SAML2 IdP Deployment 1.0

This page describes how to deploy and configure the Higgins SAML2 IdP. This deployment is a web application that is able to act as a SAML 2.0 IdP endpoint to authenticate users against a Higgins IdAS context. By default, an LDAP context is used, however any technology for which a Higgins context provider exists can be used instead.

In addition, a second web application is provided that acts as a sample relying party to test the IdP. This is not necessary if you have your own SAML 2.0 relying party application.

Note: In SAML 2.0 terminology, the terms "relying party" (RP) and "service provider" (SP) are synonymous.

This page contains instructions on how to deploy and configure the two web applications. See SAML2 IdP Overview 1.0 for more information on how the deployed web applications interact with each other, and see SAML2 IdP Development 1.0 for information on how to check out and build the source code of the involved Higgins components.

Prerequisites

This guide assumes you have the following software:

• Apache Tomcat 5.5 or later (or other servlet container)
• JDK/JRE 1.4 or later

Obtain .WAR files

Two .WAR files (one for the IdP, one for the RP) are automatically built every night and can be downloaded on these pages:

http://www.eclipse.org/higgins/ver2/downloadsnew.php?loc=downloads/saml2idp.server (for installing the SAML2 IdP)

http://www.eclipse.org/higgins/ver2/downloadsnew.php?loc=downloads/saml2idp.test (for installing the SAML2 Test RP)

Click on the Build ID in the "Latest build" row. Download the "war.zip" file and decompress it.

Deploy the web applications on Tomcat

Deploying a .WAR file on Tomcat is usually done by placing the file into the webapps/ directory of Tomcat. Under the default configuration, it will be auto-deployed (i.e. decompressed into a context subdirectory). By default, the name of the .WAR file directly maps to the name of the context, which also becomes part of the URL under which the context can be accessed.

For example, if you are running Tomcat at your website www.example.com, and you place the file saml2idp.server.war in the webapps/ directory, it will be auto-deployed to the webapps/saml2idp.server context subdirectory, and becomes available at the URL http://www.example.com/saml2idp.server/. The SAML endpoint servlet will be at http://www.example.com/saml2idp.server/SAMLEndpoint, and the logout servlet will be at http://www.example.com/saml2idp.server/Logout.

Please refer to the documentation of Tomcat or your other servlet container for more information on how to deploy web applications.

Configure the web applications

Both web applications (saml2idp.server and saml2idp.test) have a conf/ folder that contains configuration files. These can be edited after the web application has been deployed on a production server. Note that the servlets have to be restarted in order for the changes to take effect.

Configure the SAML2 IdP

The saml2idp.server web application project contains the following files in the WebContent/conf folder:

• application.properties: General configuration options for the IdP.
• HigginsConfiguration.xml: Configuration for the Higgins context to be used for authenticating users.
• privkey.der: This is the private key used to sign SAML 2.0 messages. This can be either a DSA or RSA key. The file is expected to have a PKCS8 structure and be in DER (binary) format. If this file does not exist, a warning message is logged and SAML2 messages will not be signed.
• cacert.pem: This is the matching certificate (including a public key) for the private key. It is used for constructing the <KeyInfo> element in XML Signatures in SAML 2.0 messages. The file is expected to have a X509 structure and be in PEM (ascii) format. If this file does not exist, a warning message is logged and SAML2 messages will not be signed.
• rp/*.pem: Every file ending in ".pem" in the rp/ subdirectory is considered to be a matching certificate (including a public key) for the private key of an RP, from which requests should be accepted. It is used to verify XML Signatures in SAML 2.0 messages received from RPs. The file is expected to have a X509 structure and be in PEM (ascii) format.

The private key and certificate files can be created using OpenSSL. See below for a very quick start for creating these files.

