attributes are code-generated to be of type ValueHolder but the abstract methods are defined to return the local interface type of the related bean.

404: Mapping references a write-lock field, but it is not read-only.; Cause: You specified a locking policy for a descriptor, but one of the attribute mappings is not read-only.; Action: Select the Read Only option on the mapping's General tab.

410: No direct field is specified.; Cause: For direct collection mappings, you must specify the direct collection information.; Action: Select a Target Table and Direct Field that the direct collection specifies.

415: No direct key field is specified.; Cause: For direct map mappings, you must specify a direct key field in the reference table that stores the primitive data value of the map key.; Action: On the direct map mapping's General tab, select a Direct Key Field. See Configuring Direct Key Field.

420: No database field is selected.; Cause: You created a direct-to-field or type conversion mapping without selecting a database field.; Action: For attributes with direct-to-field mappings, you must specify a Database Field on the mapping's General tab. For attributes with type conversion mappings, you must specify a Database Field on the mapping's General tab.

421: The selected database field does not exist on this descriptor's associated tables.; Cause: The database field mapped to an attribute is not included in the table associated with the attribute's descriptor.; Action: Ensure that the Database Field field on a mappings General tab is included in the table that you associated with the attribute's descriptor. See Configuring Associated Tables and Configuring a Database Field.

430, 431: No null value type has been selected.; Cause: You selected to Use Default Value When Database Field is Null for a mapping, but did not specify the value.; Action: Specify a default Type or Value, or both on the mapping's General tab. See Configuring a Default Null Value at the Mapping Level. This message may also appear after using the Package Rename tool when upgrading an older EclipseLink Workbench project.

440: XML type mappings are supported only on the Oracle9i Platform.; Cause: You created a Direct to XML Type mapping in relational project that uses a non-Oracle9i database.; Action: Select an Oracle9i platform as the database platform for the data source. See Configuring Relational Database Platform at the Project Level.

450: No reference descriptor is selected.; Cause: You created a mapping, but did not specify the reference descriptor; Action: You must select a Reference Descriptor for each relationship mapping on the mapping's General tab.

451: [descriptor name]references [descriptor name], which is not active.; Cause: You tried to select an inactive descriptor as a Reference Descriptor on the mapping's General tab.; Action: You must either select a new Reference Descriptor, or make the descriptor active.

460: No table reference is selected.; Cause: You created a relationship mapping, but did not specify a reference table.; Action: Select (or create) a table reference for each relationship mapping on the mapping's Table Reference tab.

461: Table reference is invalid.; Cause: The table reference selected for this mapping is invalid.; Action: Select a different table reference for this mapping.

462: The reference [table reference] does not have any field associations.; Cause: You selected a table reference for a mapping, but did not add a key pair.; Action: You must specify source and target key pairs for the reference.

463: A key pair has not been completely specified for a reference.; Cause: You created a table reference without a key pair.; Action: You must specify a foreign key reference for the database table. Use the database table's Reference tab to add a key pair.

464: No relationship partner is specified.; Cause: You selected the Maintains Bidirectional Relationship option for a relationship mapping, but did not select a mapping to use as the relationship partner.; Action: Select a mapped attribute (from the reference descriptor) for this relationship. See Configuring Bidirectional Relationship.

465: The relationship partner must be a one-to-one, one-to-many, or many-to-many mapping.; Cause: You selected an invalid attribute as the Relationship Partner in a bidirectional relationship.; Action: In the Relationship Partner field, select a one-to-one, one-to-many, or many-to-many mapping. See Configuring Bidirectional Relationship.

466: The specified relationship partner mapping does not specify this mapping as its own relationship partner.; Cause: Maintains Bidirectional Relationship is selected for this mapping, but the mapping selected as the relationship partner does not have this mapping selected as its relationship partner.; Action: You must either select a different mapping for this mappings relationship partner, which has this mapping selected as it bidirectional relationship partner, or select this mapping as the bidirectional relationship partner of the mapping selected as the bidirectional relationship partner for this mapping.

467: The chosen reference descriptor is not a valid reference descriptor for this mapping.; Cause: The descriptor selected as the reference descriptor for this mapping is not a valid reference descriptor.; Action: Select a valid reference descriptor for this mapping.

