Latest revision as of 14:39, 2 June 2010

XMLDirectMapping

Requirements

Provide support for XML direct mapping configuration via XML metadata file.

The following structures are to be extended to support XML direct mapping configuration:

The following should be configurable:

Design

Basic XML direct mapping support

We will use the xml-attribute, xml-element and xml-value structures to support direct mappings. For example, the following XML metadata snippet would be used to setup a direct mapping for an empId attribute:

<xml-attribute java-attribute="empId" />

If empId was to be mapped to id, then the following would be used:

<xml-attribute java-attribute="empId" name="id" />

The same example mapped to an id element:

<xml-element java-attribute="empId" name="id" />

The same example mapped to a simple type:

<xml-value java-attribute="empId" />

Path-based mapping support

We will support path-based mappings on xml-attribute and xml-element via xml-path attribute. If xml-path is present, it is assumed to contain the entire XPath, hence the name and namespace attributes - if set - will be ignored, as well as any xml-element-wrapper declarations. Path-based mappings will not apply to xml-value. An example of configuring a path-based XML direct mapping can be found below, and additional information/examples here.

Positional Mappings

Positional mappings will be supported on xml-element. An example of configuring a positional XML direct mapping can be found below and additional information/examples here. Note that positional mappings cannot be applied to xml-attribute or xml-value.

Read Only

Read only will be supported via boolean attribute on xml-attribute, xml-element and xml-value. An example of configuring a read only XML direct mapping can be found below and here.

Write Only

Write only will be supported via boolean attribute on xml-attribute, xml-element and xml-value. An example of configuring a write only XML direct mapping can be found below and here.

CDATA

CDATA will be supported via boolean attribute on xml-element and xml-value. An example of configuring a XML direct mapping as CDATA can be found below and here. Note that CDATA cannot be applied to xml-attribute.

Null Poilcy

Null policy will be supported via sub-element on xml-attribute, xml-element and xml-value. The proposed schema modifications for the global null policy elements/complex types can be found here. An example of configuring a null policy on an XML direct mapping can be found below.

Get/Set Method Names

The get/set method names on xml-attribute, xml-element and xml-value will be configurable via sub-element. An example of configuring the accessor methods on a XML direct mapping can be found below, and additional examples and proposed schema changes can be found here.

Example: `xml-attribute` & `xml-element`

The following example will demonstrate how to configure XML direct mappings via XML metadata by using xml-attribute & xml-element.

org.example.Employee.java

package org.example;
 
public class Employee {
    public int empId;
    public int projectId;
    public String firstName;
    public String lastName;
    public String projectName;
    public String data1;
    public String data2;
    public double salary;
    public String privateData;
    public String characterData; 
    public String someString;
    public String aString;
 
    @javax.xml.bind.annotation.XmlTransient
    public boolean isSomeStringSet;
 
    String getProject() {
        return projectName; 
    }
 
    void setProject(String name) {
        projectName = name;
    }
 
    String getSomeString() { 
        return someString; 
    }
 
    void setSomeString(String str) {
        someString = str; 
    }
 
    public boolean isSetSomeString(Boolean ignoredParam) {
        return isSomeStringSet;
    }
 