The application.properties file contains the following options:

• saml2-issuer: This is a human readable string that will be put into the <Issuer> element of SAML messages.
• saml2-assertion-validity-millis: This is used to construct the value of the NotOnOrAfter attribute of the <Conditions> element of SAML messages.
• accept-acs-urls: This contains a comma-delimited list of ACS URLs that are accepted by the IdP. If a request with an unknown ACS URL is received, the server returns a HTTP 403 Forbidden reply. If the value of this option is "*", all ACS URLs are accepted.
• extract-username-parameter-name: If the value of this option is not empty, then for every incoming authentication request the SAML2 IdP checks if a parameter with that name exists in the request. If yes, then the value of that field is considered to be a username that is already authenticated.
• extract-username-header-name: If the value of this option is not empty, then for every incoming authentication request the SAML2 IdP checks if a header with that name exists in the request. If yes, then the value of that field is considered to be a username that is already authenticated.
• extract-username-cookie-name: If the value of this option is not empty, then for every incoming authentication request the SAML2 IdP checks if a cookie with that name exists in the request. If yes, then the value of that field is considered to be a username that is already authenticated.

Note: The last three options are part of the "Username Extraction" feature, which makes it possible to have the SAML2 IdP issue authentication statements for usernames it does not authenticate itself. If any of the three options is set, and if a parameter/header/cookie with that name is present in a request, then the value of that field is considered to be a username, for which an authentication statement will be issued without any further checks. This is an additional feature of the Higgins SAML2 IdP and not part of SAML 2.0 specifications.

The HigginsConfiguration.xml configures the Higgins IdAS context to be used for authenticating users. By default, an LDAP context is used. You may want to edit several settings in this file:

• The setting Address holds the URL of the LDAP server (e.g. "ldap://localhost:389")
• The setting java.naming.security.principal holds the DN of the principal to bs used to connect to the LDAP server (e.g. "cn=Manager,dc=parityinc,dc=net")
• The setting java.naming.security.credentials holds the password of the principal to be used to connect to the LDAP server (e.g. "secret")
• The setting consumerSubjectIDToProvider contains a JavaScript to transform usernames to LDAP DNs. A DN usually looks like "uid=saba,dc=parityinc,dc=net", but you only want your user to enter "saba" in the web form, therefore this little JavaScript is used to transform the name entered by the user to a full LDAP DN.

Note: If your LDAP server does not require authentication, you can simply omit the java.naming.security.* settings from the configuration.

Configure the SAML2 RP

The saml2idp.test web application project contains the following files in the WebContent/conf folder:

• application.properties: General configuration options for the IdP.
• privkey.der: This is the private key used to sign SAML 2.0 messages. This can be either a DSA or RSA key. The file is expected to have a PKCS8 structure and be in DER (binary) format. If this file does not exist, a warning message is logged and SAML2 messages will not be signed.
• cacert.pem: This is the matching certificate (including a public key) for the private key. It is used for constructing the <KeyInfo> element in XML Signatures in SAML 2.0 messages. The file is expected to have a X509 structure and be in PEM (ascii) format. If this file does not exist, a warning message is logged and SAML2 messages will not be signed.
• idp/cacert.pem: This is the matching certificate (including a public key) for the private key of the IdP. It is used to verify XML Signatures in SAML 2.0 messages received from the IdP. The file is expected to have a X509 structure and be in PEM (ascii) format.

The private key and certificate files can be created using OpenSSL. See below for a very quick start for creating these files.

The application.properties file contains the following options:

• saml2-idp-endpoint: This is the URL of the IdP endpoint. If you deployed the web application on localhost and named it "saml2idp.server", then this URL is http://localhost/saml2idp.server/SAMLEndpoint.
• saml2-rp-endpoint: This is the URL of the RP endpoint. If you deployed the web application on localhost and named it "saml2idp.test", then this URL is http://localhost/saml2idp.test/SAMLEndpoint.
• saml2-providername: This is a human readable string that will be put into the ProviderName attribute of a <AuthnRequest> SAML message.
• saml2-issuer: This is a human readable string that will be put into the <Issuer> element of SAML messages.
• minimal: This setting should contain a boolean value (either "true" or "false"). If set to true, the RP will issue very small <AuthnRequest> SAML messages. They will not contain any sub-elements and only a few attributes such as AssertionConsumerServiceURL, Destination and IssueInstant. In addition, the message will not be signed in "minimal" mode. This setting is only recommended in environments where the length of <AuthnRequest> messages is constrained for some reason.

Notes on OpenLDAP and OpenSSL

This section contains various other helpful information for getting started with the Higgins SAML2 IdP. OpenLDAP can be used as the backend of the Higgins JNDI context provider, and OpenSSL can be used to create the keys used to sign/verify SAML 2.0 assertions.

You may not need the information in these sections if you use other LDAP server software or have other ways of creating keys.

OpenLDAP quick start

http://www.openldap.org/

LDAP TCP port: 389

Check if the LDAP server is running: ps -e -f|grep slapd

Stop the LDAP server: kill -INT `cat /usr/local/var/run/slapd.pid`

Start the LDAP server: /usr/local/libexec/slapd

Location of the LDAP server configuration file: /usr/local/etc/openldap/slapd.conf

How to search for all entries: ldapsearch -x -b 'dc=parityinc,dc=net' '(objectclass=*)'

How to create user saba with password testpass:

• Create a file named saba.ldif:

dn: uid=saba,dc=parityinc,dc=net
objectclass: inetOrgPerson
objectClass: person
uid: saba
cn: Markus Sabadello
givenname: Markus
sn: Sabadello
userPassword: testpass

• Add the entry: ldapadd -x -D "cn=Manager,dc=parityinc,dc=net" -W -f saba.ldif

How to delete user saba: ldapdelete -x -D "cn=Manager,dc=parityinc,dc=net" -W "uid=saba,dc=parityinc,dc=net"

OpenSSL quick start

http://www.openssl.org/

How to generate a DSA private key without password: (this also automatically generates the public key):

openssl dsaparam -out dsaparam.pem 2048
openssl gendsa -out privkey.pem dsaparam.pem

How to convert the private key to PKCS8 structure and DER format:

openssl pkcs8 -topk8 -nocrypt -in privkey.pem -outform der -out privkey.der

How to generate a self-signed certificate in X509 structure and PEM format:

openssl req -new -x509 -key privkey.pem -out cacert.pem -days 1095

Setting up OpenLDAP with TLS (SSL)

This section explains how to 1) set up the OpenLDAP server with TLS support, and 2) how to configure the Higgins JNDI context provider to use a TLS connection to the server.

Reference links:

• http://www.openldap.org/faq/data/cache/185.html
• http://www.openldap.org/doc/admin24/tls.html

How to configure OpenLDAP for TLS

1. Create a certificate request and private key for the server. The common name on the certificate must match the full hostname of the server.

openssl req -new -nodes -keyout newreq.pem -out newreq.pem

2. Create a certificate from the certificate request. This can be done by a commercial certificate authority, or by creating your own like this:

2.a. Create your own certificate authority:

cd /var
mkdir myca
cd myca
/usr/share/ssl/misc/CA.pl -newca

Note: When asked for "CA certificate filename", press enter; Then specify a password and information about your private CA.

2.b. Use your own certificate authority to create a certificate from the certificate request:

/usr/share/ssl/misc/CA.pl -sign

Note: Enter the password you specified when creating the CA.

3. Install the certificate, the private key, and the trusted certificate of the CA:

cp ./demoCA/cacert.pem /usr/local/etc/openldap/cacert.pem
mv ./newcert.pem /usr/local/etc/openldap/servercrt.pem
mv ./newreq.pem /usr/local/etc/openldap/serverkey.pem
chmod 600 /usr/local/etc/openldap/serverkey.pem

4. Configure the OpenLDAP server to use these files:

Add the following lines to /usr/local/etc/openldap/slapd.conf:

