Skip to main content

Notice: this Wiki will be going read only early in 2024 and edits will no longer be possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

Jump to: navigation, search

Difference between revisions of "GEF/Contributor Guide"

< GEF
(Handling of Bugs)
m (Handling of Bugs)
Line 77: Line 77:
 
* If the committer is not the contributor of the changes, the Git author field should be used to specify the full name of the contributor (see [[Development_Resources/Handling_Git_Contributions]]). In case the changes were approved by means of a contribution questionnaire, the CQ number should be specified in round brackets after the one line summary.
 
* If the committer is not the contributor of the changes, the Git author field should be used to specify the full name of the contributor (see [[Development_Resources/Handling_Git_Contributions]]). In case the changes were approved by means of a contribution questionnaire, the CQ number should be specified in round brackets after the one line summary.
  
== Handling of Bugs ==
+
== Handling Bugs ==
 
When working with bugzillas, the following guidelines should be regarded.
 
When working with bugzillas, the following guidelines should be regarded.
  

Revision as of 11:39, 20 March 2014

Obtaining Source Code

The complete source code of the GEF project (with the exception of the web-site) is hosted at http://git.eclipse.org:

Check out the code (Committers and Contributors) using EGit

To check out the code within your local workspace, perform the following steps:

  1. Copy the URI of the repository you want to clone (following the links provided above, the URIs are listed under the Clone section). Note that committers will have to use the ssh protocol URI, whereas consumers and contributors are encouraged to use the git protocol URI.
  2. Clone the Git repository
    1. Open the Git Repository Exploring Perspective (provided by EGit) within Eclipse, and from the toolbar of the Git Repositories Browser view select to Clone a Git Repository and add the clone to this view.
    2. If the repository URL was copied to clipboard before, the upcoming Clone Git Repository dialog should already provide the necessary entries for URI, Host, and Repository path, so you may simple forward by pressing Next >.
    3. Select the branches you want to clone from remote. The master branch is the one used for the current development stream. Development in maintenance releases is performed in respective maintenance branches. After having selected all branches of interest, press Next > to continue.
    4. Choose a local directory to store the cloned repository (the default will be located under your home directory) and select the Initial branch to check out.
  3. Checkout the projects
    1. Right-click the Working directory entry, located under the org.eclipse.gef (resp. org.eclipse.gef4) repository within the Git Repositories Browser view and from the context menu select to Import Projects....
    2. In the upcoming Import Projects from Git Repository dialog, select to Import existing projects and press Next >.
    3. Choose the projects you want to import (by default all are selected) and press Finish to conclude.

Setting up the workspace

Set up the Target Platform

A target definition file is provided by the org.eclipse.gef.target (as well as the org.eclipse.gef4.target) project. To specify the target platform, simply open the respective target definition (e.g. JUNO_4_2.target) within the Target Editor, let is fully resolve (i.e. wait until the Resolving Target Definition background task has finished and the installable units are listed under the respective Locations), then choose to "Set as Target Platform).

Set up API Tooling

GEF (proper) uses PDE API tooling to guarantee proper handling of version numbering as well as API compatibility, so without definition of an API baseline you will see compile problems after having checked out the code. API-baselines are provided by the org.eclipse.gef.baseline project. You may define them by going to Preferences -> Plug-in Development -> API Baselines, then choose to select "Add Baseline..." and point to the plugins sub-folder of an API baseline located in the baselines project (note that the dialog browses the file system instead of the workspace, so you will have to point into the respective folder in your local Git repository).

