Skip to main content

Notice: this Wiki will be going read only early in 2024 and edits will no longer be possible. Please see: for the plan.

Jump to: navigation, search

Orbit/Adding Bundles to Orbit

< Orbit
Revision as of 11:21, 18 April 2018 by (Talk | contribs) (Added information for new recipes (i.e. without existing folder/category))

Before You Do Anything

Project Approvals and the CQ Process

Don't waste your time working up an OSGi bundling of a third-party library (or at least setting up a CVS project for a 3rd-party OSGi bundle) before you know that you will be able to use it. So, first start the legal approval process with the Eclipse Foundation's legal department by

  1. Raising a Contribution Questionnaire (CQ) requesting use of the 3rd-party code in your project (note: this is not the Orbit project, but the project in which you want to use the code). Do this in the MyFoundation portal. Raise one CQ for each JAR in the original 3rd-party software distribution that you intend to use.
  2. Getting your project's PMC to grant their approval to use the 3rd-party library in their project. This ensures that you should even be attempting an Orbit contribution, and that some Eclipse project actually intends to re-use the code that will be contributed to Orbit. In fact, it's probably a good idea to solicit informal approval of your intention from your PMC before initiating the CQ process at all.
  3. If your project is eligible for the Parallel IP Process, then you may as well begin working on your bundle.
  4. When the Eclipse foundation has approved your 3rd party library for use in your project, raising a "piggy-back" (PB) CQ for the Orbit project to re-use the library. In the MyFoundation portal, [view] the tools.orbit project and click [add] an approved third-party library to Orbit. Orbit, like any other project, requires permission from the Eclipse Foundation to include any 3rd-party code in its repository and builds.

This is not a definitive guide to the legal process for 3rd-party content. For that, see the wealth of information in the Development Resources.


The Orbit Bundle Checklist provides a concise checklist of the following steps.

Setting up GIT for the new bundle

Creating a new project for an Orbit bundle

When adding an entirely new library to Orbit, you have to create a module in GIT to house the content. Follow these steps to set this up the first time.

  1. First decide on the desired name (see Bundle Naming) and make sure to know the groupId, artifactId, and version for the maven artifact that will serve as a base for the bundle. For this example we'll use
  2. Make sure you have the orbit-recipes project cloned
$ git clone ssh://
  1. You need to install the eclipse ebr maven plugin in your machine (see [1])
  2. Choose a folder in orbit-recipes git repository under which to create the recipe and then create it there using (you might need to use the complete ebr name as discussed in the ebr README)
$ mvn ebr:create-recipe -DgroupId=com.example -DartifactId=foo -Dversion=1.0.0
  1. If you are starting a new recipe, you need to add a parent pom to the new recipe folder and a module (or modules) with its respective pom for the recipes that will be group under the new recipe. Use the existing recipes as guidance.

Library not available on Maven Central

The new orbit build process, which makes use of CBI automates a large amount of the work required to create a bundle from a regular jar library. However, it depends heavily on the library being available from a maven repository. The advantage to this approach is it takes away the burden of uploading the library onto the committers while also opening up the possibility of having contributors propose changes. Many libraries meet this requirement and can be found on Maven Central, but for those that are not there, or cannot be deployed there is an alternative.

Much like the old process of manually uploading the jar (exploded) into CVS, the Orbit project provides a more convenient way to upload the library as well as its sources to our own (Nexus) maven repository where approved artifacts can be hosted. This is provided through a JIPP (Jenkins Instance Per-Project) at . Committers would merely trigger a build by providing the library, its sources, the GAV (groupId, artifactId, version) that will identify it, and the build would deploy the artifact(s).

Adding a library for the first time

The page titled, Adding Bundles To Orbit In 5 Minutes contains all the necessary information for adding a library to Orbit for the first time. The process is most straightforward when the library exists on Maven Central repository.

Moving an existing bundle to Orbit

Adding an existing bundle to Orbit is currently no too different from adding a library for the first time (See Adding Bundles To Orbit In 5 Minutes). The main difference is that with an existing bundle, certain OSGi metadata may need to be preserved while others may need to be reproduced to be as identical to the original metadata.

Adding source for Orbit bundles

This is done automatically by the orbit-recipes build process.

Project setup

No matter how you created your bundle in Orbit, the following outlines how the project itself should be configured. Remember, it is often simpler to use the Resource Navigator rather than the Project Explorer since you really need to see all the files in your project and you aren't really compiling or building anything.

  • In the MANIFEST.MF, ensure that the Bundle-Classpath: header is either missing or has only '.' as a value.
  • For most cases there is no need to have Eclipse-Autostart: true or such headers since this library is generic and will not have an OSGi bundle activator.
  • Similarly, for most bundles there is no need to set the singleton:=true on the Bundle-SymbolicName header.
  • Of course, you should set the Bundle-RequiredExecutionEnvironment header to the absolute minimum JRE required by the library. That can often be difficult to figure out. Look for some tools in PDE to help with this...
  • Where possible use Import-Package instead of Require-Bundle. This reduces sensitivity to different bundlings of the same library.
  • The Orbit community has agreed that Bundle-Version numbers should be the original library version number followed by .qualifier in the fourth segment. In the event that the original number is already four segments, that version number should be used and then followed by "_qualifier". Note that this versioning scheme differs from the normal Eclipse plug-in Version Numbering if the external library does not follow the Eclipse rules.
  • It is suggested that a 3 part version number be included in the project name, in the .project file. This is to enable those that use the Eclipse IDE preference to "Use .project project name instead of module name on check out". This makes it easier to check out multiple versions of a bundle (project) from its various branches. For example,

The osgi.bnd file

The osgi.bnd file is used to generate the MANIFEST.MF file for the bundle so it is very important the contents of this file are correct. This can be done by building the bundle locally to ensure the final manifest generated is correct. This file also has a set of predefined instructions (See The following is a list of items to consider when finalizing the osgi.bnd file.

Import-Package should have an optional catch-all

All Import-package statements within the osgi.bnd file should end in a '*;resolution:=optional' statement that serves as a fallback in the event that any packages are missed.

Import-Package: \*;version="${range;[===,=+);${package-version}}", \*;version="${range;[===,=+);${package-version}}", \

It has been argued that things could be made easier by simply having 'Import-Package: *' and have all dependencies be automated. However, contributors should be aware of every dependency that their package uses, so stating them explicitly should be required. This approach still allows grouping of various packages under a similar namespace using wild-card matches.

Emit No Import-Package

This can be done very simply by defining :

Import-Package: !*

Permit Require-Bundle

By default, the Require-Bundle header is removed from the final generated manifest by the ebr-maven-plugin, and usage of this header in Orbit manifests is discouraged. If there is a good reason for why it needs to be used one can permit its use by overriding the property in the bundle's corresponding pom.xml file :


Now, the 'Require-Bundle' header may be defined in the osgi.bnd file.

Bypass Errors

In some cases the ebr-maven-plugin may halt execution due to what it may perceive as a packaging error. If the issue is in fact a false positive, one can bypass it in the osgi.bnd file of the module causing the issue using the fixupmessages instruction. See for more information :

-fixupmessages "Classes found in the wrong directory"; is:=warning

The above instruction would ensure that any error/warning message "Classes found in the wrong directory", would be set as a warning. entries and .classpath file

This is not necessary as the process of creating the bundles is handled automatically.

A special note about the file:

For your binary bundle (not your source bundle), in most cases it will have an entry like:


This tells PDE that when someone has the project loaded into their workspace and other projects depend on it, then PDE should look at the project root for class files to compile against.

Note that it is important not to have a source..=. entry in your file as that will cause the bundle to be compiled and this can be a problem with the nested source bundles.

A special note about the .classpath file:

Be sure the class folders are listed in the project's build path properties and that they are marked exported. This only effects the .classpath file and effects how PDE and JDT "find" the classes if it happens to be checked out in a persons workspace while they are coding other plugins.

Special Detailed Notes on the four segment case

As documented above, in the event that the original package number is already four segments, that version number should be used and then followed by "_qualifier". These leads to a few differences in exactly how the final qualifier is computed and referred to in features and map files. The following example are taken from bug 152588.

For example, for the junit version, the file specifies


But, the feature.xml file specifies

   <plugin id="org.junit" version="4.1.0.qualifier" />

The resulting jar file is named as follows.


And, the resulting bundle version matches the file name, for example,


Avoid qualifiers that change with date and time of each build

Note: to avoid the "current date and time" substitution for qualifier version -- which would cause a version increment each build, even though contents not changed, use the exact same form in the feature.xml file. (See bug 355586.) For example, use in the feature.xml file, such as,

  <plugin id="org.apache.derby" version="" />

This will then cause the last time of modification to be substituted for 'qualifier', resulting in versions such as This may look different from usual, but will remain constant from build to build.

Special Detailed Notes on the RC case

Sometimes bundles need to be added that aren't full releases, but 'release candidates.' These release candidate plug-ins should share the same branch as their full release cousins.

