- 1 Download
- 2 Features
- 3 Integration
- 3.1 Can I use the Eclipse Chart engine in my own application?
- 3.2 What JARs are needed on the classpath to deploy the Eclipse Chart Engine?
- 3.3 How to configure the Chart Engine environment?
- 3.4 Can I use the Chart Builder in my application?
- 3.5 How do I show a chart in my Eclipse RCP application?
- 4 Chart Output Formats
- 5 Chart Terminology
- 6 Chart Rendering
- 6.1 How do I externalize text that needs to retrieve a runtime value from a locale specific message file?
- 6.2 How do I intercept the chart generation/rendering process and alter the content of the chart using custom business logic?
- 7 Chart Engine Extensions
Where can I get the Eclipse Chart Engine distribution?
The Chart package is included in the main BIRT distribution, but you can get it separately from the download page. Select the BIRT version you need, and choose the Chart Engine distribution (which contains the chart examples plugin). You can also get it from CVS directly, if you wish to get the latest source as well as the unit tests.
What are the supported chart types?
The following table summarizes the available chart types.
|2D||2D with depth
|3D (real 3D rendering)|
|Stock||Candle Stick||Bar Stick||-||yes||no||no|
|Meter||Single Dials||Superimposed Dial||-||yes||no||no|
Can I use the Eclipse Chart engine in my own application?
Yes. A primary goal of the Eclipse Chart Engine project is to provide a package that can be used both with the BIRT reporting components as well as standalone.
As such, it is a complete Charting library with both a Chart Builder UI and a Chart Engine, with an out-of-the-box integration with BIRT. It can run outside of Eclipse as well and provides numerous extension points to add new capabilities, or to integrate in any application.
What JARs are needed on the classpath to deploy the Eclipse Chart Engine?
The following JARs and folders need to be included in your CLASSPATH at build/run time. They are all available in the chart engine download, except for the EMF plugins you need to get from the Eclipse EMF download site. Note that you don’t necessarily need all of those if your application do not use certain functionalities.
Chart engine libraries:
- Any jar from a custom extension plugin you wrote.
Third party dependencies:
- org.mozilla.rhino_1.6.0 (folder)
- org.apache.commons.codec_1.3.0 (folder)
- org.apache.batik_1.6.0 (folder)
- org.apache.batik.pdf_1.6.0 (folder)
- org.apache.xerces_2.8.0 (folder)
Eclipse 3.2 now uses OSGi to load the plugins, so if you want to benefit from the extension mechanism outside Eclipse, you will need the OSGi plugins. If you use STANDALONE (see below), you won’t need them though. Get the BIRT runtime package from the download site to see how plugins are organized outside Eclipse with OSGi support.
How to configure the Chart Engine environment?
Any application using the Chart Engine needs to set either one of those system properties (they should not be used together).
STANDALONE: if you don’t need any extension plugin, like the PDF plugin for instance. No value is needed.
BIRT_HOME: if you need chart extensions plugins to be loaded. Set the value to the directory containing the chart and extensions plugins, such as the PDF plugin (inside a plugins subfolder).
To set the property you can use System.setProperty() or set it in your java command line through –D. Example: java –DSTANDALONE MyApplication
Can I use the Chart Builder in my application?
Yes, the Chart Builder can be used outside of a BIRT report, and can be integrated in any Java environment. Look at the ChartWizardLauncher example in the org.eclipse.birt.chart.example plugin.
The Chart Builder is fully extensible and can take advantage of any chart model/engine extensions you write, it can also be integrated in any Data environment. It has no dependency on other BIRT reporting plugins.
How do I show a chart in my Eclipse RCP application?
You could create a plug-in with a ViewPart extension that creates an SWT canvas and notifies a PaintListener implementation where the chart rendering code may be written. Look at the SWT viewer examples in the examples plugin.
Chart Output Formats
What output formats does the chart engine support?
Internally, the charting engine writes to device independent primitives. This means that any output format may be plugged in by writing a device extension. A device refers to an implementation that translates rendering primitives into a specific file format. Release 2.0 provides the following:
Static images (PNG, JPG, BMP) with optional ImageMap support.
SWT graphics (GC)
SWING graphics (Graphics2D)
SVG (Scalable Vector Graphics)
In addition, custom extensions may be written to support additional file formats.
The device rendering framework is tailored to suit the needs of rendering a comprehensive set of graphics primitives, elaborate text layout (focused on typical usage of text rendering in charts), and event handling. The framework is optimized for performance.
What is the best static output format?
Each format has some advantages, so here is a quick guide to select the best output format for your needs:
SVG has a very good interactivity support, but requires the browser to support SVG. For IE, it means you need to install a SVG plugin.
PNG has a more limited interactivity support, but supports tooltips and hyperlinks through an HTML ImageMap. It is probably the best choice over JPG and BMP as it supports transparency, 32 bits colors, and compression without loss. It is widely supported across browsers. The rendering quality of text is also slightly better than SVG for small fonts, although this should be corrected in a future release.
What chart output formats are supported within BIRT reports?
The following table shows from which version each chart output format is supported in a BIRT report. For instance SVG is supported in HTML reports since version 2.0. Note that GIF support has been dropped in 2.1, and can be safely replaced by PNG.
|Chart Output Format||SVG||PNG||BMP||JPG|
Can the chart package output SVG or PDF?
