Difference between revisions of "DLTK Ruby RemoteDebugger"

From Eclipsepedia

Jump to: navigation, search
(New page: This document describes how to start remote debugger using fast ruby debugger (ruby-debug gem). == Extract DLTK ruby code == You need to extract .rb files from the following plugins - or...)
 
Line 9: Line 9:
 
for example I have extracted them to the C:\DLTK-RUBY-DBG, now that folder contains the following files:
 
for example I have extracted them to the C:\DLTK-RUBY-DBG, now that folder contains the following files:
  
C:\DLTK-RUBY-DBG\AbstractRunner.rb
+
- C:\DLTK-RUBY-DBG\AbstractRunner.rb
C:\DLTK-RUBY-DBG\FastRunner.rb
+
- C:\DLTK-RUBY-DBG\FastRunner.rb
C:\DLTK-RUBY-DBG\common\FileLogManager.rb
+
- C:\DLTK-RUBY-DBG\common\FileLogManager.rb
C:\DLTK-RUBY-DBG\common\Logger.rb
+
- C:\DLTK-RUBY-DBG\common\Logger.rb
C:\DLTK-RUBY-DBG\common\NullLogManager.rb
+
- C:\DLTK-RUBY-DBG\common\NullLogManager.rb
C:\DLTK-RUBY-DBG\common\Params.rb
+
- C:\DLTK-RUBY-DBG\common\Params.rb
C:\DLTK-RUBY-DBG\common\StdoutLogManager.rb
+
- C:\DLTK-RUBY-DBG\common\StdoutLogManager.rb
C:\DLTK-RUBY-DBG\dbgp\BreakpointElement.rb
+
- C:\DLTK-RUBY-DBG\dbgp\BreakpointElement.rb
C:\DLTK-RUBY-DBG\dbgp\CaptureManager.rb
+
- C:\DLTK-RUBY-DBG\dbgp\CaptureManager.rb
C:\DLTK-RUBY-DBG\dbgp\Command.rb
+
- C:\DLTK-RUBY-DBG\dbgp\Command.rb
C:\DLTK-RUBY-DBG\dbgp\CommandHandler.rb
+
- C:\DLTK-RUBY-DBG\dbgp\CommandHandler.rb
C:\DLTK-RUBY-DBG\dbgp\Communicator.rb
+
- C:\DLTK-RUBY-DBG\dbgp\Communicator.rb
C:\DLTK-RUBY-DBG\dbgp\DbgpThread.rb
+
- C:\DLTK-RUBY-DBG\dbgp\DbgpThread.rb
C:\DLTK-RUBY-DBG\dbgp\ErrorElement.rb
+
- C:\DLTK-RUBY-DBG\dbgp\ErrorElement.rb
C:\DLTK-RUBY-DBG\dbgp\ErrorMessages.rb
+
- C:\DLTK-RUBY-DBG\dbgp\ErrorMessages.rb
C:\DLTK-RUBY-DBG\dbgp\InitPacket.rb
+
- C:\DLTK-RUBY-DBG\dbgp\InitPacket.rb
C:\DLTK-RUBY-DBG\dbgp\PropertyElement.rb
+
- C:\DLTK-RUBY-DBG\dbgp\PropertyElement.rb
C:\DLTK-RUBY-DBG\dbgp\PropertyUtils.rb
+
- C:\DLTK-RUBY-DBG\dbgp\PropertyUtils.rb
C:\DLTK-RUBY-DBG\dbgp\Response.rb
+
- C:\DLTK-RUBY-DBG\dbgp\Response.rb
C:\DLTK-RUBY-DBG\dbgp\SourceManager.rb
+
- C:\DLTK-RUBY-DBG\dbgp\SourceManager.rb
C:\DLTK-RUBY-DBG\dbgp\StackLevelElement.rb
+
- C:\DLTK-RUBY-DBG\dbgp\StackLevelElement.rb
C:\DLTK-RUBY-DBG\dbgp\StreamPacket.rb
+
- C:\DLTK-RUBY-DBG\dbgp\StreamPacket.rb
C:\DLTK-RUBY-DBG\dbgp\ThreadEventHandler.rb
+
- C:\DLTK-RUBY-DBG\dbgp\ThreadEventHandler.rb
C:\DLTK-RUBY-DBG\dbgp\ThreadManager.rb
+
- C:\DLTK-RUBY-DBG\dbgp\ThreadManager.rb
C:\DLTK-RUBY-DBG\dbgp\Utils.rb
+
- C:\DLTK-RUBY-DBG\dbgp\Utils.rb
C:\DLTK-RUBY-DBG\dbgp\XmlElement.rb
+
- C:\DLTK-RUBY-DBG\dbgp\XmlElement.rb
C:\DLTK-RUBY-DBG\debugger\AbstractBreakpointManager.rb
+
- C:\DLTK-RUBY-DBG\debugger\AbstractBreakpointManager.rb
C:\DLTK-RUBY-DBG\debugger\AbstractContext.rb
+
- C:\DLTK-RUBY-DBG\debugger\AbstractContext.rb
C:\DLTK-RUBY-DBG\debugger\AbstractDebugger.rb
+
- C:\DLTK-RUBY-DBG\debugger\AbstractDebugger.rb
C:\DLTK-RUBY-DBG\debugger\BreakpointContracts.rb
+
- C:\DLTK-RUBY-DBG\debugger\BreakpointContracts.rb
C:\DLTK-RUBY-DBG\debugger\DebugEventHandler.rb
+
- C:\DLTK-RUBY-DBG\debugger\DebugEventHandler.rb
C:\DLTK-RUBY-DBG\debugger\Exceptions.rb
+
- C:\DLTK-RUBY-DBG\debugger\Exceptions.rb
C:\DLTK-RUBY-DBG\debugger\FeatureManager.rb
+
- C:\DLTK-RUBY-DBG\debugger\FeatureManager.rb
C:\DLTK-RUBY-DBG\debugger\SimpleBreakpoints.rb
+
- C:\DLTK-RUBY-DBG\debugger\SimpleBreakpoints.rb
C:\DLTK-RUBY-DBG\debugger\StackLevelInfo.rb
+
- C:\DLTK-RUBY-DBG\debugger\StackLevelInfo.rb
C:\DLTK-RUBY-DBG\fast\FastBreakpointManager.rb
+
- C:\DLTK-RUBY-DBG\fast\FastBreakpointManager.rb
C:\DLTK-RUBY-DBG\fast\FastContext.rb
+
- C:\DLTK-RUBY-DBG\fast\FastContext.rb
C:\DLTK-RUBY-DBG\fast\FastDebugger.rb
+
- C:\DLTK-RUBY-DBG\fast\FastDebugger.rb
C:\DLTK-RUBY-DBG\fast\FastLineBreakpoint.rb
+
- C:\DLTK-RUBY-DBG\fast\FastLineBreakpoint.rb
  