    String getAString() { 
        return aString; 
    }
 
    void setAString(String str) {
        aString = str; 
    }
}

Deployment XML

<class-mapping-descriptor xsi:type="xml-class-mapping-descriptor">
    <alias>Employee</alias>
    <attribute-mappings>
        <attribute-mapping xsi:type="xml-direct-mapping">
           <attribute-name>empId</attribute-name>
           <field name="@id" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
           <attribute-name>firstName</attribute-name>
           <field name="info/personal-info/first-name/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
           <attribute-name>lastName</attribute-name>
           <field name="info/personal-info/last-name/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>mgrId</attribute-name>
            <field name="projects/prj:project/@prj:managerId" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
           <attribute-name>projectName</attribute-name>
           <get-method>getProject</get-method>
           <set-method>setProject</set-method>
           <field name="projects/prj:project/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>data1</attribute-name>
            <field name="pieces-of-data/data[1]/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>data2</attribute-name>
            <field name="pieces-of-data/data[2]/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>salary</attribute-name>
            <read-only>true</read-only>
            <field name="@salary" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>privateData</attribute-name>
            <field name="private-data/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>characterData</attribute-name>
            <field name="character-data/text()" xsi:type="node"/>
            <is-cdata>true</is-cdata>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>projectId</attribute-name>
            <field name="project-id/text()" xsi:type="node"/>
            <null-value xsi:type="xsd:int">-1</null-value>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>someString</attribute-name>
            <get-method>getSomeString</get-method>
            <set-method>setSomeString</set-method>
            <field name="some-string/text()" xsi:type="node"/>
            <null-policy xsi:type="null-policy">
                <null-representation-for-xml>EMPTY_NODE</null-representation-for-xml>
            </null-policy>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>aString</attribute-name>
            <get-method>getAString</get-method>
            <set-method>setAString</set-method>
            <field name="a-string/text()" xsi:type="node"/>
            <null-policy xsi:type="null-policy">
                <empty-node-represents-null>true</empty-node-represents-null>
                <null-representation-for-xml>ABSENT_NODE</null-representation-for-xml>
            </null-policy>
        </attribute-mapping>
    <attribute-mappings>
    <descriptor-type>aggregate</descriptor-type>
    <default-root-element>employee</default-root-element>
    <default-root-element-field name="employee" xsi:type="node"/>
    <namespace-resolver>
        <namespaces>
            <namespace>
                <prefix>prj</prefix>
                <namespace-uri>http://www.example.com/projects</namespace-uri>
            </namespace>
        </namespaces>
    </namespace-resolver>
</class-mapping-descriptor>

XML Instance Document (read)

<?xml version="1.0" encoding="UTF-8"?>
<ns0:employee id="66" salary="123456.78" xmlns:ns0="http://www.example.com/employees" xmlns:prj="http://www.example.com/projects" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <projects>
        <prj:project prj:managerId="99">XML External Metadata Support</prj:project>
    </projects>
    <info>
        <personal-info>
            <first-name>Joe</first-name>
            <last-name>Oracle</last-name>
        </personal-info>
    </info>
    <project-id/>
    <pieces-of-data>
        <data>data one</data>
        <data>data two</data>
        <data>data three</data>
    </pieces-of-data>
    <private-data>This is some private data</private-data>
    <character-data><![CDATA[<characters>a b c d e f g</characters>]]></character-data>
    <some-string />
</ns0:employee>

XML Instance Document (write)

<?xml version="1.0" encoding="UTF-8"?>
<ns0:employee id="66" xmlns:ns0="http://www.example.com/employees" xmlns:prj="http://www.example.com/projects" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <projects>
        <prj:project prj:managerId="99">XML External Metadata Support</prj:project>
    </projects>
    <project-id>999</project-id>
    <info>
        <personal-info>
            <first-name>Joe</first-name>
            <last-name>Oracle</last-name>
        </personal-info>
    </info>
    <pieces-of-data>
        <data>data one</data>
        <data>data two</data>
    </pieces-of-data>
    <private-data>This is some private data</private-data>
    <character-data><![CDATA[<characters>a b c d e f g</characters>]]></character-data>
    <some-string xsi:nil="true" />
    <a-string/>
</ns0:employee>

org/example/eclipselink-oxm.xml

This XML file demonstrates configuring XML direct mappings on the "org.example.Employee" class.

