Jump to: navigation, search

Difference between revisions of "JWT Automatic Build"

(Adding new plugins to the JWT release)
(Creating the base)
Line 65: Line 65:
 
* EMF Runtime => ''~/downloads/modeling/emf/emf/downloads/drops/[version]/[buildId]/emf-runtime-[buildId].zip''
 
* EMF Runtime => ''~/downloads/modeling/emf/emf/downloads/drops/[version]/[buildId]/emf-runtime-[buildId].zip''
 
* GEF Runtime => ''~/downloads/tools/gef/downloads/drops/[version]/[buildId]/GEF-runtime-[buildId].zip''
 
* GEF Runtime => ''~/downloads/tools/gef/downloads/drops/[version]/[buildId]/GEF-runtime-[buildId].zip''
 +
* ATL Runtime (for transformations) => ''~/downloads/modeling/m2m/atl/downloads/drops/[version]/[buildId]/m2m-atl-runtime-[version].zip''
  
 
Choosing the version of each project:
 
Choosing the version of each project:

Revision as of 17:19, 12 January 2009

Automatic build of JWT Features and Plugins

Helpful resources

What we did

Before going further, it is necessary that you read and understand links pointed in the "Helpful Resources" section, since they explain how everything works. Next notes are just the steps we followed to get everything working, the don't explain how it works.

Our strategy was to copy ("monkey see, monkey do") an existing and working builder and to adapt it to our needs. The "development process" of our build system was a kind of "Error Driven Development", that infinitely runs the following build loop:

  • Try
  • Check the errors
  • Fix them

Get and adapt a builder

The builder is the directory that contains build informations (ant files and build.properties) and scripts to start the build.

  • We copied the ide4edu.releng project (see link in the "Helpful Resources" section)
  • We externalized all ide4edu specific contents (such as plugins names and paths) from ant script to properties in the build.properties file, so that all project-specific data can be found in the build.properties.
  • We adapted all ide4edu specific value in the build.properties to replace it by JWT specific values
  • We created the map file with JWT plugins and features CVS directories
  • We created a light and sufficient Eclipse base for building
  • We customized the ant scripts to add JWT-specific behavior (such as the fact to automatically choose an update-site according to the build type.

Handle automated testing

Another main point was to have the ability to run unit test on the just build JWT plugins, to avoid silent regressions. Our steps to do so were:

  • Copied an example tester (we used GEF and Platform ones as examples)
  • Same strategy as for the builder: externalize strings from the test.xml to the builder build.properties file, and then adapt values to JWT
  • Added the automated fetching of the test feature in the customTargets.xml
  • Added test plugins and features to the map file
  • In the master test plugin, copied a test.xml from another test plugin (not a test.xml from a tester)
  • In the tester's test.xml, adapt the creation of the runtime we'll use for testing
    • The test runtime is created dynamically as a copy of the build base
    • And we add the JWT plugins and JWT tests plugins in it (expanding zips into the test runtime directory)
  • Update the createUpdateSite.xml so that it copies test results into the update site

P2

We encountered a problem with p2 file generation: Indeed, setting the generate.p2.metadata to true made metadate generated also for the test feature, whereas we do not expect to deliver them.

Then the solution was to set generate.p2.metadata to false, and then to run the p2 generator on the generated update site. The p2.generate ant task does not seem to support the site attribute, thus we simply used an Ant exec task calling the eclipse p2 generator application as we would have done with command-line.

What can still be done

  • Try to use a build/continuous integration server
  • Try to have nightly build
  • Merge builder and tester: Move the test.xml from tester to builder, test and replace references to tester by builder.

What we have

JWT build minimal Eclipse base

In order for the build and automated testing to be working as fast as possible, it is necessary to maintain a build base (in /shared/technology/jwt/base on build.eclipse.org), that contains only the projects that are necessary to build and test JWT, and to ensure that these project are built for for the build server you are using.

Creating the base

To create a build base, you'll need to expand the following projects in the directory you want to use ase the eclipse base:

  • Eclipse platform linux/ppc/gtk => ~/downloads/eclipse/downloads/[buildId]/eclipse-platform-[version]-linux-gtk-ppc.tar.gz
  • Eclipse PDE => ~/downloads/eclipse/downloads/[buildId]/eclipse-PDE-[version].zip
  • Eclipse JDT => ~/downloads/eclipse/downloads/[buildId]/eclipse-JDT-[version].zip
  • EMF Runtime => ~/downloads/modeling/emf/emf/downloads/drops/[version]/[buildId]/emf-runtime-[buildId].zip
  • GEF Runtime => ~/downloads/tools/gef/downloads/drops/[version]/[buildId]/GEF-runtime-[buildId].zip
  • ATL Runtime (for transformations) => ~/downloads/modeling/m2m/atl/downloads/drops/[version]/[buildId]/m2m-atl-runtime-[version].zip

Choosing the version of each project:

  • Currently, JWT build on Eclipse server uses the latest version that contains a Maintenance or Release build (ie buildId starting with R or M)
  • However, we could discuss about trying to build usng stable or milestone builds, to ensure the compatibility with the latest versions of projects. But this would require much more work until we succeed to automate the creation of the base with the latest drops...