 
== Start debugger ==
 
== Start debugger ==
Line 53: Line 53:
 
To start debugging you need to execute commands similar to the following:
 
To start debugging you need to execute commands similar to the following:
  
# set address of the machine the Eclipse DLTK is running on
+
\# set address of the machine the Eclipse DLTK is running on
 
set DBGP_RUBY_HOST=192.168.3.135
 
set DBGP_RUBY_HOST=192.168.3.135
# set ide key specified in the remote launch configuration
+
\# set ide key specified in the remote launch configuration
 
set DBGP_RUBY_KEY=REMOTE-DEBUG-1
 
set DBGP_RUBY_KEY=REMOTE-DEBUG-1
# set port (can be configured in preferences)
+
\# set port (can be configured in preferences)
 
set DBGP_RUBY_PORT=10000
 
set DBGP_RUBY_PORT=10000
# start ruby where START.rb is the main file of the application.
+
\# start ruby where START.rb is the main file of the application.
 
c:\ruby\bin\ruby.exe -I C:\DLTK-RUBY-DBG -r FastRunner.rb START.rb
 
c:\ruby\bin\ruby.exe -I C:\DLTK-RUBY-DBG -r FastRunner.rb START.rb
 
                                   --
 
                                   --

Revision as of 21:50, 15 January 2009

This document describes how to start remote debugger using fast ruby debugger (ruby-debug gem).