<?xml version="1.0" encoding="US-ASCII"?>
<xml-bindings xmlns="http://www.eclipse.org/eclipselink/xsds/persistence/oxm"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
  xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <xml-schema namespace="http://www.example.com/employees">
        <xml-ns namespace-uri="http://www.example.com/projects" prefix="prj"/>
    </xml-schema>
    <java-types>
        <java-type name="org.example.Employee" xml-accessor-type="FIELD">
            <xml-root-element name="employee" />
            <java-attributes>
                <xml-attribute java-attribute="empId" xml-path="@id" />
                <xml-attribute java-attribute="salary" read-only="true" />
                <xml-attribute java-attribute="mgrId" xml-path="projects/prj:project/@prj:managerId" />
                <xml-element java-attribute="firstName" xml-path="info/personal-info/first-name/text()" />
                <xml-element java-attribute="lastName" xml-path="info/personal-info/last-name/text()" />
                <xml-element java-attribute="data2" xml-path="pieces-of-data/data[2]/text()" />
                <xml-element java-attribute="data1" xml-path="pieces-of-data/data[1]/text()" />
                <xml-element java-attribute="privateData" name="private-data" write-only="true" />
                <xml-element java-attribute="characterData" name="character-data" cdata="true" />
                <xml-element java-attribute="projectId" name="project-id" default-value="-1" />
                <xml-element java-attribute="projectName" xml-path="projects/prj:project/text()">
                    <xml-access-methods get-method="getProject" set-method="setProject" />
                </xml-element>
                <xml-element java-attribute="someString" name="some-string">
                    <xml-access-methods get-method="getSomeString" set-method="setSomeString" />
                    <xml-is-set-null-policy xsi-nil-represents-null="true" null-representation-for-xml="XSI_NIL" is-set-method-name="isSetSomeString">
                        <is-set-parameter value="false" type="java.lang.Boolean" />
                    </xml-is-set-null-policy>
                </xml-element>
                <xml-element java-attribute="aString" name="a-string">
                    <xml-access-methods get-method="getAString" set-method="setAString" />
                    <xml-null-policy null-representation-for-xml="EMPTY_NODE" />
                </xml-element>
            </java-attributes>
        </java-type>
    </java-types>
</xml-bindings>

Example: `xml-value`

The following example will demonstrate how to configure XML direct mappings via XML metadata by using xml-value.

org.example.Price.java

package org.example;
 
public class Price {
    public java.math.BigDecimal price;
    public String currency;
 
    java.math.BigDecimal getPrice() { 
        return price; 
    }
 
    void setPrice(java.math.BigDecimal price) {
        this.price = price; 
    }
}

Deployment XML

<class-mapping-descriptor xsi:type="xml-class-mapping-descriptor">
    <class>org.example.Price</class>
    <alias>Price</alias>
    <attribute-mappings>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>price</attribute-name>
            <read-only>true</read-only>
            <set-method>setPrice</set-method>
            <field name="price-data/text()" xsi:type="node"/>
        </attribute-mapping>
        <attribute-mapping xsi:type="xml-direct-mapping">
            <attribute-name>currency</attribute-name>
            <field name="@currency" xsi:type="node"/>
        </attribute-mapping>
    </attribute-mappings>
    <descriptor-type>aggregate</descriptor-type>
    <default-root-element>price-data</default-root-element>
    <default-root-element-field name="price-data"/>
</class-mapping-descriptor>

XML Instance Document (read)

<?xml version="1.0" encoding="UTF-8"?>
<price-data currency="CAD">123.4560000000000030695446184836328029632568359375</price-data>

XML Instance Document (write)

<?xml version="1.0" encoding="UTF-8"?>
<price-data currency="CAD"/>

org/example/eclipselink-oxm.xml

This XML file demonstrates configuring XML direct mappings on the "org.example.Price" class.

<?xml version="1.0" encoding="US-ASCII"?>
<xml-bindings xmlns="http://www.eclipse.org/eclipselink/xsds/persistence/oxm">
    <java-types>
        <java-type name="org.example.Price" xml-accessor-type="FIELD">
            <xml-root-element name="price-data" />
            <java-attributes>
                <xml-value java-attribute="price" read-only="true">
                    <xml-access-methods get-method="getPrice" set-method="setPrice" />
                </xml-value>
                <xml-attribute java-attribute="currency" />
            </java-attributes>
        </java-type>
    </java-types>
</xml-bindings>

Open Issues

This section lists the open issues that are still pending that must be decided prior to fully implementing this project's requirements.

Issue#	Owner	Description/Notes

Decisions

This section lists decisions made. These are intended to document the resolution of open issues or constraints added to the project that are important.

Issue#	Description/Notes	Decision

Future Considerations

During the research for this project the following items were identified as out of scope but are captured here as potential future enhancements. If agreed upon during the review process these should be logged in the bug system.

Notice: this Wiki will be going read only early in 2024 and edits will no longer be possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

Difference between revisions of "EclipseLink/DesignDocs/293925/MOXyExtensions/XMLDirectMapping"

Latest revision as of 14:39, 2 June 2010

Contents

XMLDirectMapping

Requirements

Design

Basic XML direct mapping support

Path-based mapping support

Positional Mappings

Read Only

Write Only

CDATA

Null Poilcy

Get/Set Method Names

Example: `xml-attribute` & `xml-element`

org.example.Employee.java

Deployment XML

XML Instance Document (read)

XML Instance Document (write)

org/example/eclipselink-oxm.xml

Example: `xml-value`

org.example.Price.java

Deployment XML

XML Instance Document (read)

XML Instance Document (write)

org/example/eclipselink-oxm.xml

Open Issues

Decisions

Future Considerations

@@ Line 12: / Line 12: @@
 The following should be configurable:
-* Path-based mappings
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#Path-based_mapping_support Path-based mappings]
-* Positional Mappings
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#Positional_Mappings Positional Mappings]
-* Read only (boolean)
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#Read_Only Read only]
-* Write only (boolean)
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#Write_Only Write only]
-* CDATA (boolean)
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#CDATA CDATA]
-* Converters
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#Null_Poilcy Null policy]
-* Default null value
+* [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#Get.2FSet_Method_Names Get/set method names]
-* Null policy
-* Get/set method names
 == Design ==
@@ Line 42: / Line 40: @@
 === Path-based mapping support ===
-We will support path-based mappings on <code>xml-attribute</code> and <code>xml-element</code> by making use of the <code>xml-element-wrapper</code> structure.  Path-based mappings will not apply to <code>xml-value</code>.  An example of configuring a path-based XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Basic_configuration here].
+We will support path-based mappings on <code>xml-attribute</code> and <code>xml-element</code> via xml-path attribute. If xml-path is present, it is assumed to contain the entire XPath, hence the name and namespace attributes - if set - will be ignored, as well as any xml-element-wrapper declarations. Path-based mappings will not apply to <code>xml-value</code>.  An example of configuring a path-based XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#org.2Fexample.2Feclipselink-oxm.xml below], and additional information/examples [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Basic_configuration here].
 === Positional Mappings ===
@@ Line 48: / Line 46: @@
 === Read Only ===
-Read only will be supported via boolean attribute on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code>.  An example of configuring a read only XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Read_only here].
+Read only will be supported via boolean attribute on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code>.  An example of configuring a read only XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#org.2Fexample.2Feclipselink-oxm.xml below] and [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Read_only here].
 === Write Only ===
-Write only will be supported via boolean attribute on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code>.  An example of configuring a write only XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Write_only here].
+Write only will be supported via boolean attribute on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code>.  An example of configuring a write only XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#org.2Fexample.2Feclipselink-oxm.xml below] and [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Write_only here].
 === CDATA ===
-CDATA will be supported via boolean attribute on <code>xml-element</code> and <code>xml-value</code>.  An example of configuring a XML direct mapping as CDATA can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#CDATA here].  Note that CDATA cannot be applied to <code>xml-attribute</code>.
+CDATA will be supported via boolean attribute on <code>xml-element</code> and <code>xml-value</code>.  An example of configuring a XML direct mapping as CDATA can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#org.2Fexample.2Feclipselink-oxm.xml below] and [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#CDATA here].  Note that CDATA cannot be applied to <code>xml-attribute</code>.
-=== Default Null Value ===
+=== Null Poilcy ===
-To support default null value configuration, a sub-element will be added to xml-attribute, xml-element and xml-value.  An example of configuring the null value on a XML direct mapping, as well as the proposed schema change, can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Default_Null_Value here].
+Null policy will be supported via sub-element on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code>.  The proposed schema modifications for the global null policy elements/complex types can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Null_Policy here].  An example of configuring a null policy on an XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#org.2Fexample.2Feclipselink-oxm.xml below].
 === Get/Set Method Names ===
-The get/set method names on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code> will be configurable via sub-element.  An example of configuring the accessor methods on a XML direct mapping, as well as the proposed schema changes, can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Get.2FSet_Method_Names here].
+The get/set method names on <code>xml-attribute</code>, <code>xml-element</code> and <code>xml-value</code> will be configurable via sub-element.  An example of configuring the accessor methods on a XML direct mapping can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/XMLDirectMapping#org.2Fexample.2Feclipselink-oxm.xml below], and additional examples and proposed schema changes can be found [http://wiki.eclipse.org/EclipseLink/DesignDocs/293925/MOXyExtensions#Get.2FSet_Method_Names here].
-== Example ==
+== Example:  <code>xml-attribute</code> & <code>xml-element</code> ==
-The following example will demonstrate how to configure XML direct mappings via XML metadata.
+The following example will demonstrate how to configure XML direct mappings via XML metadata by using <code>xml-attribute</code> & <code>xml-element</code>.
 === org.example.Employee.java  ===
@@ Line 71: / Line 69: @@
 public class Employee {
      public int empId;
+    public int projectId;
      public String firstName;
      public String lastName;
@@ Line 76: / Line 75: @@
      public String data1;
      public String data2;
+    public double salary;
+    public String privateData;
+    public String characterData;
+    public String someString;
+    public String aString;
+    @javax.xml.bind.annotation.XmlTransient
+    public boolean isSomeStringSet;
      String getProject() {
@@ Line 83: / Line 90: @@
      void setProject(String name) {
          projectName = name;
+    }
+    String getSomeString() {
+        return someString;
+    }
+    void setSomeString(String str) {
+        someString = str;
+    }
+    public boolean isSetSomeString(Boolean ignoredParam) {
+        return isSomeStringSet;
+    }
+    String getAString() {
+        return aString;
+    }
+    void setAString(String str) {
+        aString = str;
      }
 }
@@ Line 106: / Line 133: @@
          <attribute-mapping xsi:type="xml-direct-mapping">
              <attribute-name>mgrId</attribute-name>
-             <field name="projects/prj:project/@managerId" xsi:type="node"/>
+             <field name="projects/prj:project/@prj:managerId" xsi:type="node"/>
          </attribute-mapping>
          <attribute-mapping xsi:type="xml-direct-mapping">
@@ Line 121: / Line 148: @@
              <attribute-name>data2</attribute-name>
              <field name="pieces-of-data/data[2]/text()" xsi:type="node"/>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>salary</attribute-name>
+            <read-only>true</read-only>
+            <field name="@salary" xsi:type="node"/>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>privateData</attribute-name>
+            <field name="private-data/text()" xsi:type="node"/>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>characterData</attribute-name>
+            <field name="character-data/text()" xsi:type="node"/>
+            <is-cdata>true</is-cdata>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>projectId</attribute-name>
+            <field name="project-id/text()" xsi:type="node"/>
+            <null-value xsi:type="xsd:int">-1</null-value>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>someString</attribute-name>
+            <get-method>getSomeString</get-method>
+            <set-method>setSomeString</set-method>
+            <field name="some-string/text()" xsi:type="node"/>
+            <null-policy xsi:type="null-policy">
+                <null-representation-for-xml>EMPTY_NODE</null-representation-for-xml>
+            </null-policy>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>aString</attribute-name>
+            <get-method>getAString</get-method>
+            <set-method>setAString</set-method>
+            <field name="a-string/text()" xsi:type="node"/>
+            <null-policy xsi:type="null-policy">
+                <empty-node-represents-null>true</empty-node-represents-null>
