Don't hesitate to make a test by running Mihini on your local computer.
How to activate security with M3DA protocol?
Firstly, you need to compile a module which is not compiled by default. After you build.sh, you must do this command:
$ make all agent_provisioning
Note: Here the following list you can define for encryption and authentication:
- AUTHENTICATION_TYPE = hmac-md5 or hmac-sha1 or none (if you select none for authentication, you must select none for encryption)
- ENCRYPTION_TYPE = aes-cbc-128 or aes-cbc-256 or aes-ctr-128 or aes-ctr-256 or none
1. Choose the authentication algorithm :
2. Choose the encryption algorithm :
3. Generate the keys by using Registration password (shareKey) (=> Compute and store the keys)
require 'agent.provisioning'.registration_password 'xxxx' (needs "make all agent_provisioning" to be executed before)
If you want to remove the authentication:
agent.config.server.authentication = nil
To remove the encryption:
agent.config.server.encryption = nil
To change the password :
require 'agent.provisioning'.password ='xxxx' (needs "make all agent_provisioning" to be executed before)
To remove the password :
* Keys are stored in: /readyagent/build.default/runtime/crypto * Remove the file: crypto.key
Note: If you do a reset factory on your device, the keys are not deleted.
Create a connection:
airvantage=require "airvantage" airvantage.connecttoserver()
Q: I get timeout when I try to contact the server. A: Check the port 4490 is open.