STEM Loggers

About STEM Loggers

<insert some boilerplate welcome text>

Creating a Logger

Creating a STEM Logger is similar to creating STEM Models, Scenarios, Decorators, etc. A wizard is provided to guide you through the steps.

1. Before you begin, launch STEM, switch to the Design perspective and make sure you have at least one STEM Project in the Project Explorer .
2. Launch the New Logger Wizard by clicking the "Create a new logger" button

   <logger wizard button>

   <new logger wizard>

3. In the New Logger Wizard, select a Project from the dropdown menu and enter a Name

   Note: The new logger's configuration will be stored in <PROJECT>/Loggers/<NAME>.logger.

4. Select a Logger Type from the dropdown menu

   Options include:

   • CSV File Logger
   • Map View Logger
   • Several project map loggers, including:
     • Equirectangular Map Logger
     • Mercator Map Logger
     • Orthographic Map Logger
     • Azimuthal Equidistant Map Logger
5. Configure the logger by entering logger type-specific settings

   Note: See the section below for help configuring each logger type

6. When you're finished, click Next or Finished if you do not need to change the Logger Dublin Core metadata

Temp Images