- 1 Debug
- 1.1 Enhanced Expressions
- 1.2 OS Resources View
- 1.3 Breakpoint Filtering
- 1.4 Enhanced GDB console support
- 1.5 Breakpoint actions to control reverse debugging
- 1.6 Floating Point renderer has been added to the memory package
- 1.7 Debugging multiple processes within one debug session
- 1.8 Load information in the Multicore Visualizer - CPU/core load meters
- 1.9 Edit Tracepoint on Create
- 1.10 Step Into Selection
- 2 Important Notes
The Expressions view has been extended to allow the user to manually create enhanced-expressions. Enhanced-expressions define a set of expressions which can be easily described using glob-pattern matching. The user specifies an enhanced-expression by prefixing it with '='. For example:
- pattern-matched sorted groups of local variables, where the symbols *  ? can be used e.g.,
=v?r -- Will show local variables starting with a 'v' and ending with 'r' with a single character in between =* -- Will show all local variables of the selected stack frame in sorted order (the '=' is optional for this expression, i.e., '*') =*x -- Will show local variables ending with 'x'
- array ranges including glob-expressions
=array[30-40] -- Will show array elements from 30 to 40 =array[1-5,20,30-31] -- Will show array elements from 1 to 5, 20 and 30 to 31 =array?[1-5] -- Will show array elements from 1 to 5 for any array starting with 'array' followed by a single character
- pattern-matched sorted registers groups, where the symbols *  ? can be used e.g.,
=$e?x -- Will show all registers starting with 'e' and ending with 'x' with a single character in between =$* -- Will show all registers (the '=' is optional for this expression, i.e., '$*') =$*x -- Will show registers ending with 'x' =$st[3-5] -- Will show registers $st3, $st4, $st5
- semi-colon-separated, individually sorted groups of expressions, e.g,
var1; var2 -- Will create a group containing both var1 and var2 $eax; var1 -- Will show a group containing register $eax and variable var1 var1; =$e* -- Will show a group containing variable var1 as well as all registers starting with 'e'
This feature allows to quickly define multiple expressions that interest the user. Because groups are created from these special expressions, they can be collapsed when uninteresting and re-expanded later, without having to be re-entered by the user.
Note that the comma (,) is not allowed as a group separator as it is used within valid expressions that use templates (e.g., ((((((class std::_Vector_base<int, std::allocator<int> >) v))._M_impl))._M_start)).
OS Resources View
CDT has a new view called "OS Resources". This view will display different information about the resources of the operating system. For example, it can give a list of all processes running on the target. The view will display the information as provided by GDB.
As of writing, GDB supported the following information:
Processes - Listing of all processes Process groups - Listing of all process groups Threads - Listing of all threads File descriptors - Listing of all file descriptors Sockets - Listing of all internet-domain sockets Shared-memory regions - Listing of all shared-memory regions Semaphores - Listing of all semaphores Message queues - Listing of all message queues Kernel modules - Listing of all loaded kernel modules
- For performance reasons, the view is not automatically refreshed. Press the Refresh button on the the view toolbar to fetch the latest information. Hovering over this Refresh button will display the time at which the information was last obtained.
- Columns can be re-sized.
- Columns can be removed or added using the view menu.
- Entries can be ordered by column by pressing on the column header.
- When doing debugging of a remote target, the information in the view pertains to the remote target.
This feature requires GDB 7.5 and higher. Furthermore, as of GDB 7.5, this feature only works for Linux.
This feature was completed on September 20th, 2012. For details see Bug 360314.
The CDT has enhanced the standard behavior of the "Show Breakpoints Supported by Selected Target" option of the Breakpoints view. Using this option with the CDT will now only show breakpoints that are actually applicable to the current debug session. Therefore, when debugging a C/C++ application, the user will not be bothered with the breakpoints set in the code of an another C/C++ application.
For backwards-compatibility, a preference is provided to revert this new behavior to the original one. The original behavior of this option is to have the Breakpoints view show all breakpoints that are of the same type as the current debug session. For example, if debugging Java, only Java breakpoints would be shown, and if debugging C/C++ only C/C++ breakpoints would be shown. This preference can be found under "C/C++ -> Debug -> GDB -> Use aggressive breakpoint filtering".
This feature was completed on October 26th, 2012. For details see Bug 360735.
Enhanced GDB console support
CDT is being improved to update its views with any change made to GDB by the user from the GDB console. Updates are being added gradually and the final goal is to allow the user to perform any command from the GDB console, and have CDT stay synchronized with the changes.
