Skip to main content
Jump to: navigation, search

Tutorial: Building your first OSGi Remote Service

Revision as of 12:18, 27 December 2014 by (Talk | contribs)


OSGi Services is a very simple model to expose arbitrary services within a single runtime. Now, however, there is a specification for OSGi Remote Services (Chapter 100 in the Enterprise specification). OSGi Remote Services are exported for remote access, typically allowing multiple clients to access the remote service.

The OSGi Remote Services specification is unique in being completely transport and protocol independent. This allows those that define and consume services to do so in a standard way, without committing to a particular implementation of the mechanism of distribution.

This tutorial will guide the reader through

  1. Defining and implementing an OSGi remote service
  2. Exposing that service for remote access via OSGi Remote Services standard, using the implementation provided by the Eclipse Communication Project (ECF)

Common to Host and Consumer: Define the Service

The key to building a system with low coupling and high cohesion is to create clear and coherent boundaries between different parts of your system. Central to this is defining simple, clear interfaces between allow the subsystems to interact as needed, but only in clearly defined ways.

For example, here's a simple time service:

package com.mycorp.examples.timeservice;
public interface ITimeService {
	public Long getCurrentTime();

The purpose of this service is simply to provide the current the form of a long value specifying the number of milliseconds since 1970 returned from a call to getCurrentTime(). Of course, declarations of much more complex services are possible, with multiple methods, multiple arguments for each method, and complex types as arguments and return values. In short, any java interface can be used as the service interface. OSGi also allows the use of multiple interfaces exposed by a single implementation.

With OSGi services it's a best practice to put the service interface (and any class referred to by the service interface) in a distinct bundle. This creates a clear, modular, framework-enforced separation between the service API, the service implementation, and any code that uses the service. This minimizes the coupling between subsystems. For Remote Services such separation and low-coupling is particularly important, since the host implementation is in a separate process from the service client/consumers...making it highly desirable to minimize the coupling and clarify the interface between systems.

Here is a complete source for the bundle with the ITimeService interface class. The package containing this class is exported via the manifest so that the Host and Consumer bundles (below) can refer to the service interface in their own code.

Export-Package: com.mycorp.examples.timeservice;version="1.0.0"

Note also the version information associated with the package...OSGi Remote Services supports versioning of service interfaces. Being able to version service interfaces, and have the underlying framework automatically restrict the service binding to compatible versions is a very useful feature for enhancing and maintaining APIs over time.

Service Host: Implement the Service

Next, it's necessary to create a service 'host' implementing the ITimeService interface.

import com.mycorp.examples.timeservice.ITimeService;
public class TimeServiceImpl implements ITimeService {
	public Long getCurrentTime() {
		System.out.println("TimeServiceImpl.  Received call to getCurrentTime()");
		return new Long(System.currentTimeMillis());

This implementation simply returns the local system's current time. To refer to the ITimeService service the host bundle manifest must import the com.mycorp.examples.timeservice package from the bundle defined above by adding a line like this to the host bundle manifest:

Import-Package: com.mycorp.examples.timeservice;version="1.0.0"

Service Host: Register the Service

In the OSGi Service model it's necessary to register the service with the OSGi service registry. There are multiple ways of registering a service...programmatically java code, declaratively via Declarative Services (DS). For introductions about various approaches to register an OSGi Service see Vogella's OSGi Services Tutorial. For this tutorial we will register our TimeServiceImpl via a single line of java code:

bundleContext.registerService(ITimeService.class, new TimeServiceImpl(),props);

With a local OSGi Service the above line of java is all that's necessary to register the service. For a Remote Service, only a little more is required to trigger the distribution provider to export the service:

Dictionary<String, String> props = new Hashtable<String, String>();
// OSGi Standard Property - indicates which of the interfaces of the service will be exported.  '*' means 'all'.
props.put("service.exported.interfaces", "*");
// OSGi Standard Property (optional) - indicates which provider config(s) will be used to export the service
// (If not explicitly given here, the provider is free to choose a default configuration for the service)
// Register a new TimeServiceImpl with the above props
bundleContext.registerService(ITimeService.class, new TimeServiceImpl(), props);

With the ECF RS implementation present in the host runtime, adding these service properties will result in the following occurring before the registerService call returns:

  1. The TimeServiceImpl will be exported via the distribution provider identified via config..i.e. "ecf.generic.server"
  2. The exported service will be published for discovery, using any installed and available network discovery providers

The full source for the host bundle, with the host implementation and registration code can be found in the project.

Note that there are no references to additional OSGi classes...or ECF classes...but rather only classes exposed by the service interface (in this case ITimeService). For all of the remoting information, standardized service properties are used to qualify the ITimeService API as a remote service, and to select and configure a remote services provider. This provides a great deal of flexibility to the ITimeService implementer, and allows the dynamic selection and use of a variety of distribution providers...from ECF or not...and multiple configurations.