470: No container class is selected.; Cause: No container class has been selected for this collection mapping.; Action: Select a Container class for this Collection mapping.

471: The container policy uses a Collection class, but the container class is not a Collection.; Cause: The selected container class for this collection mapping is not a Collection, but Use Collection Class is selected.; Action: Select a Container class that is a Collection for this mapping.

472: The container policy uses a Map class, but the container class is not a Map.; Cause: The selected Container class for this Collection mapping is not a Map class, but Use Map Class is selected.; Action: Select a Container class that is a Map class.

473: The container class must be instantiable.; Cause: The selected Container class for this Collection mapping is not instantiatable.; Action: Select a Container class this is instantiatable, (not an Interface, Abstract class, or Primitive class).

474: The container class does not agree with the instance variable.; Cause: The selected Container class for this Collection mapping, does not agree with the instance variable that is associated with the mapping. Either the variable is a Map class and the selected Container class is a Collection or vice versa.; Action: You must either select a Container class that agrees with the type of instance variable with which it is associated, or change the instance variable to agree with the selected Container class.

475: The container class is a Map, but the key method is not selected.; Cause: Use Map Class is selected for the Container policy for this Collection mapping, but a key method has not been selected.; Action: You must either select a key method for this Container policy, or change the Container policy to not use a map class.

4 76: The key method specified for this mapping is no longer visible to the owning descriptor's class.; Cause: The selected key method for the Container policy for this Collection mapping policy is not visible to the descriptor's class.; Action: You must either select a different method that is visible to the descriptor's class, or change the selected method so that it is visible.

477: The key method specified for this mapping is not valid.; Cause: The selected key method for the Container policy for this Collection mapping is invalid because it does not have the correct return type, or it does not accept more than zero parameters.; Action: You must either select a different method that is valid, or change the selected method so that it will return the correct type and accept more than zero parameters.

478: One-to-Many and Many-to-Many mappings in EJB 2.0 CMP descriptors may not use ValueHolder indirection.; Cause: A one-to-many or many-to-many mapping in an EJB 2.0 CMP descriptor is using ValueHolder indirection.; Action: You must either change the mapping to use no indirection or non-ValueHolder indirection.

480: No relation table is selected.; Cause: You created a many-to-many mapping, but did not specify a relation table. The relation table represents the relationship between the primary keys of the source table and target table.; Action: Select or create a Relation Table on the mapping's General tab.

481: The relation table is not dedicated to single, writable many-to-many mapping.; Cause: More than one many-to-many mapping in the project are using the same relation table.; Action: Each relation table should be used in one and only one many-to-many mapping.

482: No source reference is selected.; Cause: You created a many-to-many mapping, but did not select (or create) a source table reference on the mapping's Source Reference tab.; Action: The source table reference must contain a Source field (from the mapping's relation table) and a Target field (from one of the descriptor's associated tables).

483: No target reference is selected.; Cause: You created a many-to-many mapping, but did not select (or create) a target table reference on the mapping's Source Reference tab.; Action: The target table reference must contain a Source field (from the mapping's relation table) and a Target field (from one of the descriptor's associated tables).

Table Errors (500 – 610)

This section lists EclipseLink Workbench table errors.

500: You cannot use joining because the source and target (reference) descriptors are the same type.; Cause: You selected the Use Joining option on a one-to-one mapping in which the source and reference descriptors are the same.; Action: You must either deselect the Use Joining option or select a difference Reference Descriptor on the One-to-One Mapping General tab.

510: No query key associations have been defined.; Cause: You created a variable one-to-one mapping, but did not define a key pair.; Action: Create or select a key pair on the mapping's Query Key Association tab.

511: Not all query key associations have foreign key fields specified.; Cause: You created a query key association without a foreign key.; Action: You must specify a foreign key field for each query key association on the Query Key Association tab for variable one-to-one mapping.

512: The following specified query key names are no longer valid: [query key]; Cause: The query keys listed for this mapping no longer refer to the reference descriptor for this mapping. The query keys are now invalid.; Action: You must either remove the invalid query keys, or change the reference descriptor so that it corresponds with the query keys.