SVG output is supported from release 1.0.1. It has been contributed by IBM as a chart extension plugin org.eclipse.birt.chart.svg, which is included in the BIRT distribution.
PDF is supported from release 2.1. It has also been contributed by IBM as an extension, and requires the batik, batik.pdf and xerces plugins.
What are the known limitations of SWT rendering?
There are some known SWT issues with Linux, and some anti-alias problems when drawing arcs, but those are relatively minor issues.
What is the difference between "2D with depth" and "3D"?
2D with depth charts are simply 2D charts with a 3D effect. This can make the charts generally look nicer and is normally sufficient for most cases, like Pie Charts or Bar Charts with a single Series. It is theoretically faster to render than 3D charts as there are no 3D computations done.
3D charts are represented by a 3D engine using lighting, real perspective, and allowing rotations. 3D charts are particularly useful for Charts with Axes with multiple series, as it adds a third Z-Axis to plot different series side by side in a third dimension.
What does "Inherit Report Data" do in Chart Builder?
"Inherit Report Data" means that the Chart will use the data available from its container. It only can work if the chart container is a report item such as a table or list item. In this case, depending on the cell where it is located, different rows will be available. A good example is when you place a chart within a group header or footer, the chart will use all the rows for that group, as a data input.
What do "Orthogonal’ and "Base" mean?
This is the old 1.0.x terminology to distinguish between the values plotted on the chart, and what they represent. The 2.0 release now uses Categories (Base) and Values (Orthogonal), as it is more representative. The Categories are plotted on the X-Axis in case of Chart with axes, while the Values are represented on the Y-Axis. Note that this terminology of Base and Orthogonal is still present in the API and code.
How do I externalize text that needs to retrieve a runtime value from a locale specific message file?
This depends on whether you are using the Chart within a BIRT report or in standalone mode.
BIRT Report Context
Several text components in a report design may contain externalized text references. The value of these components would be specified using the format:
As an example, the chart title could be defined as:
At generation/presentation time, a lookup for the value for key=sales.chart.title would be performed against the locale specific property text resource bundle associated with the report design that incorporates the chart instance. If the resource bundle is not found or the externalized message key cannot be located, the default value will be presented.
In that case, you can use the IMessageLookup interface. By implementing it, it will allow the chart engine to retrieve the value of a given key. If the key is not found it will use the default value.
The key and default values are represented by an expression as Key=<default value>. This is set in the chart model for each static text property. At generation time, a lookup is performed for the key with IMessageLookup. If IMessageLookup does not return a value for the key, the default value will automatically be used.
If you are writing a chart extension, you need to make sure your code will support internationalization. Externalized text may be retrieved via the RunTimeContext instance which is available at chart generation time via the following API (independently of BIRT/Standalone):
String externalizedMessage(String key)
How do I intercept the chart generation/rendering process and alter the content of the chart using custom business logic?
Chart Engine Extensions
How do I modify the EMF Chart Model?
In some cases, you might want to update the model to add new types for instance. Note that if you change the model, you will not be able to update to a later version without merging your changes.
The steps are:
- Get the chart engine plugin from CVS
- Update the xsd file in the xsd directory with your model changes, using a xml or schema editor
- In the src/model folder, right click on the model.genmodel file and choose "Reload…"
- In the popup window check the box
- Click next and finish
- Double click on model.genmodel to open it
- Right click on the root Model node and choose "Generate Model". It will update the chart model source code automatically.
How do I write a new series type that uses a custom data element?
An example of a chart type that uses a custom data element that already exists in the system is a Stock series chart. Each data element (held in a stock data set) holds four numerical values:
These four values are encapsulated in a StockEntry class available in package org.eclipse.birt.chart.datafeed
A collection or array of StockEntry instances are wrapped in a StockDataSet instance and associated with a Stock series. At runtime, a StockDataSetProcessor (associated with a Stock series via an extension point definition) is capable of performing the following functions with a StockDataSet:
A] Build a stock data set by parsing a comma separated list of StockEntry values
B] Compute the smallest value of (high, low, open, close) of all StockEntry values
C] Compute the largest value of (high, low, open, close) of all StockEntry values
D] Capable of extracting values from resultset columns and creating StockEntry instances that are fed to a StockDataSet
As can be seen above, the following tasks are needed for a new custom dataset associated with a series:
Task-1: Update the appropriate schema files
Extend …/xsd/model.xsd from plug-in project org.eclipse.birt.chart.engine with a section like this (for the new CustomSeries being added):
<!-- Custom Series -->
Custom series documentation goes here.
<xsd:element name="Property1" type="Type1">
Documentation for Property1 goes here.
<xsd:element name="Property2" type="Type2">
Documentation for Property2 goes here.
Note that the newly added custom series subclasses the component: org.eclipse.birt.chart.model.component.Series
This example illustrates two properties associated with every instance of the newly created CustomSeries
This will result in creation of:
Now, extend …/xsd/data.xsd from plug-in project org.eclipse.birt.chart.engine with a section like this (for the new CustomDataSet being added):
- <!-- Custom Data Set -->
- <xsd:complexType name="CustomDataSet">
|Documentation for new dataset type|
Note that the newly added custom data set subclasses the interface: org.eclipse.birt.chart.model.data.DataSet
This will result in creation of: