Skip to main content
Jump to: navigation, search

Difference between revisions of "GEF/New and Noteworthy/4.0"

Line 14: Line 14:
Please note that several incompatible changes to the (up to 0.2.0 provisional) API of GEF4 were made. The list of added and removed classes can be found at []. The most notable API changes are outlined below, marking incompatible ones with [INCOMPATIBLE CHANGE].
Please note that several incompatible changes to the (up to 0.2.0 provisional) API of GEF4 were made. The list of added and removed classes can be found at []. The most notable API changes are outlined below, marking incompatible ones with [INCOMPATIBLE CHANGE].
== GEF4 FX (1.0.0) ==
== GEF4 FX (1.0.0) ==

Revision as of 08:58, 5 February 2016


The GEF 4.0.0 (Neon) release provides minor revisions of the production components Draw2d 3.x (3.11.0), GEF (MVC) 3.x (3.11.0), and Zest 1.x (1.7.0), as well as major revisions of the new GEF4 components (1.0.0). As declared in the project plan, the decision about contributing GEF4 in version 1.0.0 (instead of 0.3.0) and an overall 4.0.0 release (instead of 3.11.0) was postponed up to M5. That is, Bugzilla entries commented before Neon M6 will refer to a 3.11.0 release and milestone contributions (including M5) include GEF4 components in version 0.3.0.

Please note that several incompatible changes to the (up to 0.2.0 provisional) API of GEF4 were made. The list of added and removed classes can be found at [1]. The most notable API changes are outlined below, marking incompatible ones with [INCOMPATIBLE CHANGE].

GEF4 FX (1.0.0)

[INCOMPATIBLE CHANGE] Split FX.UI module into FX.SWT and FX.JFace modules (M2)

Renamed FX.UI module into FX.SWT module and added FXColorPicker, FXSimpleLinearGradientPicker, and FXAdvancedLinearGradientPicker, which were provided by MVC.FX.UI module before (refactored from AbstractFXColorPicker, FXColorPicker, FXSimpleGradientPicker, and FXAdvancedGradientPicker). Introduced new FX.JFace module, which provides FXPaintCellEditor and FXPaintSelectionDialog, which were provided by MVC.FX.UI module before (refactored from FXFillCellEditor and FXFillSelectionDialog).

[INCOMPATIBLE CHANGE] Moved over (and refactored) IFXCanvasFactory from MVC.UI

Moved over IFXCanvasFactory and changed signature of the create method to take an additional SWT style.

[INCOMPATIBLE CHANGE] Merged ScrollPaneEx and FXGridCanvas into InfiniteCanvas (M3)

Renamed the ScrollPaneEx to InfiniteCanvas and revised its API. The FXGridLayer has been removed and its functionality was moved to InfiniteCanvas. The InfiniteCanvas does now allow to insert visuals at different "positions" inside of the InfiniteCanvas: underlay group, scrolled underlay group, content group, scrolled overlay group, overlay group.

[INCOMPATIBLE CHANGE] Removed 'FX' prefix from all classes in FX module (M3)

Renamed IFXAnchor to IAnchor, AbstractFXAnchor to AbstractAnchor, FXChopBoxAnchor to ChopBoxAnchor and FXStaticAnchor to StaticAnchor. Renamed FXGeometryNode to GeometryNode. Renamed FXConnection to Connection, IFXDecoration to IConnectionDecoration, and IFXConnectionRouter to IConnectionRouter, FXPolyBezierConnectionRouter to PolyBezierConnectionRouter, and FXPolylineConnectionRouter to PolylineConnectionRouter. Renamed AbstractFXGesture to AbstractGesture, AbstractFXMouseDragGesture to AbstractMouseDragGesture, AbstractFXPinchSpreadGesture to AbstractPinchSpreadGesture, and AbstractFXRotateGesture to AbstractRotateGesture. Split FXUtils into NodeUtils and CursorUtils and moved it into o.e.g4.fx.utils package.

[INCOMPATIBLE CHANGE] Nested IControlFactory inside FXControlAdapter (M3)

Inlined IControlFactory, as it is only useful in the context of an FXControlAdapter.

Add 'clickable-area' around connections (M3)

Add support for having a clickable area that is thicker than the connection stroke and allows to select also very thin connections. Its width is exposed by a property of Connection, so it can be bound (e.g. to adjust the width of the clickable area dependent on the scaling). Enhance the MVC logo example to demonstrate example usage of this feature.

