Skip to main content
Jump to: navigation, search

STEM Loggers

Revision as of 15:25, 20 January 2012 by (Talk | contribs) (Projected Image Loggers)

About STEM Loggers

<insert some boilerplate welcome text>

Simulation Logging in STEM

Create a Logger

Creating a STEM Logger is similar to creating STEM Models, Scenarios, Decorators, etc. A wizard is provided to guide you through the steps.

  1. Before you begin, launch STEM, switch to the Design perspective and make sure you have at least one STEM Project in the Project Explorer
  2. Launch the New Logger wizard by clicking the "Create a new logger" button
    STEMLoggers CreateButton.png
  3. This will load the New Logger wizard
    STEMLoggers NewLoggerWizard.png
  4. In the New Logger Wizard, select a Project from the dropdown menu and enter a Name
    Tip: The new logger's configuration will be stored in <PROJECT>/Loggers/<NAME>.logger.
  5. Select a Logger Type from the dropdown menu
    Options include:
    • CSV File Logger
    • Map View Logger
    • Several projected map loggers, including:
      • Equirectangular Map Logger
      • Mercator Map Logger
      • Orthographic Map Logger
      • Azimuthal Equidistant Map Logger
  6. Configure the logger by entering logger type-specific settings
    Note: See the section below for help configuring each logger type
  7. When you're finished, click Next or Finished if you do not need to change the logger Dublin Core metadata
  8. Your new Logger should automatically open in an Editor window
    In the Project Explorer, The Logger should also be listed under the Project's Loggers
    STEMLoggers Editor.png

Add the Logger to a Scenario

Once the Logger is created, you're ready to move on and add it to a Scenario.

  1. In STEM, Create a new Scenario or Open an existing Scenario
  2. Navigate to the Logger you wish to add by expanding its parent Project and then Loggers sub-tree in the Project Explorer
  3. Select the Logger you wish to add and drag it to the Scenario in the Scenario Editor
    Tip: Scenarios can have multiple loggers. Repeat this step for each Logger you want to add to the Scenario
    STEMLoggers Scenario.png
  4. When finished editing, save the Scenario

Simulation Logging

The STEM Logger Manager will automatically attach loggers to a Simulation from a Scenario containing one or more Loggers. By default, Loggers are enabled automatically when a simulation starts (this is configurable in your Logger's properties).

To disable or enable a logger once a simulation start, follow these steps

  1. Open the Active Loggers view
    • Open the Window menu then click Other
    • In the Show View dialog, select Active Loggers and click OK
    STEMLoggers ActiveLoggers.png
  2. In the Active Loggers view, expand the running simulation
  3. Right click on the Logger you wish to control
    • If the Logger is enabled, select Disable Logger to disable
    • If the Logger is disabled, select Enable Logger to enable
    STEMLoggers ActiveLoggersDisableLogger.png

Adding a Logger to a Scenario

Active Loggers View

Logger Configurations

STEM Loggers are configurable on a per-logger basis and contain various settings for each logger type.

General Settings

Setting Type Description
Enabled Boolean Whether the logger is enabled when a simulation starts. Default is "Yes"
Use Default Log Directory Boolean Whether to use the Default Logger Directory (Project/RecordedSimulations folder). Default is "Yes".
Log Directory String/Path Required if Use Default Log Directory is no . Useful if you want to log to an external device.
Run Every n Steps Integer Triggers the logger only every n simulation cycles/steps. A value of 1 runs every step. 2 would run on steps 0, 2, 4, etc. Default is 1.
Compartments to Log List The list of decorator compartments to log. See here for more details.

Delimited File / CSV Logger

Setting Type Description
File Delimeter String The character(s) to use to separate entries in the log. Default is a single comma ',' for CSV.
Log Run Parameters Boolean Whether to write a file containing the parameters used to initialize the simulation. Default is "Yes".
Log Writer Buffer Size Integer The number of bytes to write before flushing the log file buffer. Increased this number for better performance. Default is 1024 bytes.

Projected Image Loggers

Setting Type Description
Image Width Integer The image width in pixels of the image created by the logger. Default is 1000 pixels.
Image Height Integer The image height in pixels of the image created by the logger. Default is 500 pixels.
Force Aspect Ratio Boolean Whether the image's proportions should match those of the objects being written. If yes, the width or height of the image may be changed proportionally to prevent skewing. Default is "Yes".
Fit Canvas to Polygons Boolean Whether the canvas's bounds should be fit to the objects drawn or the projection. If Yes, then the canvas boundary is the bounding box of the objects being drawn. If No, then the canvas boundary is bounding box of the projection (useful for "whole Earth" views, such as creating a Google Maps overlay). Default is "Yes".
Origin Latitude* Number Required only for origin-dependent map projections. The latitude of the principal Y axis of the projection. Default is 0.0.
Origin Longitude* Number Required only for origin-dependent map projections. The latitude of the principal X axis of the projection. Default is 0.0.
Use Logarithmic Scaling Boolean Whether to scale compartment values logarithmically when determining polygon color. Default is "Yes".
Gain Number Multiplier to apply to compartment values when determining polygon color. Default is 1.0.
Use Transparent Background Boolean Whether to make the background transparent or not. If no, the image background is determined by the color provider. Default is "No".
Border Transparency Number Alpha transparency applied to borders. Value in percent from 0 to 100. Default is 25%
Color Provider Class The STEM Color Provider to when determining the polygon fill color.

Map Writer Logger

Setting Type Description
Automatically Open
Map View
Boolean Whether the logger should try to automatically open the STEM Map View. If the STEM Map View is not open, the logger will write a blank image. Default is "Yes".

Creating Your Own Logger

Temp Images

STEMLoggers ActiveLoggers.png STEMLoggers ActiveLoggersDisableLogger.png STEMLoggers CreateButton.png STEMLoggers Editor.png STEMLoggers NewLoggerWizard.png STEMLoggers Scenario.png STEMLoggers SelectCompartments.png

Back to the top