TLSCACertificateFile /usr/local/etc/openldap/cacert.pem
TLSCertificateFile /usr/local/etc/openldap/servercrt.pem
TLSCertificateKeyFile /usr/local/etc/openldap/serverkey.pem

5. Optional: Configure the OpenLDAP client applications to use the server certificate:

Add the following line to /usr/local/etc/openldap/lapd.conf:

TLS_CACERT /usr/local/etc/openldap/cacert.pem

6. Stop the LDAP server:

kill -INT `cat /usr/local/var/run/slapd.pid`

7. Start the LDAP server with a special parameter to make it answer to TLS requests:

/usr/local/libexec/slapd -h "ldaps:/// ldap:///"

8. Optional: Use OpenSSL to check if the OpenLDAP server correctly listens to TLS requests, and to see its certificate:

openssl s_client -connect localhost:636

9. Optional: Use the OpenLDAP client applications to access the OpenLDAP server via TLS:

ldapsearch -H "ldap://localhost:389" -x -b 'dc=parityinc,dc=net' '(objectclass=*)'
ldapsearch -H "ldaps://localhost:636" -x -b 'dc=parityinc,dc=net' '(objectclass=*)'
ldapsearch -ZZ -H "ldap://localhost:389" -x -b 'dc=parityinc,dc=net' '(objectclass=*)'

Note: The first command uses a plain text connection. The second uses the SSL port 636. The third uses the StartTLS extension.

How to configure the Higgins SAML2 IdP accordingly

In order for the SAML2 IdP to be able to connect to an LDAP server using TLS, it needs to trust the server's CA.

1. Import the certificate of the server's CA into a Java keystore file, using the keytool provided with JDKs:

keytool -keystore ldapks.jks -import -file cacert.pem -alias cacert

Note: Choose any password for the keystore.

2. Change the relevant sections of the HigginsConfiguration.xml file to use the StartTLS mechanism and the keystore file:

<Setting Name="AddressList" Type="htf:list">
  <Setting Name="Address" Type="xsd:string">ldap://graceland.parityinc.net:389</Setting>
</Setting>
<Setting Name="env" Type="htf:map">
  <Setting Name="java.naming.security.authentication" Type="xsd:string">none</Setting>
  <Setting Name="java.naming.ldap.attributes.binary" Type="xsd:string">guid</Setting>
  <Setting Name="org.eclipse.higgins.idas.cp.jndi.startTLS" Type="xsd:string">true</Setting>
  <Setting Name="org.eclipse.higgins.idas.cp.jndi.trustStore" Type="xsd:string">/opt/tomcat/webapps/saml2idp-server/conf/ldapks.jks</Setting>
</Setting>

Note: The hostname in the ldap:// URI must match the name in the LDAP server's certificate (i.e. use the real hostname, not localhost).

Note: This uses no authentication to connect to the server. If authentication is required, see step 3

3. (Optional, depends on server configuration) Connect with authentication:

If the server requires the client to authenticate in order to connect, the above configuration has to be changed like this:

<Setting Name="AddressList" Type="htf:list">
  <Setting Name="Address" Type="xsd:string">ldap://graceland.parityinc.net:389</Setting>
</Setting>
<Setting Name="env" Type="htf:map">
  <Setting Name="java.naming.security.authentication" Type="xsd:string">simple</Setting>
  <Setting Name="java.naming.security.principal" Type="xsd:string">cn=usr,dc=company</Setting>
  <Setting Name="java.naming.security.credentials" Type="xsd:string">secret</Setting>
  <Setting Name="java.naming.ldap.attributes.binary" Type="xsd:string">guid</Setting>
  <Setting Name="org.eclipse.higgins.idas.cp.jndi.startTLS" Type="xsd:string">true</Setting>
  <Setting Name="org.eclipse.higgins.idas.cp.jndi.trustStore" Type="xsd:string">/opt/tomcat/webapps/saml2idp-server/conf/ldapks.jks</Setting>
</Setting>

Further information

For information on how to check out and build the source code of the involved Higgins components, see here: SAML2 IdP Development 1.0