Difference between revisions of "GEF/Contributor Guide"
|Line 2:||Line 2:|
=== Install e(fx)clipse ===
=== Install e(fx)clipse ===
When developing against GEF4 components that are dependent on JavaFX, e(fx)clipse should be installed. While only the OSGi integration is actually needed, it may come handy to install the overall e(fx)clipse IDE feature, either from [http://download.eclipse.org/efxclipse/updates-released/0.9.0/site http://download.eclipse.org/efxclipse/updates-released/0.9.0/site] or [http://download.eclipse.org/efxclipse/updates-nightly/site http://download.eclipse.org/efxclipse/updates-nightly/site].
When developing against GEF4 components that are dependent on JavaFX, e(fx)clipse should be installed. While only the OSGi integration is actually needed, it may come handy to install the overall e(fx)clipse IDE feature, either from [http://download.eclipse.org/efxclipse/updates-released/0.9.0/site http://download.eclipse.org/efxclipse/updates-released/0.9.0/site] or [http://download.eclipse.org/efxclipse/updates-nightly/site http://download.eclipse.org/efxclipse/updates-nightly/site]
=== Install API Tools Execution Environment Descriptions ===
=== Install API Tools Execution Environment Descriptions ===
Revision as of 10:18, 1 August 2014
- 1 Prepare your IDE
- 2 Obtaining Source Code
- 3 Setting up the workspace
- 4 Running a headless build locally
- 5 Creating a Contribution
- 6 Commiting code
- 7 Handling Bugs
Prepare your IDE
When developing against GEF4 components that are dependent on JavaFX, e(fx)clipse should be installed. While only the OSGi integration is actually needed, it may come handy to install the overall e(fx)clipse IDE feature, either from http://download.eclipse.org/efxclipse/updates-released/0.9.0/site (for Kepler and Java 7) or http://download.eclipse.org/efxclipse/updates-nightly/site (for Juno and Java 8).
When launching a runtime workbench, add
-Dosgi.framework.extensions=org.eclipse.fx.osgi to the VM arguments in the Arguments tab.
Install API Tools Execution Environment Descriptions
All production code GEF and GEF4 bundles (i.e. excluding doc and test bundles) are configured to have API tooling enabled. The API checks, which are configured on a project-specific basis, include checks for references that do not exist in the specified execution environment. As API tooling requires execution environment descriptions to perform the respective checks, these should be installed (you will see warnings for missing execution environment descriptions otherwise otherwise), as outline under Execution_Environments#Installing Execution Environment Descriptions.
Install CDO Version Management Tool
In addition to the API Tools, for the GEF bundles (currently not for GEF4 as there all API is yet provisional) we make use of the CDO Version Management Tool to ensure service revision increments are performed as needed (the tool will provide indications of which bundle and feature versions to update when performing changes on the service level). Please install it from the CDO integration update site.
Install Maven Integration (m2e)
In case you want to run a headless build locally in your workspace, you should install the Maven Integration (m2e), as GEF and GEF4 builds are based on Maven/Tycho.
Obtaining Source Code
The complete source code of the GEF project (with the exception of the web-site) is hosted at http://git.eclipse.org:
- The GEF proper code base (Draw2d and GEF (MVC) 3.x as well as Zest 1.x ) can be found in the GEF Git repository
- The GEF4 provisional code base can be found in the GEF4 Git repository.
Check out the code (Committers and Contributors) using EGit
To check out the code within your local workspace, perform the following steps:
- Copy the URI of the repository you want to clone (following the links provided above, the URIs are listed under the Clone section). Note that committers will have to use the ssh protocol URI, whereas consumers and contributors are encouraged to use the git protocol URI.
- Clone the Git repository
- Open the Git Repository Exploring Perspective (provided by EGit) within Eclipse, and from the toolbar of the Git Repositories Browser view select to Clone a Git Repository and add the clone to this view.
- If the repository URL was copied to clipboard before, the upcoming Clone Git Repository dialog should already provide the necessary entries for URI, Host, and Repository path, so you may simple forward by pressing Next >.
- Select the branches you want to clone from remote. The master branch is the one used for the current development stream. Development in maintenance releases is performed in respective maintenance branches. After having selected all branches of interest, press Next > to continue.
- Choose a local directory to store the cloned repository (the default will be located under your home directory) and select the Initial branch to check out.
- Checkout the projects
- Right-click the Working directory entry, located under the org.eclipse.gef (resp. org.eclipse.gef4) repository within the Git Repositories Browser view and from the context menu select to Import Projects....
- In the upcoming Import Projects from Git Repository dialog, select to Import existing projects and press Next >.
- Choose the projects you want to import (by default all are selected) and press Finish to conclude.
Setting up the workspace
Set up the Target Platform
A target definition file is provided by the
org.eclipse.gef.target (as well as the
org.eclipse.gef4.target) project. To specify the target platform, simply open the respective target definition (e.g. JUNO_4_2.target) within the Target Editor, let is fully resolve (i.e. wait until the Resolving Target Definition background task has finished and the installable units are listed under the respective Locations), then choose to "Set as Target Platform).