Check an existing base

There are 2 ways to check that an eclipse installation matches your machine platform:

  • Try to run the eclipse launcher program (./eclipse). If eclipse starts, it is OK
  • From the eclipse directory, try command ls plugins/ | grep org.eclipse.swt, then you should get a list of plugins, and one of them specifies a os/ws/arch 3-uplet in its name. It must be match your server platform.

If you don't have the same eclipse target and server platforms, then you might be able to build, but testing will be impossible for you.

How to use it

Update sites organisation

First, as it is the case in most of "one feature" projects (such as GEF), JWT now has 3 update sites:

Building on build.eclipse.org

Requirements

Since testing requires the ability to start the eclipse UI, an X server must be started and the DISPLAY environment variable must be correctly set on the build server. See EMF advices about X configuration for more details.

On build.eclipse.org, you can use the Xvfb server started by root on localhost:1.0 (DISPLAY is automatically set to this value when running build.sh)

If you there is a problem with X server, you'll have the bahavior described above:

  • In the build trace, the Java Result: 13 tells you that eclipse could not start
java-test:
     [echo] Running org.eclipse.jwt.we.tests.AllTests. Result file: /shared/technology/jwt/tester/results//org.eclipse.jwt.we.tests.AllTests.xml.
     [java] Java Result: 13
  • In the result file, you see a desperately empty test result
<?xml version="1.0" encoding="UTF-8" ?>
<testsuites />
  • In the eclipse log (tester/results/org.eclipse.jwt.we.tests.AllTests.txt), you can see a message telling you that a problems occurs with display:
org.eclipse.swt.SWTError: No more handles [gtk_init_check() failed]
        at org.eclipse.swt.SWT.error(SWT.java:3803)

Start a build

Anyone who has access to build.eclipse.org can now start a build of cvs HEAD by typing from JWT home folder ./build.sh [buildType] where build type is I (default), S or R, respectively for integration, stable or release build.

This script will start the whole build process and update the update-site for the specified build type.

Start a build on your local machine

If you want to build locally JWT, simply checkout the org.eclipse.jwt/releng CVS module and write a script that starts the build with your local configuration (please do not modify build.sh or build.properties, that are build.eclipse.org files). See build.mistria.openwide.sh for example.

Continuous integration

TODO Note that the PDE build process supports unit testing. I've read about several Eclipse projects that used a continuous integration tool (such as cruise, continuum or hudson) to monitor their builds and test results. I'll try to choose if one of these solutions is fine for JWT.

Releasing Policy

When releasing JWT, here are the steps to follow:

  1. Tag the feature and all plugins included into the release with tag R{releaseVersion} (for example R0.5.0)
  2. Build on build.eclipse.org the feature to release (./build.sh R). The update site is automatically updated.
  3. Increment the feature version number (See Version Numbering)
  4. Increment all plugins versions that will be modified in next release)
  5. Create a buzz about this release!

Adding new plugins to the JWT release

This section describes the steps to follow to add a new plugin to JWT release and get the build working with this add-ons. We'll use an example to facilitate the explanations.

Assume that jwt-we (plugin) now depends on a new plugin (jwt.we.conf.model) that was not part of the automated build before. In such case, some things needs to be updated to build the jwt-we automatically, else you'll get a "missing bundle" error telling you that the build cannot find the jwt.we.conf.model.

  • Ensure that jwt.we.conf.model version ends with .qualifier (see Version Numbering)
  • Add those plugins to the top-level feature (currently jwt-we-feature) with version 0.0.0 (automatically chosen at build time)
  • Add those plugins CVS path to the builder map file (currently releng/maps/jwt.map)
  • If your new plugin depends on other plugins (eg EMFT or M2M projects) that are not included in the build base, add its dependencies to the build base
  • Add the test plugins as dependencies to the top-level test plugin (currently jwt-we-tests)
    • Add them as dependencies to the plugin.xml
    • Add them into the AllTests testSuite of the plugin
    • Add them to the top-level test feature (so that they will be fetched from CVS at build time)
    • Add those plugins CVS path to the builder map file (currently releng/maps/jwt.map)