Skip to main content

Notice: this Wiki will be going read only early in 2024 and edits will no longer be possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

Jump to: navigation, search

Difference between revisions of "Triquetrum/Kepler"

(Copied over DDFDirectory, actor.hoc and Kepler DocumentationAttribute.)
(Added Category.)
 
(12 intermediate revisions by one other user not shown)
Line 14: Line 14:
 
The biggest issue with the integration is that Kepler's classes are not set up for OSGi.  [[Triquetrum/Extending Triquetrum]] discusses how to set up the packages.
 
The biggest issue with the integration is that Kepler's classes are not set up for OSGi.  [[Triquetrum/Extending Triquetrum]] discusses how to set up the packages.
  
=== Kepler Installation ===
+
== Status ==
 +
As of June 7, 2016, porting the Kepler ExecutionChoice actor to Triquetrum is partially complete.  The ExecutionChoice actor was chosen because it is an arbitrarily complex actor that would not be an easy port. The primary issue is that the ExecutionChoice code uses the Swing-based BasicGraphFrame code that is not present in Triquetrum.  The next step would be to get the ptolemy.actor.lib.hoc.Case actor working in Triquetrum because the Case actor has internal models that need to be viewable.  Right now, the UI uses ptolemy.vergil.modal.CaseGraphFrame and CaseGraphTableau, which use BasicGraphFrame, which is not present in Triquetrum because Triquetrum does not use the Swing-based viewer. After that, the next step would be to refactor ExecutionChoice to follow the Case example where the UI is in ptolemy.vergil.modal.CaseGraphFrame and CaseGraphTableau.
 +
 
 +
The current work is in checked in to a repository, see [[Triquetrum/Kepler Triquetrum Repository]].
 +
 
 +
== Kepler Installation ==
 
# See [https://kepler-project.org/developers/reference/kepler-and-eclipse Kepler and Eclipse] for how to download and configure Kepler.  To get the DDP work, we use the biokepler configuration, so:
 
# See [https://kepler-project.org/developers/reference/kepler-and-eclipse Kepler and Eclipse] for how to download and configure Kepler.  To get the DDP work, we use the biokepler configuration, so:
 
   mkdir kepler
 
   mkdir kepler
Line 28: Line 33:
 
* main class: org.kepler.Kepler
 
* main class: org.kepler.Kepler
  
==== Kepler Fails to start: ProvKAREntryHandler$Factory ====
+
=== Kepler Fails to start: ProvKAREntryHandler$Factory ===
 
If, during startup, we get this message:
 
If, during startup, we get this message:
  
Line 51: Line 56:
  
 
Our first goal is to get Kepler running and count words using Unix commands.
 
Our first goal is to get Kepler running and count words using Unix commands.
 
== Creating a new Kepler Bundle ==
 
See [[Triquetrum/Extending_Triquetrum#Creating_an_actor_bundle | Creating an actor bundle]].
 
 
# Create the plug-in,
 
## In Eclipse: File -> New Plug-in Project
 
## In the dialog, set the Project Name: to org.kepler.triquetrum.ddp
 
## Click Next, then Finish
 
# In the org.kepler.triquetrum.ddpDemo package, update MANIFEST.MF:
 
<pre>
 
Require-Bundle: org.eclipse.ui,
 
org.eclipse.core.runtime,
 
ptolemy.gui,
 
ptolemy.core,
 
ptolemy.moml
 
</pre>
 
and
 
<pre>
 
Import-Package: org.apache.commons.lang;version="2.6.0",
 
  org.osgi.framework;version="1.8.0",
 
  org.ptolemy.classloading;version="11.0.0",
 
  org.ptolemy.classloading.osgi;version="11.0.0",
 
  org.ptolemy.commons;version="11.0.0",
 
  ptolemy.actor;version="11.0.0",
 
  ptolemy.actor.gui;version="11.0.0",
 
  ptolemy.data;version="11.0.0",
 
  ptolemy.data.expr;version="11.0.0",
 
  ptolemy.data.type;version="11.0.0",
 
  ptolemy.gui;version="11.0.0",
 
  ptolemy.kernel;version="11.0.0",
 
  ptolemy.kernel.util;version="11.0.0",
 
  ptolemy.moml;version="11.0.0",
 
  ptolemy.util;version="11.0.0"
 
Export-Package: org.kepler;version="1.0.0"
 
</pre>
 
'''FIXME''': The Import-Package settings are probably not necessary.
 
 
# Create the p2.inf file (See [[Triquetrum/Extending_Triquetrum#Creating_an_actor_bundle | Creating an actor bundle]])
 
## Open the org.eclipse.triquetrum.workflow.actor.plot project, click on META-INF, highlight the p2.inf file and select copy
 
## In the org.kepler.triquetrum.ddp project click on META-INF and paste
 
## The p2.inf file will be created.
 
 
== Create ExecutionChoice.java ==
 
# In the org.kepler.triquetrum.ddp project, right click on the src icon and click New -> Class
 
# Change the package to org.kepler.ddp.actor
 
# We will update the enclosing type later
 
# Use File -> Open to open the kepler/ddp-common/src/org/kepler/ddp/actor/ExecutionChoice.java file, copy and paste it in to the newly created file
 
# There will be lots of errors.
 
 
== Fix the compilation errors in ExecutionChoice.java ==
 
Below are the steps taken to fix the compilation errors in ExecutionChoice.java
 
 
=== The import org.apache.commons.io.FileUtils cannot be found ===
 
The error:
 
 
import org.apache.commons.io.FilenameUtils;
 
 
Solution: Add the following to org.kepler.triquetrum.ddp MANIFEST.MF under Require-Bundle:
 
 
org.apache.commons.io,
 
 
=== Various Kepler classes are missing ===
 
In ExecutionChoice, these imports are failing:
 
 
  import org.kepler.build.modules.Module;
 
  import org.kepler.build.modules.ModuleTree;
 
  import org.kepler.ddp.gui.ExecutionChoiceEditorFactory;
 
  import org.kepler.ddp.gui.ExecutionChoiceEditorPane;
 
  import org.kepler.provenance.ProvenanceRecorder;
 
  import org.kepler.reporting.ReportingListener
 
 
The solution is to copy them over.  An alternative would be to use the Eclipse projects for these Kepler projects.
 
 
<pre>
 
(cd ~/src/kepler/build-area/src; \
 
tar -cf - org/kepler/build/modules/{Module,ModuleTree}.java) \
 
| (cd ~/src/workspaceTriq03JunB/org.kepler.triquetrum.ddp/src/; tar -xvf -)
 
 
(cd ~/src/kepler/ddp-common/src; \
 
tar -cf - org/kepler/ddp/gui/ExecutionChoiceEditor{Factory,Pane}.java) \
 
| (cd ~/src/workspaceTriq03JunB/org.kepler.triquetrum.ddp/src/; tar -xvf -)
 
 
(cd ~/src/kepler/provenance/src; \
 
tar -cf - org/kepler/provenance/ProvenanceRecorder.java) \
 
| (cd ~/src/workspaceTriq03JunB/org.kepler.triquetrum.ddp/src/; tar -xvf -)
 
 
(cd ~/src/kepler/reporting/src; \
 
tar -cf - org/kepler/reporting/ReportingListener.java) \
 
| (cd ~/src/workspaceTriq03JunB/org.kepler.triquetrum.ddp/src/; tar -xvf -)
 
</pre>
 
 
=== Various Ptolemy Classes are Missing ===
 
DDFDirector, various actor.hoc and KeplerDocumentationAttribute classes are missing, so we copy them over.
 
 
'''FIXME''': These should be added as a bundle to Triquetrum.
 
<pre>
 
(cd $PTII; \
 
  tar -cf - ptolemy/domains/ddf/kernel/{DDFDirector,ActorEnablingStatus}.java \
 
  ptolemy/actor/util/DFUtilities.java \
 
  ptolemy/actor/lib/hoc/{Case,CaseDirector,MultiCompositeActor,MultiCompositePort,Refinement,RefinementPort}.java \
 
  ptolemy/actor/util/Time.java ptolemy/math/ExtendedMath.java
 
  ptolemy/vergil/basic/{DocAttribute,KeplerDocumentationAttribute}.java) \
 
  | (cd ~/src/workspaceTriq03JunB/org.kepler.triquetrum.ddp-common/src/; tar -xvf -)
 
</pre>
 
 
  
 
== Resources ==
 
== Resources ==
* [[Triquetrum/Kepler Tree Shaking]]
+
* [[Triquetrum/Kepler Triquetrum Repository]] - The current effort to use Kepler actors in Triquetrum. (Start here)
 +
* [[Triquetrum/Kepler Feature]] - How the [[Triquetrum/Kepler Triquetrum Repository]] was created
 +
* [[Triquetrum/Kepler Tree Shaking]] - a first attempt at including all of the classes that were used by Kepler at run time.
 
* [https://github.com/eclipse/triquetrum/issues/84 Bug 84: Test out integrating Kepler code into Triquetrum: Use DDP/Hadoop as driver.]
 
* [https://github.com/eclipse/triquetrum/issues/84 Bug 84: Test out integrating Kepler code into Triquetrum: Use DDP/Hadoop as driver.]
 
* [[Triquetrum/Extending Triquetrum]]
 
* [[Triquetrum/Extending Triquetrum]]
 +
 +
[[Category:Triquetrum]]

Latest revision as of 10:23, 8 June 2016

This page is a work in progress.

The goal of this page is to illustrate how to use Kepler Scientific Workflow System Actors in Triquetrum.

Note that the Kepler Scientific Workflow System is not the same as the Kepler release of Eclipse. In this page, the term Kepler is used to mean the Kepler Scientific Workflow System.

Kepler

The Kepler Scientific Workflow System has actors that we would like to use in Triquetrum. In this case, we would like to use Kepler's Distributed Data-Parallel (DDP) actors.

For a brief overview of DDP, see:

The biggest issue with the integration is that Kepler's classes are not set up for OSGi. Triquetrum/Extending Triquetrum discusses how to set up the packages.

Status

As of June 7, 2016, porting the Kepler ExecutionChoice actor to Triquetrum is partially complete. The ExecutionChoice actor was chosen because it is an arbitrarily complex actor that would not be an easy port. The primary issue is that the ExecutionChoice code uses the Swing-based BasicGraphFrame code that is not present in Triquetrum. The next step would be to get the ptolemy.actor.lib.hoc.Case actor working in Triquetrum because the Case actor has internal models that need to be viewable. Right now, the UI uses ptolemy.vergil.modal.CaseGraphFrame and CaseGraphTableau, which use BasicGraphFrame, which is not present in Triquetrum because Triquetrum does not use the Swing-based viewer. After that, the next step would be to refactor ExecutionChoice to follow the Case example where the UI is in ptolemy.vergil.modal.CaseGraphFrame and CaseGraphTableau.

The current work is in checked in to a repository, see Triquetrum/Kepler Triquetrum Repository.

Kepler Installation

  1. See Kepler and Eclipse for how to download and configure Kepler. To get the DDP work, we use the biokepler configuration, so:
  mkdir kepler
  cd kepler
  svn co https://code.kepler-project.org/code/kepler/trunk/modules/build-area
  cd build-area/
  ant change-to -Dsuite=biokepler  
  ant clean-cache
  ant eclipse
  1. Import the Kepler projects into a new workspace that is not the same as where Triquetrum is set up
  2. Create a Kepler Run configuration an run it:
  • project: biokepler
  • main class: org.kepler.Kepler

Kepler Fails to start: ProvKAREntryHandler$Factory

If, during startup, we get this message:

java.lang.ClassNotFoundException: org.kepler.kar.handlers.ProvKAREntryHandler$Factory
  at java.net.URLClassLoader.findClass(URLClassLoader.java:381)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:424)

The solution is to select use the biokepler project, not the kepler project.

Run the DDP demo

Kepler will start up. Close the splash window and under Components, double click on DDP and then wordcount-execution-choice.xml. Below is a screen shot of the initial Kepler window:

KeplerMainDDPWordCount.png

The wordcount demo has multiple ways of counting words. The default way is to use Unix commands.

Below is a run that counts words using Unix commands:

KeplerWorkflowSystemLocalExecution.png

To use the other ways of counting words, double click on the Word Count actor and change the Choice parameter.

Our first goal is to get Kepler running and count words using Unix commands.

Resources

Back to the top