Breakpoints, watchpoints and tracepoints
Breakpoints, watchpoints or tracepoints set from the GDB console are now shown in the Breakpoints view. All breakpoint related GDB commands are supported and synchronized with the UI. No support for catchpoints yet. This feature requires GDB 7.4 or higher.
This feature was completed on November 29th, 2012. For details see Bug 392512.
Memory and variables
Memory and variables modified from the GDB console are now updated in the Memory, Memory Browser, Variables and Expressions views. This feature requires GDB 7.6 or higher.
This feature was completed on January 26th, 2013. For details see Bug 397715.
Reverse debugging state
CDT will now properly update the status of reverse debugging if its state is modified through the GDB console. This feature requires GDB 7.6 or higher.
This feature was completed on January 31st, 2013. For details see Bug 399163
Breakpoint actions to control reverse debugging
It's now possible to control the enabling, disabling and toggling of the reverse debugging mode, through breakpoint actions. The reverse debugging mode can be useful to debug, but has a significant performance cost when enabled. Using the new breakpoint action to enable the reverse debug mode, one can program a breakpoint to enable that mode in the vicinity of the suspected source code. That way, until that point is reached, no performance impacts are felt.
To use this feature, right-click on a breakpoint and select "Breakpoint Properties". Then in the left page, chose "Actions". Then click "New". In the new dialog, select the Action Type "Reverse Debug Action". Then chose if the action should enable, disable or toggle the reverse debug mode. Finally chose a name for the action. When done, click "Ok"
The newly created action will appear in the list of available actions, that can be attached to any breakpoint To attach it to the current breakpoint, click on "Attach".
Note: For the reverse debug breakpoint actions to work, reverse debugging must be available in the current debug session. For instance, it will not work if the "non-stop" mode is active.
This feature was completed on December 13th, 2012. For details see Bug 365776.
Floating Point renderer has been added to the memory package
A floating point render has been added to the memory package. So now there is the Traditional renderer and a Floating Point renderer available. This render allows display and editing of the floating point values. Since it originated from the Traditional render, it's workflow and style are similar. There is no ASCII data pane display, since this did not seem to make much sense with floating point data.
This feature was completed on November 16th, 2012 as part of Bug 394509.
Debugging multiple processes within one debug session
Debugging a new executable in the same debug session has been improved for GDB versions starting from 7.2. "Debug New Executable" action has been added to the context menu of the Debug view.
The dialog for specifying an executable to debug for local sessions has been changed.
The ability to debug a remote executable using gdbserver has been added.
This feature was completed on January 25th, 2013. For details see Bug 344890.
Load information in the Multicore Visualizer - CPU/core load meters
The Multicore Visualizer view has been enhanced to support system load monitoring, in the form of graphical load meters, showing the load of the system being debugged (local or remote). This works only on Linux targets for now. By default this feature is disabled, as it may cause a bit of increased load when remote-debugging. Here is what it looks-like, when enabled:
When enabled and space permits, a load meter is displayed for each core and also one for each CPU, that shows the average load for all contained cores.
To enable the load meters, one has to use the context menu of the Multicore Visualizer; right-click on the visualizer, go into the "Load Meters" sub-menu and select "Enable Load Meters" :
It's also possible to choose the load meters refresh interval. When the load meters are enabled, a "Refresh Speed" entry is added to the Load Meters sub-menu. There you have a choice of three refresh speeds. Selecting one makes it take effect.
This feature was completed on February 28th, 2013. For details see Bug 396268.
Edit Tracepoint on Create
It is no longer necessary to first create a CDT Tracepoint, then edit its properties. Properties such as enabled, pass count, condition, can be set while creating the tracepoint.
There are different methods to open the properties dialog before creating the Tracepoint. First, using the editor popup menu by right-clicking on the editor gutter, one must set the Breakpoint Type to "C/C++ Tracepoints".
- Add Breakpoint action.
- Select the Add Breakpoint... menu item.
- This brings up the tracepoint properties dialog for a line tracepoint pre-filled with the tracepoint's location.
- Control-Double Click
- Hold the Control key while double-clicking on the editor gutter.
- This brings up the breakpoint properties dialog for a line breakpoint pre-filled with the breakpoints location.
Step Into Selection
With the DSF debugger it is now possible to select a function to step into.
The selected method can be in a different line than the one under execution
The two main methods to do this are
- Using the context menu
- Using the hyper link navigation
Although CDT 8.2 is meant to be a backwards-compatible release, the following exceptions should be noted.
- The package org.eclipse.cdt.dsf.gdb.multicorevisualizer.internal was made API by mistake when first released. It has now been officially marked internal. Note that the package has always had the word 'internal' in its name. We don't believe there are any extenders to this package yet.