Running a headless build locally

GEF (as well as GEF4) uses a Maven/Tycho-based build infrastructure. With the Maven Integration installed, the headless build that is executed by the gef-master and gef4-master Hudson build jobs can also be executed in the local workspace. Make sure you have checked out all projects of a respective git repository (GEF and GEF4 are independent). Then easily run the build by right-clicking the pom.xml file located within the org.eclipse.gef.releng or org.eclipse.gef4.releng project respectively, and selecting 'Run As -> Maven install'. As a result of the build, an update-site will be created in the target sub-folder of the org.eclipse.gef.repository respectively org.eclipse.gef4.repository project. Please note that you need to have a JDK installed (and used by Tycho) rather than a JRE, because the Tycho builds rely on the availability of a javadoc executable for the generation of API documentation in the doc bundles.

Creating a Contribution

You can contribute to GEF either by producing a patch, or via GitHub. In both cases, please include a note in the corresponding Bugzilla entry (you can search for existing bugs, or file a new one) stating that you developed your contribution yourself from scratch, without referencing any third-party libraries, and that you are authorized to contribute it under the EPL. Please indicate if that is not the case, so we can initiate the required process for these cases (multiple contributors, third-party libraries, larger contributions that exceed 250 lines).

Produce a Patch

To contribute a patch, create a branch in your local Git repository for working on your changes, e.g. a fix for bug 321775:

git checkout -b fix-321775

Test, fix, and commit until you're done. Run the Maven build to make sure everything works. Then create a patch including all commits on your branch against master, like this:

git format-patch master --stdout > fix-321775.patch

Finally, attach your patch to the corresponding bug, in this case bug 321775.

Fork via GitHub

To contribute via GitHub, fork the GitHub repository you'd like to contribute to from https://github.com/eclipse (i.e. the GEF or GEF4. Commit, test, and push your contribution to your fork. When you're done, add a link to the Github commit you want to contribute to a comment in the corresponding bugzilla entry, e.g.:

 https://github.com/ujhelyiz/zest/commit/c1a69026477f0852727a2132233e9e61c14b4d8d

For details, see Development_Resources/Handling_Git_Contributions.

Commiting code

Comments

When committing code, the following format should be used:

 '[' ( <bug-id> | 'NONE' ) ']' <one-line-summary-or-single-line-commit-message> (  '(' 'CQ' <cq-number> ')' )?
 
 ( <wrapped-detailed-commit-message> )?

Examples:

 [355997] Add support for calculating bezier curve intersections. (CQ 5976)
 [NONE] Update target definition to Eclipse SDK 4.2.0.I20120222-0915.

Furthermore, the following constraints should be regarded:

  • The bug id of the bug, which is used to track the changes should always be provided, or NONE to indicate that the changes are made without any directly related bug.
  • The commit message should be specified using present tense, declaring why the changes were made.
  • If a commit message is longer than one short line, it should be formatted to have a short, one-line summary, a blank line, and a wrapped longer description (see [1].
  • If the committer is not the contributor of the changes, the Git author field should be used to specify the full name of the contributor (see Development_Resources/Handling_Git_Contributions). In case the changes were approved by means of a contribution questionnaire, the CQ number should be specified in round brackets after the one line summary.

Handling Bugs

When working with bugzillas, the following guidelines should be regarded.

Classifying Bugs

For GEF4, components are pretty fine-grained, so selection of a bugzilla component is usually sufficient to identify the part of the API that is concerned. For Draw2d/GEF (MVC) 3.x this may not be sufficient. We thus use categories for this issue, which will be stated as a [<category_name>] prefix within the bugzilla's summary. The list of currently used categories is:

  • General
    • [TVT] - Translation Verification Tests
  • Draw2d
    • [GraphLayout]
    • [Geometry]
    • [Text]
  • GEF
    • [Command]
    • [DnD]
    • [EditPart]
    • [EditPolicy]
    • [Palette]
    • [Print]
    • [Tool]

Resolving Policy

When resolving bugzillas, it should be stated how the bug is verified. Preferably this is a JUnit test. Alternatively, the bugzilla will say that the defect can be reproduced in the Logic example and you can demonstrate the fix working in the logic example (or other examples using GEF). If the bug is trivial or obvious and does not require a test, we can just state this in the Bugzilla too.

Back to the top