+                <null-representation-for-xml>ABSENT_NODE</null-representation-for-xml>
+            </null-policy>
          </attribute-mapping>
      <attribute-mappings>
@@ Line 133: / Line 198: @@
              </namespace>
          </namespaces>
-        <default-namespace-uri>http://www.example.com/employees</default-namespace-uri>
      </namespace-resolver>
 </class-mapping-descriptor>
 </source>
-=== XML Instance Document  ===
+=== XML Instance Document (read) ===
 <source lang="xml">
 <?xml version="1.0" encoding="UTF-8"?>
-<employee id="66" xmlns="http://www.example.com/employees" xmlns:prj="http://www.example.com/projects">
+<ns0:employee id="66" salary="123456.78" xmlns:ns0="http://www.example.com/employees" xmlns:prj="http://www.example.com/projects" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <projects>
-         <prj:project managerId="99">XML External Metadata Support</prj:project>
+         <prj:project prj:managerId="99">XML External Metadata Support</prj:project>
      </projects>
      <info>
@@ Line 151: / Line 215: @@
          </personal-info>
      </info>
+    <project-id/>
      <pieces-of-data>
          <data>data one</data>
          <data>data two</data>
+        <data>data three</data>
      </pieces-of-data>
-</employee>
+    <private-data>This is some private data</private-data>
+    <character-data><![CDATA[<characters>a b c d e f g</characters>]]></character-data>
+    <some-string />
+</ns0:employee>
+</source>
+=== XML Instance Document (write) ===
+<source lang="xml">
+<?xml version="1.0" encoding="UTF-8"?>
+<ns0:employee id="66" xmlns:ns0="http://www.example.com/employees" xmlns:prj="http://www.example.com/projects" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+    <projects>
+        <prj:project prj:managerId="99">XML External Metadata Support</prj:project>
+    </projects>
+    <project-id>999</project-id>
+    <info>
+        <personal-info>
+            <first-name>Joe</first-name>
+            <last-name>Oracle</last-name>
+        </personal-info>
+    </info>
+    <pieces-of-data>
+        <data>data one</data>
+        <data>data two</data>
+    </pieces-of-data>
+    <private-data>This is some private data</private-data>
+    <character-data><![CDATA[<characters>a b c d e f g</characters>]]></character-data>
+    <some-string xsi:nil="true" />
+    <a-string/>
+</ns0:employee>
 </source>
@@ Line 162: / Line 256: @@
 <source lang="xml">
 <?xml version="1.0" encoding="US-ASCII"?>
-<xml-bindings xmlns="http://www.eclipse.org/eclipselink/xsds/persistence/oxm">
+<xml-bindings xmlns="http://www.eclipse.org/eclipselink/xsds/persistence/oxm"
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xmlns:xs="http://www.w3.org/2001/XMLSchema">
      <xml-schema namespace="http://www.example.com/employees">
          <xml-ns namespace-uri="http://www.example.com/projects" prefix="prj"/>
      </xml-schema>
      <java-types>
-         <java-type name="org.example.Employee">
+         <java-type name="org.example.Employee" xml-accessor-type="FIELD">
              <xml-root-element name="employee" />
              <java-attributes>
-                 <xml-attribute java-attribute="empId" name="id" />
+                 <xml-attribute java-attribute="empId" xml-path="@id" />
-                 <xml-element java-attribute="firstName" name="first-name">
+                 <xml-attribute java-attribute="salary" read-only="true" />
-                    <xml-element-wrapper name="info/personal-info" />
+                <xml-attribute java-attribute="mgrId" xml-path="projects/prj:project/@prj:managerId" />
-                </xml-element>
+                 <xml-element java-attribute="firstName" xml-path="info/personal-info/first-name/text()" />
-                 <xml-element java-attribute="lastName" name="last-name" >
+                <xml-element java-attribute="lastName" xml-path="info/personal-info/last-name/text()" />
-                    <xml-element-wrapper name="info/personal-info" />
+                 <xml-element java-attribute="data2" xml-path="pieces-of-data/data[2]/text()" />
-                 </xml-element>
+                 <xml-element java-attribute="data1" xml-path="pieces-of-data/data[1]/text()" />
-                 <xml-attribute java-attribute="mgrId" name="managerId" >
+                <xml-element java-attribute="privateData" name="private-data" write-only="true" />
-                    <xml-element-wrapper name="projects/prj:project" />
+                 <xml-element java-attribute="characterData" name="character-data" cdata="true" />
-                 </xml-attribute>
+                 <xml-element java-attribute="projectId" name="project-id" default-value="-1" />
-                 <xml-element java-attribute="projectName" name="project" namespace="http://www.example.com/projects">
+                <xml-element java-attribute="projectName" xml-path="projects/prj:project/text()">