For example, let's say we have a plug-in ch.ethz.iks.slp 1.0.0 RC2, the file specifies

   Bundle-Version: 1.0.0.RC2_qualifier

The branch the plug-in would be created in is v1_0_0 even though it's an RC2 release. Once 1.0.0 came out or say RC3, the branch would be updated with the info code. This essentially limits us to one "1.0.0" release at a time, but it's an acceptable workaround for the time being.

The feature.xml file specifies

       version="1.0.0.qualifier" />

And, the (multiversion) map file specifies


The resulting zip file is named as follows (zip, in this case, since it is not a jarred bundle).

And, the resulting bundle version matches the file name, for example,

    Bundle-Version: 1.0.0.RC2_200704231307

Note: It's incredibly important that the final release is lexicographically greater than the release candidate so it can be updated properly. For example, ch.ethz.iks.slp_1.0.0.RC2_v200801291200 is > than ch.ethz.iks.slp.1.0.0_v200801291200 because "R" is considered greater than "v"

Bundle Packaging Options

Embedded Jars

Certain bundles may require that class files be provided as embedded jars, and referenced under the Bundle-ClassPath attribute of the MANIFEST.MF, as opposed to exploded jars at the root of the class path.

To achieve this, simply define the property <recipe.unpackdependencies>false</recipe.unpackdependencies> in the bundle's module. One can further customize the naming of the embedded jars using <recipe.stripversion>true</recipe.stripversion> to further strip out the versioning from the listed jars.


Excluding Source Bundles

In cases where certain bundles must be distributed 'binary only', without corresponding source bundles, this can be achieved through the <excludes> configuration option of the tycho-source-feature-plugin in releng/mavenparent/pom.xml

Adding Bundles To A Maintenance Release

In some cases, it may be required to add bundles to maintenance releases (eg. Oxygen.2) while active development is taking towards a newer release (eg. Photon). This is simply a matter of cherry picking (through git) the necessary changes onto the corresponding maintenance branch.

  1. Locate the maintenance branch corresponding to the release. It should be named RX_Y , where X.Y would be the version of the Eclipse release.
  2. git cherry-pick ${COMMIT} (resolving any conflicts)
  3. GIT_COMMITTER_DATE="$(git show -s --format=%cd)" git commit --amend

The GIT_COMMITTER_DATE environment variable ensures that the commit date used for the cherry-picked commit matches that of the original commit on the development branch. This is necessary to ensure that the bundle built using the maintenance branch will be given the same qualifier (through tycho-packaging-plugin's jgit time stamp provider) as the original bundle in the event that there are no additional changes.

Packaging licensing information

When packaging a third party library we have to ensure that the licensing information is present and correctly used. Generally, the about_files, about.html,, and the ip_log.xml files will be automatically generated and correctly defined. They should still be checked to ensure the correct license has been detected and in the case of the ip_log.xml file, some additional fields will need to be filled in manually such as the corresponding ATO (Add To Orbit) CQ.

National Language Considerations

The following are some tips to help make sure any text in the bundle is not "garbled" during network or storage transfers and it is capable of being properly translated to languages other than English.

  • As I think is true for all projects in an Eclipse repository, it is recommend you set the project's default encoding preference to ISO-8859-1. This project encoding applies to files that do not otherwise have any ability to specify their encoding (such as ".txt" or ".java" files). This is a good "single byte" encoding in general, and I think the CVS Repository Server assumes ISO-8859-1 as the default. Having it set as a project setting is good, so that, for example, if someone on windows checks it out and makes changes, and someone on Linux checks it out and makes changes, the default encoding for that project will be the same, no matter what the default encoding are on those different OS platforms.
  • Be sure to "externalize" all the string in your files, and plugin.xml files, if you have any. There is usually at least two: the provider's name and the bundle's name.

What to use as Provider Name?

This is automatically generated by the orbit-recipes build but if for some reason this isn't being generated, Use "Eclipse Orbit".

This is for the Bundle-Vendor: header in files. This should be externalized so what's in the file is a key, usually something like

Bundle-Vendor: %Bundle-Vendor.0

and then in the, or file is there you would have

Bundle-Vendor.0 = Eclipse Orbit

Historically, it used to be required to use "". Beginning in Galileo, however, the recommendation (requirement, actually) is to use 'Eclipse' followed by the project name, avoiding acronyms and abbreviations etc, acknowledging that these are for end-users to read. The appropriate "project name" differs from one top level project to another. For example, in WTP, all sub-projects use the top level project name ("Eclipse Web Tools Platform"). But in Tools, since the sub-projects are all fairly different from one another, the Tools PMC decided to use "Eclipse" followed by sub-project name. So, that's "Eclipse Orbit" for us.