Extract DLTK ruby code

You need to extract .rb files from the following plugins - org.eclipse.dltk.ruby.abstractdebugger - org.eclipse.dltk.ruby.fastdebugger

for example I have extracted them to the C:\DLTK-RUBY-DBG, now that folder contains the following files:

- C:\DLTK-RUBY-DBG\AbstractRunner.rb - C:\DLTK-RUBY-DBG\FastRunner.rb - C:\DLTK-RUBY-DBG\common\FileLogManager.rb - C:\DLTK-RUBY-DBG\common\Logger.rb - C:\DLTK-RUBY-DBG\common\NullLogManager.rb - C:\DLTK-RUBY-DBG\common\Params.rb - C:\DLTK-RUBY-DBG\common\StdoutLogManager.rb - C:\DLTK-RUBY-DBG\dbgp\BreakpointElement.rb - C:\DLTK-RUBY-DBG\dbgp\CaptureManager.rb - C:\DLTK-RUBY-DBG\dbgp\Command.rb - C:\DLTK-RUBY-DBG\dbgp\CommandHandler.rb - C:\DLTK-RUBY-DBG\dbgp\Communicator.rb - C:\DLTK-RUBY-DBG\dbgp\DbgpThread.rb - C:\DLTK-RUBY-DBG\dbgp\ErrorElement.rb - C:\DLTK-RUBY-DBG\dbgp\ErrorMessages.rb - C:\DLTK-RUBY-DBG\dbgp\InitPacket.rb - C:\DLTK-RUBY-DBG\dbgp\PropertyElement.rb - C:\DLTK-RUBY-DBG\dbgp\PropertyUtils.rb - C:\DLTK-RUBY-DBG\dbgp\Response.rb - C:\DLTK-RUBY-DBG\dbgp\SourceManager.rb - C:\DLTK-RUBY-DBG\dbgp\StackLevelElement.rb - C:\DLTK-RUBY-DBG\dbgp\StreamPacket.rb - C:\DLTK-RUBY-DBG\dbgp\ThreadEventHandler.rb - C:\DLTK-RUBY-DBG\dbgp\ThreadManager.rb - C:\DLTK-RUBY-DBG\dbgp\Utils.rb - C:\DLTK-RUBY-DBG\dbgp\XmlElement.rb - C:\DLTK-RUBY-DBG\debugger\AbstractBreakpointManager.rb - C:\DLTK-RUBY-DBG\debugger\AbstractContext.rb - C:\DLTK-RUBY-DBG\debugger\AbstractDebugger.rb - C:\DLTK-RUBY-DBG\debugger\BreakpointContracts.rb - C:\DLTK-RUBY-DBG\debugger\DebugEventHandler.rb - C:\DLTK-RUBY-DBG\debugger\Exceptions.rb - C:\DLTK-RUBY-DBG\debugger\FeatureManager.rb - C:\DLTK-RUBY-DBG\debugger\SimpleBreakpoints.rb - C:\DLTK-RUBY-DBG\debugger\StackLevelInfo.rb - C:\DLTK-RUBY-DBG\fast\FastBreakpointManager.rb - C:\DLTK-RUBY-DBG\fast\FastContext.rb - C:\DLTK-RUBY-DBG\fast\FastDebugger.rb - C:\DLTK-RUBY-DBG\fast\FastLineBreakpoint.rb

Start debugger

To start debugging you need to execute commands similar to the following:

\# set address of the machine the Eclipse DLTK is running on set DBGP_RUBY_HOST=192.168.3.135 \# set ide key specified in the remote launch configuration set DBGP_RUBY_KEY=REMOTE-DEBUG-1 \# set port (can be configured in preferences) set DBGP_RUBY_PORT=10000 \# start ruby where START.rb is the main file of the application. c:\ruby\bin\ruby.exe -I C:\DLTK-RUBY-DBG -r FastRunner.rb START.rb

                                 --