-                    <xml-element-wrapper name="projects" />
                      <xml-access-methods get-method="getProject" set-method="setProject" />
                  </xml-element>
-                 <xml-element java-attribute="data2" name="data[2]">
+                 <xml-element java-attribute="someString" name="some-string">
-                     <xml-element-wrapper name="pieces-of-data" />
+                     <xml-access-methods get-method="getSomeString" set-method="setSomeString" />
+                    <xml-is-set-null-policy xsi-nil-represents-null="true" null-representation-for-xml="XSI_NIL" is-set-method-name="isSetSomeString">
+                        <is-set-parameter value="false" type="java.lang.Boolean" />
+                    </xml-is-set-null-policy>
                  </xml-element>
-                 <xml-element java-attribute="data1" name="data[1]">
+                 <xml-element java-attribute="aString" name="a-string">
-                     <xml-element-wrapper name="pieces-of-data" />
+                     <xml-access-methods get-method="getAString" set-method="setAString" />
+                    <xml-null-policy null-representation-for-xml="EMPTY_NODE" />
                  </xml-element>
+            </java-attributes>
+        </java-type>
+    </java-types>
+</xml-bindings>
+</source>
+== Example:  <code>xml-value</code> ==
+The following example will demonstrate how to configure XML direct mappings via XML metadata by using <code>xml-value</code>.
+=== org.example.Price.java  ===
+<source lang="java">
+package org.example;
+public class Price {
+    public java.math.BigDecimal price;
+    public String currency;
+    java.math.BigDecimal getPrice() {
+        return price;
+    }
+    void setPrice(java.math.BigDecimal price) {
+        this.price = price;
+    }
+}
+</source>
+=== Deployment XML  ===
+<source lang="xml">
+<class-mapping-descriptor xsi:type="xml-class-mapping-descriptor">
+    <class>org.example.Price</class>
+    <alias>Price</alias>
+    <attribute-mappings>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>price</attribute-name>
+            <read-only>true</read-only>
+            <set-method>setPrice</set-method>
+            <field name="price-data/text()" xsi:type="node"/>
+        </attribute-mapping>
+        <attribute-mapping xsi:type="xml-direct-mapping">
+            <attribute-name>currency</attribute-name>
+            <field name="@currency" xsi:type="node"/>
+        </attribute-mapping>
+    </attribute-mappings>
+    <descriptor-type>aggregate</descriptor-type>
+    <default-root-element>price-data</default-root-element>
+    <default-root-element-field name="price-data"/>
+</class-mapping-descriptor>
+</source>
+=== XML Instance Document (read) ===
+<source lang="xml">
+<?xml version="1.0" encoding="UTF-8"?>
+<price-data currency="CAD">123.4560000000000030695446184836328029632568359375</price-data>
+</source>
+=== XML Instance Document (write) ===
+<source lang="xml">
+<?xml version="1.0" encoding="UTF-8"?>
+<price-data currency="CAD"/>
+</source>
+=== org/example/eclipselink-oxm.xml ===
+This XML file demonstrates configuring XML direct mappings on the "org.example.Price" class.
+<source lang="xml">
+<?xml version="1.0" encoding="US-ASCII"?>
+<xml-bindings xmlns="http://www.eclipse.org/eclipselink/xsds/persistence/oxm">
+    <java-types>
+        <java-type name="org.example.Price" xml-accessor-type="FIELD">
+            <xml-root-element name="price-data" />
+            <java-attributes>
+                <xml-value java-attribute="price" read-only="true">
+                    <xml-access-methods get-method="getPrice" set-method="setPrice" />
+                </xml-value>
+                <xml-attribute java-attribute="currency" />
              </java-attributes>
          </java-type>

Breadcrumbs

Notice: this Wiki will be going read only early in 2024 and edits will no longer be possible. Please see: https://gitlab.eclipse.org/eclipsefdn/helpdesk/-/wikis/Wiki-shutdown-plan for the plan.

Difference between revisions of "EclipseLink/DesignDocs/293925/MOXyExtensions/XMLDirectMapping"

Latest revision as of 14:39, 2 June 2010

Contents

XMLDirectMapping

Requirements

Design

Basic XML direct mapping support

Path-based mapping support

Positional Mappings

Read Only

Write Only

CDATA

Null Poilcy

Get/Set Method Names

Example: xml-attribute & xml-element

org.example.Employee.java

Deployment XML

XML Instance Document (read)

XML Instance Document (write)

org/example/eclipselink-oxm.xml

Example: xml-value

org.example.Price.java

Deployment XML

XML Instance Document (read)

XML Instance Document (write)

org/example/eclipselink-oxm.xml

Open Issues

Decisions

Future Considerations

Example: `xml-attribute` & `xml-element`

Example: `xml-value`