GEF4 MVC (1.0.0)

[INCOMPATIBLE CHANGE] Moved cell editor, dialogs, and pickers from MVC.FX.UI to FX.SWT and FX.JFace (M2)

Refactored AbstractFXColorPicker, FXColorPicker, FXSimpleGradientPicker, and FXAdvancedGradientPicker and moved them into FX.SWT (renamed from FX.UI). Refactored FXFillCellEditor and FXFillSelectionDialog and moved them into FX.JFace.

[INCOMPATIBLE CHANGE] Renamed AbstractPolicy#enableRefreshVisuals() and #disableRefreshVisuals() (M3)

Renamed disableRefreshVisuals() to storeAndDisableRefreshVisuals() and enableRefreshVisuals() to restoreRefreshVisuals().

[INCOMPATIBLE CHANGE] Refactored FXTransformPolicy (MVC.FX) and the related policies (M2)

The FXTransformPolicy now provides an API for the creation and manipulation of transformation matrices. These matrices are then concatenated, together with the initial host transformation matrix, to yield the new host transformation matrix. Therefore, complex transformations can be set up properly at one point, and the important values can be changed later on, e.g. during user interaction.

Moreover, the related policies (FXRelocateConnectionPolicy, FXRelocateOnDragPolicy, FXResizeRelocateOnHandleDragPolicy, FXResizeRelocatePolicy, FXRotatePolicy, FXRotateSelectedOnHandleDragPolicy, FXRotateSelectedOnRotatePolicy, FXScaleRelocateOnHandleDragPolicy, and FXScaleRelocatePolicy) have been renamed to express the actual transformation (e.g. "translate" instead of "relocate"). Additionally, the intermediate FXResizeRelocatePolicy, FXRotatePolicy, and FXScaleRelocatePolicy have been removed. The policies that were dependent on those intermediate policies are now directly using the FXTransformPolicy.

[INCOMPATIBLE CHANGE] Add 'Abstract' prefix to FXEditor and FXView (M3)

Renamed FXEditor to AbstractFXEditor and FXView to AbstractFXView.

[INCOMPATIBLE CHANGE] Refactored ContentPolicy, CreationPolicy, and DeletionPolicy (M3)

Cleaned up ContentPolicy to only provide operations related to the content of the respective host part. It is intended to be registered at each IContentPart. Moved all "higher-level" operations into CreationPolicy and DeletionPolicy, which are to be registered at the IRootPart alone.

Furthermore, updating the selection, hover, and focus models is now handled within the CreationPolicy and the DeletionPolicy and the ClearHoverFocusSelectionOperation has been removed. The CreationPolicy selects and focusses a newly created part. The DeletionPolicy removes the deleted parts from the selection and focus models. Moreover, the CreationPolicy creates the IContentPart before executing operations on the history. Therefore, the content part can be used for live feedback even though the creation is not yet committed.

[INCOMPATIBLE CHANGE] Adjusted API of SelectionModel (M3)

Renamed accessor methods provided by SelectionModel to be more concise. Especially clarified via names, whether an operation appends, prepends, or sets the selection.

Refactored ContentBehavior to prevent deactivation removes all children of host (M3)

Changed the implementation of ContentBehavior to ensure that deactivation does not remove children of its host. This way, deactivation of an FXViewer can now be temporarily applied (to disable all listeners) without loosing the content of the viewer.

GEF4 Graph (1.0.0)

[INCOMPATIBLE CHANGE] Enhanced builder API (M3)

Enhanced the builder API so that graph-, node-, and edge-builders can be chained appropriately. Node-builders can now be provided with an Object-key, that can be referred to by edge-builders.

GEF4 Zest (1.0.0)

[INCOMPATIBLE CHANGE] Factored out Zest.FX.JFace from Zest.FX.UI (M2)

Separeted out the Zest JFace-API into an own module, so it can be consumed without introducing dependencies on the Eclipse Workbench UI.

[INCOMPATIBLE CHANGE] Removed IEdgeDecorationProvider (M3)

Removed IEdgeDecorationProvider from Zest.FX.Jface. Respective ZestProperties.EDGE_SOURCE_DECORATION and ZestProperties.EDGE_TARGET_DECORATION attributes may be provided via IGraphNodeLabelProvider#getEdgeAttributes() instead.

GEF4 DOT (1.0.0)

Introduced new Graphviz preference page (M3)

Introduced a new preference page that allows to specify the installation path of the dot executable. Thereby it does not have to be provided again after each restart.

Back to the top