513: No indicator field is selected.; Cause: You created a variable one-to-one mapping, but did not specify a database field in which to store indicator values.; Action: Select the Class Indicator Field on the Class Indicator Info tab.

514: No indicator values are specified.; Cause: You created a variable one-to-one mapping, but did not specify indicator values for each object type.; Action: Select the Indicator Type on the Class Indicator Info tab.

515: [descriptor name] is not an implementor of the [descriptor name] interface, so it cannot have an indicator value.; Cause: You included a descriptor on the Variable One-to-One Class Indicator Info tab that is an implementor.; Action: Deselect the descriptor on the Variable One-to-One Class Indicator Info tab or add the descriptor to the Implementor tab.

516: The chosen reference descriptor is not an interface descriptor.; Cause: This variable one-to-one mapping has a reference descriptor selected which is not an interface descriptor. The reference descriptor for a variable one-to-one mapping must be an interface descriptor for the mapping to be valid.; Action: You must either choose a reference descriptor that is an interface descriptor, or change the mapping to no longer be variable.

520: No attribute transformer is specified.; Cause: No attribute transformer is specified for this transformation mapping.; Action: Select an attribute transformer for this transformation mapping.

521: The attribute transformer class is missing.; Cause: No class has been specified for the attribute transformer for this transformation mapping.; Action: Select a class for the attribute transformer.

522: The attribute transformer class [class name] is not a valid transformer class.; Cause: The attribute transformer class that is selected is not a valid attribute transformer class.; Action: Select a valid attribute transformer class for the transformation mapping.

523: The attribute transformer method is missing.; Cause: No method has been selected for the attribute transformer for the transformation mapping.; Action: Select a method for the attribute transformer.

524: The attribute transformer method [method name] is not visible to the parent descriptor's class.; Cause: The selected attribute transformer method is not visible to the descriptor class for this mapping.; Action: You must either select a different method that is visible, or change the method in the class to make it visible.

525: The attribute transformer method [method name] is not a valid transformer method.; Cause: The selected attribute transformer method either has the wrong return type or accepts the wrong parameters to be a valid transformer method for this transformation mapping.; Action: You must either select a method with the correct return type and parameters, or change the selected method so that it meets these criteria.

526: No field transformer associations are specified.; Cause: No field transformer association has been specified for this transformation mapping.; Action: Specify at least one field transformer association.

527: No transformer is specified for the field [field name].; Cause: No transformer specified for the given field.; Action: Specify a transformer for this field.

528: There is a missing field in the field transformer association.; Cause: There is no field specified for a field transformer association for this transformation mapping.; Action: Specify a field for all the field transformer associations for this transformation mapping.

529: There is a missing transformer class for the field [field name].; Cause: The Transformer class is specified for this field transformer association, but the Transformer class is unspecified.; Action: Specify a Transformer class for the field transformer association for this field.

530: The transformer class [class name] for the field [field name] is not a valid transformer class.; Cause: The specified Transformer class for the field of this field transformer association is invalid.; Action: Specify a valid Transformer class for the field transformer association for this transformation mapping.

531: There is a missing transformer method for the field [field name].; Cause: A transformer method is specified for this field transformer association, but the transformer method is unspecified.; Action: Specify a transformer method for the field transformer association for this field.

532: The transformer method [method name] for the field [field name] is not visible to the parent descriptor's class.; Cause: The specified transformer method for the field transformer association for this field is not visible to the descriptor or the class of this mapping.; Action: You must either choose a method that is visible to the class, or change the method so that it is visible.

533: The field transformer method [method name] for the field [field name] is not a valid transformer method.; Cause: The specified method for the field transformer association for this field either has the incorrect return type, or accepts the wrong parameters.; Action: You must either select a method that has the correct return type and parameters, or change the currently selected method so that is has the correct return type and parameters.

540: No object type is selected.; Cause: You created an object type mapping, but did not select the type.; Action: You must select the Object Type and Database Type on the General tab of the mapping.

542: No object-type mappings have been specified.; Cause: You created an object type mapping, but did not create n object-to-database mapping.; Action: You must specify at least one mapping (Database Value and Object Value) on the General tab of the mapping.