There is one exception. We have some bundles that are pre-built and we just store them in our repository. There, the provider name is left as it is, of course, since it is pre-built. But anything we build/assemble should be "Eclipse Orbit".

Avoid packing (pack200) nested jars

Unless there is an important reason to, avoid "packing" jars nested inside Orbit bundles. The reason is that changes in Java 7 make these packed children impossible to extract so tools such as p2 then has to "fall back" and use the plain jar version of the bundle anyway ... all adding up to a slight performance impact. See bug 361628 for more details.

Mechanically, the way to accomplish this is to include a file named 'eclipse.inf' in the META-INF folder that has contents of


Or, if you want to excluded nested jars from packing and from signing, you can use


Whether or not to exclude children from signing depends on how the jar is anticipated to be used. In some cases, consumers might expect it to be signed, in other cases, they might expect it not to be signed. For use in the Eclipse IDE, it does not particularly matter, the default Equinox settings will not 'verify' nested jars, though there are some server runtimes that do. Most bundles in Orbit use jarprocessor.exclude.children=true.

Occasionally, source-bundles also have "nested jars", so those would also need the eclipse.inf file put in their META-INF directory.

Remember to retain important aspect of original jar manifest

Part of the goal of creating Orbit bundles, is that when ever possible, the Orbit bundle can continue to be used as a jar, just as it would have been originally.

In some cases, this means there may be aspects in the original jar's manifest that should be carried over to the manifest in the bundle.

Examples of things important to retain

One example, if the original jar's manifest contains a Main-Class directive, then the bundle's manifest should contain the same Main-Class directives. One case of this is the Rhino bundle (org.mozilla.javascript). It originally contained


which prints the version and starts up an interpreter "shell". It's best to maintain that sort of functionality whenever possible.

Examples of things not to retain

An example of what not to retain was raised in bug 432032. Some jars have Class-Path: directives in their MANIFEST.MF files. This is the "non-OSGi" way of expressing a dependency on another jar (not to be confused with OSGi's Bundle-ClassPath: which is a different concept). In the cases I've seen, these 'Class-Path' directives become meaningless in OSGi bundles, either because the path or the jar referenced in that 'Class-Path' no longer exists, or it exists in a different form, such as with with version information added to the name. In some cases it becomes part of what a bundle "requires", which, naturally, is expressed in the "OSGi way". Having the 'Class-Path' there has no effect on the bundle when run with OSGi and none of our build systems pay attention to it, but as mentioned in bug 432032 there are some build systems that will flag any "non-existing file" or "invalid path" as an error, interfering with the build. Hence, it's a good idea to remove any lines that have a 'Class-Path' directive. In most cases, though, this directive is probably useful in helping you "convert" the information when you create the OSGi bundle, that is, that you can add a proper Require-Bundle: to express the same relationship in the OSGi way.

Export-Package guidelines

Normally, all packages in a bundle should be listed in the Export-Package declaration in MANIFEST.MF.

But, if a bundle has packages that are not normally part of its namespace, those should not be blindly exported, unless it is known that they are supposed to be. That is, the first assumption should be the bundle simply uses those packages internally, and are not part of its API to expose to the rest of the world. See bug 344560 for a case where exporting "foreign" packages can cause problems.

Also, normally, all exported packages should list the version they are exporting. Keep in mind that if a package in an interface, defined by a specification, then the version of the exported package should be the version of the specification, not the bundle it is in. For example, we use "Export-Package: javax.xml;version="1.3", even though the package is in the javax.xml bundle versioned at 1.3.4.

Adding your bundle to the feature.xml

There is a feature in Orbit that is used solely to drive the build. To modify it, checkout the orbit-recipes project. It will be located under releng/aggregationfeature/feature.xml. You'd add your bundle to this feature like any other. For example,

   <plugin id="javax.servlet" version="2.3.0.qualifier" />

Keeping track of legal information

Add a file in org.eclipse.orbit.releng/ip_logs that contains IP log information. See Orbit IP Log for more information.

Adding your bundle to the Orbit Build

See Adding To Build.

Final steps (a.k.a being a good OSS citizen)

It's a good practice to contribute back OSGi packaging - many upstream are not aware of OSGi and will appreciate patches. Having OSGi manifests upstream has a couple of advantages:

  • shared burden of maintenance
  • easier adoption (3rd party software can use newer versions before it is located in Orbit and drive Eclipse migration to latest-and-greatest versions).
  • spreading the word about OSGi

Back to the top