As of Eclipse project build I20080305 (shortly before Eclipse 3.4/Ganymede M6), the Eclipse SDK contains a new provisioning system called Equinox/p2. p2 replaces Update Manager as a mechanism for managing your Eclipse install, searching for updates, and installing new functionality. This document will help you getting started with p2. If you want to explore some of the capabilities of p2 that are not exposed to end users in the Eclipse SDK, see also Equinox p2 Getting Started Admin UI.
p2 user interface
In the workbench, p2 replaces the Help > Software Updates menu entry from Update Manager. The resulting dialog shows the features that are installed, and the features that are available to install. You can add additional update sites by clicking Manage sites in the Available features pane. Or, simply drag and drop a URL link in a browser to the Available features pane. For example, dragging this link (http://download.eclipse.org/eclipse/testUpdates) will add the eclipse test updates site. Select any set of available features and click Install to install them into the current running system.
Equinox p2 Update UI Users Guide provides more information about how the UI works.
You must modify the p2 UI code if you want to Run the p2 UI in a self-hosted workbench.
Before p2, many Eclipse users circumvented Update Manager and installed new plug-ins by dumping them in the eclipse/plugins/ directory and restarting with the -clean command line argument. There are many drawbacks to this "wild west" approach that we won't get into here, but suffice it to say that this approach to installation is not recommended. Although p2 will detect plug-ins added directly to the plugins folder (with an associated startup performance cost), alterations to plug-ins installed by p2 in this directory is not supported. If you manually remove a plug-in installed by p2, or attempt to replace with a different version, p2 will not detect it and may be broken. The short rule of thumb is: if you added something manually, you can remove it manually. If you installed via p2, you should uninstall via p2. The shorter rule of thumb is: don't mess with the plugins folder if you can avoid it. p2 provides a new dropins folder that is much more powerful and allows separation of content managed by p2 from content managed by other means (described below).
When you install a p2-enabled Eclipse application, you will notice some new files and directories that didn't exist before. Here is a subset of a typical Eclipse install tree with some of this new content highlighted:
eclipse/ configuration/ config.ini org.eclipse.equinox.simpleconfigurator/ bundles.info dropins/ features/ p2/ plugins/ eclipse.exe eclipse.ini ...
The file bundles.info contains a list of all the plug-ins installed in the current system. On startup, all the plug-ins listed in this file are given to OSGi as the exact set of plug-ins to run with. Any extra plug-ins in the plugins directory or elsewhere are ignored. If you really want to force Eclipse to startup with a particular set of bundles installed, you could manually edit this file to have the contents you need. However, unless you're just hacking around or testing, editing this file is not recommended. However, it's useful to know about this file so you can see exactly what is installed in the system you are running. Typically, p2 is the interface between this file and the rest of the world. Clients initiate provisioning requests to p2 via API, the GUI or some of the facilities described below, and as a result p2 may install or uninstall bundles from the OSGi runtime by updating the bundles.info file.
The new dropins folder is where you can drop in extra plug-ins if you don't want to use the p2 user interface. See the dropins section for more details. For backwards compatibility, p2 will also detect extra plug-ins dropped into the plugins directory, and install any discovered bundles into the system.
Note that the above tree is just a sample layout of an Eclipse-based application. Very little of this structure is actually guaranteed to take this shape. The configuration directory can be stored separately from the rest of the install using the -configuration command line argument. The bundles and features may be in a shared bundle pool elsewhere on disk. The eclipse.ini and eclipse.exe files may be branded with different names. The p2 directory may also be stored elsewhere when a single management agent is configuring multiple applications. In short, you should never write code that makes assumptions about the relative placement of files and directories in an Eclipse install.
Provisioning operations should generally occur using the p2 UI, or by invoking p2 tools or APIs. However, there are situations where scripts need to install plugins and features via file system operations, and have the new content dynamically discovered by the system either at startup, or while running. To support this kind of low-level manipulation of the system, p2 supports the notion of watched directories. A watched directory is a place where a user or script can drop files and have them discovered by p2. Various policies can be applied to watched directories to configure when they are checked for new content, and whether to eagerly install discovered content.