545: NCharacter, NString, and NClob database types are currently supported only on the Oracle9i platform.; Cause: You attempted to map a database type that is not supported by your database.; Action: The database type for a type conversion mapping or direct-to-field mapping can be NCharacter, NString, or NCLOB only if you are using an Oracle9i database.

550: Attribute is typed as a ValueHolderInterface, but the mapping does not use Value Holder Indirection.; Cause: You did not specify indirection or transparent indirection for the mapping.; Action: If the class attribute is of type ValueHolderInterface, you must use ValueHolder indirection for the mapping.

551: Mapping uses ValueHolder Indirection, but its associated attribute is not a ValueHolderInterface.; Cause: You selected indirection without a ValueHolderInterface.; Action: If you select the Use Indirection (ValueHolder) option for a one-to-many, many-to-many, or direct collection mapping, the associated class attribute must be ValueHolderInterface.

560: The container class for this mapping must implement org.eclipse.persistence.indirection.IndirectContainer.; Cause: This mapping uses transparent indirection, but the Container class selected for its container policy is not an IndirectContainer.; Action: You must either select a Container class that is an IndirectContainer, or remove transparent indirection from the mapping.

570: The chosen reference descriptor is not an aggregate descriptor.; Cause: This is an aggregate mapping, but the selected reference descriptor is not an aggregate descriptor.; Action: You must either select a reference descriptor for this mapping that is an aggregate descriptor, or change this mapping to no longer be an aggregate mapping.

571: Aggregate fields are not specified.; Cause: You created an aggregate mapping without specifying specific fields.; Action: Every Field Description on the Fields tab must contain a unique Field for aggregate mappings.

572: Aggregate mapping fields must be unique.; Cause: You created an aggregate mapping without specifying unique fields.; Action: Every Field Description on the Fields tab must contain a unique Field for aggregate mappings.

573: The selected field does not exist on this descriptor's associated tables.; Cause: The field selected for one of the aggregate-path-to-fields for this aggregate mapping does not exist on any of the descriptor's associated tables.; Action: You must either select a different field for the path-to-field, or add the field to the appropriate table.

580: No XML field specified.; Cause: You mapped an attribute in an XML or EIS descriptor, but did not select an XML field.; Action: You must complete the XML Field field on the General tab of the mapping.

581: The specified XPath is not valid within the current schema.; Cause: The XPath specified for this mapping does not resolve in the schema.; Action: You must either select a different XPath, or alter the schema so that this XPath will resolve.

582: The specified XPath does not represent text data.; Cause: The XPath specified for this direct mapping does not resolve to a direct field in the schema.; Action: You must either select a different XPath, alter the schema so that this XPath will resolve to a direct field, or change the mapping type.

583: The specified XPath does not represent a single xml field.; Cause: The XPath specified for this mapping resolves to a field which is a collection, but this is not a collection mapping.; Action: You must either select a different XPath, alter the schema so that this XPath will resolve to a singular field, or change the mapping type.

590: The chosen reference descriptor is not a root eis descriptor.; Cause: The reference descriptor selected for this EIS reference mapping is not a root descriptor. Reference mappings in EIS descriptors must be root descriptors.; Action: You must either select a different reference descriptor for this mapping which is a root descriptor, or change the mapping type.

591: No relationship partner is specified.; Cause: This mapping has Maintains Bidirectional Relationship selected, but no relationship partner is specified.; Action: You must either deselect Maintains Bidirectional Relationship, or select a relationship partner.

592: The relationship partner must be an EIS One-to-One or EIS One-to-Many mapping.; Cause: The relationship partner selected for this mapping is not of the type EIS one-to-one or EIS one-to-many.; Action: You must select an EIS one-to-one or EIS one-to-many mapping as the relationship partner for this mapping, or deselect Maintains Bidirectional Relationship.

593: The specified relationship partner mapping does not specify this mapping as its own relationship partner.; Cause: The mapping selected as the relationship partner for this mapping does not have this mapping selected as its relationship partner. For these relationships to be bidirectional, you must select the relationship partner for both mappings.; Action: You must either go to the mapping selected as the relationship partner for this mapping and select this mapping as its relationship partner, or select a different relationship partner mapping for this mapping to maintain this mapping as its relationship partner.

594: There is a missing source XML field.; Cause: No field has been specified as the source XML field for this mapping.; Action: You must specify a source XML field.