Set up API Tooling
GEF (proper) uses PDE API tooling to guarantee proper handling of version numbering as well as API compatibility, so without definition of an API baseline you will see compile problems after having checked out the code. API-baselines are provided by the
org.eclipse.gef.baseline project. You may define them by going to Preferences -> Plug-in Development -> API Baselines, then choose to select "Add Baseline..." and point to the
plugins sub-folder of an API baseline located in the baselines project (note that the dialog browses the file system instead of the workspace, so you will have to point into the respective folder in your local Git repository).
Adjust Java Compiler Preferences (Discouraged access errors/warnings caused by provisional API)
As all GEF4 API is released as being provisional, all GEF4 API packages are released with the x-internal directive (see bug #438900 for details). Dependent on your workspace settings, this may lead to a lot of Java compiler warnings/errors, which result from discouraged API access. You may want to adjust your workspace-wide Java compiler preferences to get rid of them. To do so, go to "Preferences -> Java -> Compiler -> Warnings/Errors", then select the respective severity ("Warning", "Ignore") for the "Deprecated and restricted API -> Discouraged reference (access rule)" entry.
Running a headless build locally
GEF (as well as GEF4) uses a Maven/Tycho-based build infrastructure. With the Maven Integration installed, the headless build that is executed by the gef-master and gef4-master Hudson build jobs can also be executed in the local workspace. Make sure you have checked out all projects of a respective git repository (GEF and GEF4 are independent). Then easily run the build by right-clicking the
pom.xml file located within the
org.eclipse.gef4.releng project respectively, and selecting 'Run As -> Maven install'. As a result of the build, an update-site will be created in the
target sub-folder of the
org.eclipse.gef4.repository project. Please note that you need to have a JDK installed (and used by Tycho) rather than a JRE, because the Tycho builds rely on the availability of a javadoc executable for the generation of API documentation in the doc bundles.
Creating a Contribution
You can contribute to GEF either by producing a patch, or via GitHub. In either case, your contribution should be related to a corresponding Bugzilla entry (you can search for existing bugs, or file a new one).
We can easily consume your contribution (compare Eclipse Legal Process), if:
- you have signed the Eclipse Contributor License Agreement (see Eclipse Foundation Contributor License Agreement), and
- you have stated (in the corresponding Bugzilla entry) that the contribution was developed from scratch, without incorporating content from elsewhere, and that you are authorized to contribute it under the EPL.
If your contribution does not exceed the contribution limit (currently 1000 LOC) this will allow us to simply consume it. If your contribution was not developed from scratch or contains content from other authors, please indicate this on the related Bugzilla entry. As in cases where the contribution exceeds the limit, we will have to open a contribution questionnaire (and may have to ask for additional information via the related Bugzilla) to handle such cases (see Eclipse Legal Process).
Produce a Patch
To contribute a patch, create a branch in your local Git repository for working on your changes, e.g. a fix for bug 321775:
git checkout -b fix-321775
Test, fix, and commit until you're done. Run the Maven build to make sure everything works. Then create a patch including all commits on your branch against master, like this:
git format-patch master --stdout > fix-321775.patch
Finally, attach your patch to the corresponding bug, in this case bug 321775.
Fork via GitHub
To contribute via GitHub, fork the GitHub repository you'd like to contribute to from https://github.com/eclipse (i.e. the GEF or GEF4. Commit, test, and push your contribution to your fork. When you're done, add a link to the Github commit you want to contribute to a comment in the corresponding bugzilla entry, e.g.:
For details, see Development_Resources/Handling_Git_Contributions.
When committing code, the following format should be used:
'[' ( <bug-id> | 'NONE' ) ']' <one-line-summary-or-single-line-commit-message> ( '(' 'CQ' <cq-number> ')' )? ( <wrapped-detailed-commit-message> )?
 Add support for calculating bezier curve intersections. (CQ 5976)
[NONE] Update target definition to Eclipse SDK 4.2.0.I20120222-0915.
Furthermore, the following constraints should be regarded:
- The bug id of the bug, which is used to track the changes should always be provided, or NONE to indicate that the changes are made without any directly related bug.
- The commit message should be specified using present tense, declaring why the changes were made.
- If a commit message is longer than one short line, it should be formatted to have a short, one-line summary, a blank line, and a wrapped longer description (see .
- If the committer is not the contributor of the changes, the Git author field should be used to specify the full name of the contributor (see Development_Resources/Handling_Git_Contributions). In case the changes were approved by means of a contribution questionnaire, the CQ number should be specified in round brackets after the one line summary.
When working with bugzillas, the following guidelines should be regarded.
For GEF4, components are pretty fine-grained, so selection of a bugzilla component is usually sufficient to identify the part of the API that is concerned. For Draw2d/GEF (MVC) 3.x this may not be sufficient. We thus use categories for this issue, which will be stated as a [<category_name>] prefix within the bugzilla's summary. The list of currently used categories is:
- [TVT] - Translation Verification Tests
When resolving bugzillas, it should be stated how the bug is verified. Preferably this is a JUnit test. Alternatively, the bugzilla will say that the defect can be reproduced in the Logic example and you can demonstrate the fix working in the logic example (or other examples using GEF). If the bug is trivial or obvious and does not require a test, we can just state this in the Bugzilla too.