Consumer: Discover and Use the Service

For consumers to use a remote service they must first discover the service. With OSGi Remote Services this discovery can be accomplished several ways. The easiest and most automatic is to use a network discovery protocol, such that when the remote service is exported by a host and published via a network discovery protocol (as described above), a consumer can then automatically discover the remote service over the network.

For this tutorial, we'll assume that one ECF's supported LAN-based network discovery providers is present, meaning that if the remote service host and consumer are on the same LAN, the consumer will automatically discover the remote service via the network discovery protocol (e.g. Zeroconf). With network discovery, the consumer can use OSGi Declarative Services to automatically bind/inject the service into client code:

package com.mycorp.examples.timeservice.consumer.ds;
import com.mycorp.examples.timeservice.ITimeService;
public class TimeServiceComponent {
	void bindTimeService(ITimeService timeService) {
		System.out.println("Discovered ITimeService via DS");
		// Call the service and print out result!
		System.out.println("Current time is: " + timeService.getCurrentTime());  // Call the ITimeService remote service

OSGi Declarative Services will automatically inject the ITimeService proxy by calling the bindTimeService method when the remote service is discovered. With the code above, the ITimeService.getCurrentTime() method will be called only when the binding occurs.

As with the host, to refer to the ITimeService the consumer must also import the com.mycorp.examples.timeservice package by importing the package via it's manifest:

Import-Package: com.mycorp.examples.timeservice;version="1.0.0"

The only other requirement for the consumer is to have standard DS markup so that DS can know to call bindTimeService when the ITimeService proxy is registered by the consumer's distribution provider. The required DS markup is available in this xml file.

The complete project for this consumer (TimeServiceComponent class, DS markup, and is available here.

With the three bundles defined...i.e.

  1. the service interface bundle
  2. the host bundle
  3. the consumer bundle

along with the ECF remote service implementation, we may now run the ITimeService host implementation. The consumer can then be discovery, inject, and to use the ITimeService.

Starting the Host

The TimeService Host may now be started in either Apache Karaf or within Eclipse.

Starting the Host in Apache Karaf

To run the TimeService host in Apache Karaf you must first install the TimeService Tutorial bundles.

Optionally, before starting the TimeService host you can turn on some extra output by issuing this command into the Apache command shell

karaf@root()> system:property verboseRemoteServiceAdmin true

Then using the webconsole (or the command shell) start the bundle

ECF RS Example Timeservice Host (

This will produce output in the command shell (System.out) similar to the following, indicating that the service has been exported by RemoteServiceAdmin and the MyTimeService registered.

karaf@root()> Service Exported by RemoteServiceAdmin.  EndpointDescription Properties=...
...debug output from verboseRemoteServiceAdmin...
MyTimeService host registered with registration=org.apache.felix.framework.ServiceRegistrationImpl@7a627ff2

For reference, this output is produced by the TimeService Examples Host activator class

The output above indicates that the TimeService has been exported and is ready for remote consumer access.

Starting the Host in Eclipse

In the project, in the launch directory is a launch config named TimeServiceHost.launch. In Eclipse, you can launch the host by right-clicking on this launch config and choosing Run As -> TimeServiceHost. In the console output, you should see something like this

osgi> MyTimeService host registered with registration={com.mycorp.examples.timeservice.ITimeService}=...
Service Exported by RemoteServiceAdmin.  EndpointDescription Properties=...

This indicates that the service was registered and exported by ECF's remote service implementation.

Starting the Consumer to Execute the Remote Service

In the com.mycorp.examples.timeservice.consumer.ds project, in the launch directory is a launch config named TimeServiceConsumer DS.launch. In Eclipse, you may launch the consumer by right-clicking on this launch config and choosing Run As -> TimeServiceConsumer DS. In the console output, you should immediately see:


But then after a few seconds (for the network discovery protocol to operate) the service will be discovered, the proxy created via the ECF distribution provider, and the proxy injected into the TimeServiceComponent via the call to bindTimeService, resulting in console output:

osgi> Discovered ITimeService via DS
Current time is: 1386354647672

As well as host console output resulting from the call to TimeServiceImpl.getCurrentTime():

TimeServiceImpl.  Received call to getCurrentTime()

This constitutes a successful test of the remote time service.

Background and Related Articles

Getting Started with ECF's OSGi Remote Services Implementation

OSGi Remote Services and ECF

Asynchronous Proxies for Remote Services

Static File-based Discovery of Remote Service Endpoints

Download ECF Remote Services/RSA Implementation

How to Add Remote Services/RSA to Your Target Platform

Copyright © Eclipse Foundation, Inc. All Rights Reserved.