595: There is a missing target XML field.; Cause: No field has been specified as the target XML field for this mapping.; Action: You must specify a target XML field.

600: A foreign key grouping element is required if there are multiple field pairs.; Cause: No foreign key grouping element is specified for this mapping and multiple field pairs.; Action: You must specify a foreign key grouping element.

601: The foreign key grouping element does not contain all foreign keys fields.; Cause: The specified foreign key grouping element does not contain all the foreign key fields.; Action: You must either remove the foreign key fields not contained in this foreign key grouping element, or pick a foreign key grouping element that contains all the foreign key fields.

602: A delete all interaction is specified, but the mapping is not private owned.; Cause: A deleteall interaction is specified for this mapping, but the mapping is not private owned.; Action: You must either make the mapping private owned, or remove the deleteall interaction.

610: At least one field pair must be specified, unless the mapping has no selection interaction and is read-only.; Cause: No field pairs are specified, and this mapping has a selection interaction specified and/or is not read-only.; Action: You must either specify a field pair for the mapping, or make the mapping read-only and remove the selection interaction.

XML Schema Errors (700 – 706)

This section lists EclipseLink Workbench XML schema errors.

701: A database table can only have one IDENTITY column defined.; Cause: You defined more than one identity column for this table.; Action: On the database table's Columns tab, leave only one identity (Identity) column. See Working with Column Properties.

702: A size is required for the column [column].; Cause: You did not specify any size for this column. The default size is 0.; Action: On the database table's Columns tab, specify the size (Size) for the column (field). See Working with Column Properties.

703: The reference [table reference] does not have any field pairs.; Cause: You added a reference for a table, but the reference does not include a key pair.; Action: On the database table's References tab, specify source and target field pairs for the table reference. See Creating Table References.

704: A key pair has not been completely specified for a reference.; Cause: A reference table is missing a complete key pair (source and target fields).; Action: You must specify a foreign key reference for the database table. On the database table's References tab, add a complete key pair. Creating Table References.

705: A development login has not been specified.; Cause: You created a relational EclipseLink Workbench project, but did not specify a development login.; Action: On the Database property sheet, select a Development Login from the available defined logins, or add a new login. See Configuring Development and Deployment Logins.

706: A deployment login has not been specified.; Cause: You created a relational EclipseLink Workbench project, but did not specify a deployment login.; Action: On the Database property sheet, select a Deployment Login from the available defined logins, or add a new login. See Configuring Development and Deployment Logins.

Session Errors (800 – 812)

This section lists the EclipseLink Workbench sessions XML errors.

801: [session name] Login - The connection URL has to be specified.; Cause: You have not specified a connection URL for the session (when using a database driver manager). Each session must have at least one login connection.; Action: On the session's Login – Connection tab, complete the Driver URL field. See Configuring a Session Login.

802: [session name] Login - The driver class has to be specified.; Cause: You have not specified a driver class for the session (when using a data source database driver).; Action: On the session's Login – Connection tab, complete the Driver Class field. See Configuring a Session Login.

803: [session or connection pool name]Login - Login - The data source name has to be specified.; Cause: You have not specified a driver class for the session login (when using a Java EE data source database driver).; Action: On the session's or connection pool's Login – Connection tab, complete the Data Source field. See Configuring a Session Login.

804: Login - Session Broker - It has to have at least one session, either a server or a database session.; Cause: You created a session broker but did not add any sessions. Each session broker must contain a session.; Action: On the session broker's General – Sessions tab, select a session to add to this broker. See Configuring Session Broker and Client Sessions.

805: [session name] Database Session - It has to have at least one XML file or a class specified.; Cause: Your database session does not have a primary project (an associated deployment XML file or Java class file).; Action: On the session's Project – General tab, complete the Primary Project field. See Configuring a Primary Mapping Project.

806: Login - The transport class has to be specified.; Cause: You selected a custom (user-defined) cache coordination type, but did not specify the transport class for cache coordination.; Action: On the session's Cache Coordination tab, complete the Transport Class field, or select a different cache coordination type. See Configuring a Coordinated Cache.