The Eclipse platform ships with a default watched directory called dropins. The dropins folder is configured to be scanned during startup, and for changes to be immediately applied to the running system. Thus the dropins folder can be used much like the plugins directory was used in the past. A subtle twist on old behavior here is that plug-ins and features added to the dropins folder are properly installed into the system rather than being forced in. This means p2 has an opportunity to confirm that the new plug-in doesn't conflict with other installed plug-ins, and it can even go out and fetch any missing prerequisites of the newly dropped in plug-ins. This also means you can later use the GUI to install extra functionality that depends on the plug-ins in the dropins folder, since p2 knows about them and can reason about their dependencies. In other words, new plug-ins installed via the dropins folder behave exactly like plug-ins installed via the user interface. Note that updating plug-ins which are located under the dropins folder using the p2 UI will result in the updated plug-ins being saved under the main eclipse/plugins and eclipse/features folders and not under the dropins hierarchy as siblings to the older versions of the plug-ins, as might be expected.
Supported dropins formats
The dropins folder supports a variety of layouts, depending on the scale of your application and the desired degree of separation of its parts. The simplest layout is to just drop plug-ins in either jar or directory format directly into the dropins folder:
eclipse/ dropins/ org.eclipse.core.tools_188.8.131.52710121455.jar org.eclipse.releng.tools_3.3.0.v20070412/ plugin.xml tools.jar ... etc ... ...
You can also drop in the traditional Eclipse application or extension layout directly in the dropins folder:
eclipse/ dropins/ eclipse/ features/ plugins/
If you have various different components being dropped in, and you want to keep them separate, you can add an additional layer of folders immediately below the dropins folder that contain traditional Eclipse extensions:
eclipse/ dropins/ emf/ eclipse/ features/ plugins/ gef/ eclipse/ features/ plugins/ ... etc ...
Finally, you can add link files as in the traditional Eclipse links folder:
eclipse/ dropins/ emf.link
Prior to p2, each Eclipse application had its own private plugins directory where the application's software was kept. This had the drawback that systems with two or more Eclipse-based applications installed ended up with significant duplication of software and other artifacts. Furthermore, the common pieces had to be upgraded separately for each application, often resulting in slow downloads of software already available elsewhere on the local system.
To escape from this duplication problem, p2 natively supports the notion of bundle pooling. When using bundle pooling, multiple applications share a common plugins directory where their software is stored. There is no duplication of content, and no duplicated downloads when upgrading software. A Windows system configured to use bundle pooling would have a layout something like this:
Application1/ configuration/ config.ini ... other configuration files for Application1... Application1.exe Application1.ini Application2/ configuration/ config.ini ... other configuration files for Application2... Application2.exe Application2.ini ... Documents and Settings Username .p2/ org/eclipse.equinox.p2.core org/eclipse.equinox.p2.director org/eclipse.equinox.p2.engine org/eclipse.equinox.p2.touchpoint.eclipse plugins/ <-- shared bundle pool
With this layout, all the software is stored in a single plugins directory outside of the application install area. p2 takes care of ensuring that the bundles needed by the various applications in the system are present in the bundle pool.
Running the p2 UI from a self-hosted workbench
We do not yet support a properly configured, self-hosted p2 system (see bug 224658). This means that if you run a self-hosted workbench, the launched Eclipse will not be p2 aware. The p2 UI will notice this and tell you that it cannot open.
If your desire is simply to develop or otherwise play with the new UI, and you don't care that the self hosted workbench is not provisioned, you can load the org.eclipse.equinox.p2.ui.sdk project and change this code in ProvSDKUIActivator.
ProvSDKUIActivator.ANY_PROFILE = true;
This will allow you launch the UI, but please note that the UI will be operating on the installation profile of the host workbench.
Interaction with legacy Update Manager
In Eclipse platform version 3.4, the old Update Manager still exists under the covers for backwards compatibility. You can even re-enable the old Update user interface by enabling the "Classic Update" capability on the General > Capabilities preference page.
However, users will rarely have a need for enabling Update Manager, because p2 is able to install from any update site that was designed for Update Manager. Add the update site you want to use by dragging a URL from a browser into the Available Features page in the Help > Software Updates dialog. The features from that site will be added to the available features list, and from there you can install them into the system.
Update Manager supported the notion of an eclipse/links folder, where *.link files could be dropped in to connect extensions to an Eclipse-based application. For backwards compatibility the links folder is supported by p2 with the same behavior. This is really just a subset of the functionality available in the Dropins folder.
Equinox p2 Removal describes the steps to completely remove p2 from the platform and revert to using the original Eclipse Update Manager. In addition, for Eclipse project 3.4 builds, there is a link on the right hand side of the download page called "Eclipse Classic Update Manager". This gives a link to a script that can be used to remove p2 from any Eclipse SDK, platform binary, or platform SDK build.
Removing p2 from the Eclipse SDK is no longer supported in Galileo (3.5) or later. However, the platform itself is not tied to any particular provisioning technology, so applications are free to choose an alternative provisioning system (or none) depending on their requirements.