807: [session name] Login - The location of the log file has to be specified.; Cause: You are using standard logging and selected to have the log saved to a file, but did not select a file name and location.; Action: On the session's Logging tab, complete the Log Location field. See Configuring Logging.

811: [session or broker name] - An external transaction controller (JTA) has to be specified.; Cause: You selected a custom server platform, but did not specify the JTA for the platform.; Action: On the session or session broker's General – Server Platform tab, complete the External Transaction Controller (JTA) field. See Configuring the Server Platform.

812: [session or broker name] - A server class has to be specified.; Cause: You selected a custom server platform, but did not specify the server class for the platform.; Action: On the session or session broker's General – Server Platform tab, complete the Server Class field. See Configuring the Server Platform.

Common Classpath Problems

The following are some common EclipseLink Workbench error messages that may result from invalid classpath information. See Configuring Project Classpath for more information.

The EclipseLink Workbench does not display the class(es) to import.: Cause: Your classes are not available for import on the Select Classes dialog box.; Action: Ensure that the class is in your project's classpath (on the project's General properties tab). Ensure that the class is in the .zip or .jar file. You cannot import compressed classes.

The EclipseLink Workbench generates an exception error when importing classes.: Cause: EclipseLink class import utility did not start correctly. One of the classes includes a static initialization method, which may cause the import utility to fail.; Action: Ensure that your project's classpath points to the root directory of your package hierarchy. For example, to import the com.company.class package in the C:\classes\com\company directory, your project classpath should be C:\classes\.

The EclipseLink Workbench fails to import the class, but does not generate an exception error.: Cause: The classpath containing your JDBC drivers should still be on your system CLASSPATH. EclipseLink Workbench classpath is for domain classes only.; Action: Ensure that you have properly indicated the directories that contain your domain class(es) to map on the project's General tab.

Database Connection Problems

This section describes common errors and problems you may encounter when communicating with or logging in to the database.

The class [class] was not found.: Cause: You attempted to log in to the database, but EclipseLink could not find the JDBC driver for the database.; Action: Ensure that the JDBC_CLASSPATH in the setenv.cmd file points to your JDBC driver JAR files. Verify that your PATH includes all files (for example, native .dll files) required by the driver. If the path to your JDBC driver JAR files contains spaces, then the path must be enclosed in double-quotes in the setenv.cmd file. For example:

set JDBC_CLASSPATH="C:\Program Files\some directory\driver.jar\"

For more information, see Configuring the EclipseLink Workbench Environment.

Username or password could be invalid.: Cause: EclipseLink was unable to log in to the database.; Action: Ensure that the Username and Password for the database are correct.Verify with your DBA that the database is set up and operating correctly.

You must define a development login.: Cause: You attempted to log in to the database from EclipseLink Workbench, but you did not define a development login.; Action: On the database property sheet, select a Development Login, or create a new Defined Login. See Configuring Login Information at the Project Level.

No database driver has been specified.: Cause: You attempted to log in to the database from EclipseLink Workbench, but you did not complete the login information.; Action: Complete all the required fields on the database property sheet for the selected development login. See Configuring Login Information at the Project Level.

Invalid URL specified.: Cause: You attempted to log in to the database from EclipseLink Workbench, but the URL is incorrect.; Action: Complete the URL field on the database property sheet for the selected development login. See Configuring Login Information at the Project Level.

Copyright Statement

Notice: This Wiki is now read only and edits are no longer possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

EclipseLink Workbench Error Reference (ELUG)

Contents

Miscellaneous Errors (1 – 89, 106 – 133)

Project Errors (100 – 102)

Descriptor Errors (200 – 399)

Mapping Errors (400 – 483)

Table Errors (500 – 610)

XML Schema Errors (700 – 706)

Session Errors (800 – 812)

Common Classpath Problems

Database Connection Problems

Breadcrumbs

Notice: This Wiki is now read only and edits are no longer possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

EclipseLink Workbench Error Reference (ELUG)

Contents

Miscellaneous Errors (1 – 89, 106 – 133)

Project Errors (100 – 102)

Descriptor Errors (200 – 399)

Mapping Errors (400 – 483)

Table Errors (500 – 610)

XML Schema Errors (700 – 706)

Session Errors (800 – 812)

Common Classpath Problems

Database Connection Problems